Pss262grbww Parts

Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more

I ordered my parts. It was a breeze thanks to appliancepartspros.com. I received the parts the next day. Installed them myself. Read more

GE refrigerator 12 years old and we love it. Ordered compressor overload and compressor start relay video's were great made the replacement easy. I also ordered the control board because I felt this was the real culprit again the video was the best. With all the parts replaced GE profile refrigerator has been working like new. Thank you AppliancePartsPro.com Read more

Replaced two drawers, one shelf front, and the grille base Read more

Initially cleaned -wife using smaller hands. Better idea to review why there is no SOP on the matter, and replace the part. While pricing the door discovered nice pricing on drip tray, and while at it the touch pad was cracking, as well as the freezer slide out handles broke (and we thought they were just covers), so bought all we thought we could use. Disassembly was a little concerning due to never disassembled since bought. But all was easy enough. Using a pry-tool putty knife we disengaged... Read more

I looked for a site that sold replacement parts for my make of GE refrigerator. I found AppliancePartsPros, and was very surprised at how organized it was. By entering the model number of my refrigerator, I was shown a set of (approximately) 8 general parts diagrams for my refrigerator. I chose the ice making/dispensing diagram. I matched the part that shattered (from use) to what was on the diagram. What I didn't know was how to install the part. I saw references by other customer comments to... Read more

My fridge's meat drawer (the drawer with "Deli Fresh" on it) became cracked on the front and needed to be replaced. It took quite a while of looking at this website's diagrams to figure out that what I needed to order is called "Pan ASM Top." Drawer arrived in 2 days, and all I had to do was remove the old drawer and slide in the new one. It's a little tricky -- check the fridge's instruction manual if you need to. Read more

Watched your videos and easily replaced the solenoid, spring, flapper etc. The only reason it took me as long as it did is I have a GE monogram side-by-side in cabinet refrigerator. It is stainless steel and required me to take off all of the stainless steel skin on the freezer side door. While this was not that difficult it was time-consuming. Read more

This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more

Pop out the old switches with a putty knife pressing down on the tab, grabbed with pliers to pull out, disconnect the wires and connect new switches, pressing back in place. Read more

Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more

I looked for a site that sold replacement parts for my make of GE refrigerator. I found AppliancePartsPros, and was very surprised at how organized it was. By entering the model number of my refrigerator, I was shown a set of (approximately) 8 general parts diagrams for my refrigerator. I chose the ice making/dispensing diagram. I matched the part that shattered (from use) to what was on the diagram. What I didn't know was how to install the part. I saw references by other customer comments to... Read more

• Door won't open or close

The fix involved removing the two bolts holding the broken door stop and bolting in place the new stop. Unless you take the door off, you have to work by feel due to the position of the door stop and the bolts holding the stop in place. A little patience is all that's required. A flip lock designed to keep kids out of cupboards is now in place so the damage won't reoccur. But if it does, its a quick, easy and inexpensive fix. Read more

I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more

I ordered the parts which was easy to order through the internet and received them in a matter of days. I replaced them myself following the video instructions which were easy and simple to understand. Read more

I ordered the parts from this website. I ordered the parts on Monday and they arrived on Tuesday. The trays look great and were easy to install. Read more