Psc25pswa Ss Parts

Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more

Pulled down the existing drain tube and installed new one. Tight area so it requires two hands to push up and attach the new tube. The short rubber tubing attached to the new drain tube has to fit snug onto the plastic tube connection that hangs down. Replacing the water dispenser tray is simple and no explanation needed, Read more

When I first removed the shelves to see where the water was leaking from, I didn't know that one of the shelves had a removable pan glass. As I removed its shelf, the glass fell out and of course it broke. I was able to locate the leak coming from a rusted drain trough assembly. I watched the video showing how to replace it on a GE refrigerator and saw that it was an easy repair. I ordered a new cover pan glass and drain trough assembly. They arrived in good time. The repair was quite... Read more

Replaced the water supply valve...boom! Read more

Replaced with new parts. Read more

Replaced the drain pan below the evaporator coil (it was rusted to the point had a hole in it) and decided to replace both drain tubes since I had to open up the back panel. The video on the website was very helpful. Thanks!! Read more

Replace solenoid, flapper door and recess spring. Really only needed solenoid, but other parts were so inexpensive and I knew I would already be in there. Read more

The auger in ice bucket was frozen and locked in place (some how liquid water must have spilled inside and froze the shaft and bushing). When the motor was activated to deliver ice, the jam caused the motor shaft to strip the threads. With the threads stripped, there is no way (that I could find) to get the drive auger off of the shaft (btw, it is left-hand threaded). Apparently the Drive Auger is made of stainless steel - a harder metal then the motor shaft. To repair it, I removed the... Read more

Replaced springs, flapper assembly and ice door retainer as described in videos and it was easy. So far so good..water dispenses. Read more

The replacement drawer you sent was a perfect match - it slid right into the rails on the shelf as if I was simply putting back the original drawer after washing it. Read more

Ordered replacement shelves Read more

I replaced the lever asm. and spring Read more

Easy fix, just like replacing an old water filter. Read more

I replaced the fan and heater element. The replacement was not an exact match. I had to adjust the parts to get the harness to fit the plug was not the correct size. I cut it off and used the existing plug. Not a big deal and everything else fit. Pretty good for a twenty year old replacement. Also the heater element was a different shape but it fit as is. Read more