Pvm 9005Sj3ss Parts

The Fuse is an OEM part for GE microwaves. It serves as a safety device that protects the microwave by breaking the circuit if there is a power surge or electrical fault. This helps prevent damage to the microwave's components and ensures safe operation.

You should replace the fuse if it becomes blown or damaged. Causes of a bad fuse can include power surges, electrical faults, or issues within the microwave such as overheating. These factors can cause the fuse to blow, rendering the microwave inoperable.

Symptoms of a bad fuse include:

• The microwave not turning on or suddenly losing power
• No response from the microwave’s control panel
• The microwave stopping mid-cycle without completing the cooking process

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement light socket restores safe, consistent power to the appliance light. If the original socket is heat-damaged, loose, or shorted, installing a new socket brings back reliable illumination and solid electrical contact.

• Provides the electrical connection and physical support for the light bulb
• Replaces cracked, scorched, or worn sockets that cause poor contact
• Helps resolve a light that won't turn on, flickers, or works intermittently with a known-good bulb
• Designed for a secure fit to maintain dependable lighting performance

• Disconnect power at the breaker before servicing.
• Allow the area to cool before working near any heated light cavity.
• Transfer wires one at a time (or take a quick photo) to ensure correct reconnection.
• Install a bulb type and wattage specified for your model; avoid touching bulb glass with bare hands if your model uses a halogen lamp.

This mounting plate assembly is the rear wall bracket that supports and secures the microwave during installation. Replacing a bent or missing plate ensures a safe, level mount and stable operation without vibration or shifting.

• Acts as the rear-wall support the microwave hangs on and bolts to
• Maintains proper, level alignment of the unit and door
• Helps prevent vibration, rattling, or shifting during use
• Replace if the plate is bent, damaged, corroded, or missing

• Disconnect power and have a second person support the microwave before removal/installation
• Follow your model's installation template and manual for hole locations and hardware
• Fasten to wall studs or appropriate anchors; level the plate before tightening
• Verify clearances and door swing before fully tightening mounting hardware

This turntable coupler connects the microwave's turntable motor to the glass tray to drive smooth rotation during cooking. Replacing a worn coupler restores even heating and prevents the tray from slipping, stalling, or wobbling. What it does:

• Transfers rotation from the turntable motor to the glass tray
• Centers and supports the tray for stable, even spinning
• When worn or cracked, may cause the turntable not to turn, slip, wobble, or click/grind at the center hub
• Helps restore consistent heating by ensuring proper tray movement

• 1 turntable coupler

• Disconnect power by unplugging the microwave or switching off the breaker before service
• Remove the glass tray and roller ring; lift the old coupler straight up off the motor shaft
• Align the new coupler with the shaft and press firmly until fully seated

The Interlock Switch Lever is an OEM part for GE microwaves. This mechanical component works with the microwave door interlock switch to disable power to the unit when the door is open.

Symptoms of a bad interlock lever include:

• Microwave remaining powered on with door open  
• Delayed enabling or disabling of power when opening/closing door
• Loose or unstable door closing and sealing

Causes can be normal wear from repeated opening and closing of the microwave door over many years of use. The lever and its surrounding components experience stress with every operation.

This GE part is also compatible with Hotpoint, RCA, and select Kenmore models.

This hood damper assembly opens to allow exhaust airflow and closes to help block outside drafts and odors when the fan is off. It restores proper venting and prevents back-drafts in over-the-range hoods and microwaves. What it does:

• Opens with the vent fan to let cooking smoke and steam exit the home.
• Closes when the fan is off to reduce backdrafts, outside air, and odors.
• A faulty or stuck damper can cause reduced airflow, rattling noises, or air blowing back into the kitchen.
• Works as the moving flap between the appliance exhaust and the ductwork to control airflow direction.

• Disconnect power to the appliance (unplug or shut off the circuit breaker) before servicing.
• Access typically requires removing the hood or microwave grille/cover; keep track of screws and mounting hardware.
• Basic hand tools (screwdrivers, possibly a nut driver) are usually sufficient; handle the damper flap gently to avoid bending.
• After installation, restore power and run the fan to ensure the damper opens and closes smoothly.

This latch body is the door latch component that secures the appliance door during operation, restoring reliable closure so cycles can run normally. Use it to replace a worn or damaged latch that won't hold the door closed. What it does:

• Engages the door striker to hold the door closed and maintain a proper seal during operation
• Works with the door latch mechanism so the appliance can complete cycles that require a closed door
• Common symptom: door won't stay closed, is difficult to latch, or feels loose at the latch point
• Replacing a damaged latch body can prevent intermittent door-open errors and restore normal door operation

• Disconnect power (unplug or turn off circuit breaker) before starting any repair
• Remove the door or access panel as needed; keep track of fasteners and any trim pieces
• Handle door glass and trim carefully to avoid damage; test latch engagement before full reassembly

This 50-watt halogen lamp restores bright, reliable lighting in your appliance. Replace a burned-out bulb to see clearly while cooking and checking food progress, keeping the cavity or cooktop area illuminated as designed.

• Provides focused illumination for the interior cavity or cooktop/task lighting
• Restores light when the door opens or the light pad/switch is used
• Common symptoms: no light, dim or flickering light, or darkened/burned-out bulb
• Using the correct 50-watt halogen rating helps protect the socket and wiring

• Disconnect power (unplug or switch off the breaker) before replacing the lamp
• Allow the lamp and surrounding area to cool completely
• Do not touch the glass; handle with clean gloves or a tissue to avoid oil contamination

This temperature-control thermostat senses compartment heat with a capillary bulb and cycles the heating circuit to maintain your set temperature. Replacing a worn thermostat restores more consistent performance and helps correct underheating, overheating, and erratic temperature swings.

• Regulates heat to match the temperature you set
• Senses temperature via an integral capillary tube and sensor bulb
• Opens and closes contacts to control the heating element or burner
• Failure symptoms can include long warm-up, inaccurate temps, overheating, or uneven results

• Disconnect power and, if applicable, shut off gas; allow the unit to cool completely.
• Handle the capillary tube carefully—do not kink, crease, or cut it.
• Route the sensor bulb and tubing through original clips and path for accurate sensing.
• After installation, perform temperature calibration per service instructions if required.

This manufacturer-supplied OTR hardware bag contains the mounting and fastener pieces used to secure an over-the-range microwave during installation or reinstallation, helping restore proper attachment and stability. What it does

• Provides the manufacturer-specified mounting hardware used to fasten an over-the-range unit to the cabinet and wall.
• Replaces missing or damaged fasteners that can prevent secure installation.
• Helps correct issues like a loose, rattling, or improperly seated OTR microwave.
• Intended to be used with the appliance's original mounting points and installation instructions.

• Follow the appliance manufacturer's installation instructions exactly; hardware must match the installation procedure for your model.
• Disconnect power before working on the appliance and ensure the unit is supported during installation.
• Use appropriate tools and, when lifting or positioning the microwave, have a second person assist to avoid injury or damage.

This gas sensor monitors moisture levels during sensor-cook cycles so the control can adjust time and power for consistent results. Replacing a failed sensor restores reliable sensor-cook performance. What it does:

• Detects steam/vapor inside the cavity and sends feedback to the control board
• Helps the appliance automatically set or adjust cooking time on sensor settings
• Failure symptoms can include sensor-cook not starting, stopping early, or running too long
• May trigger "Sensor" or general error messages related to sensor-cook functions

• Disconnect power before servicing; if working on a microwave, discharge the high-voltage capacitor
• Access is typically behind the control panel or air channel; avoid touching/contaminating the sensing surface
• Transfer any mounting clips/brackets and ensure the wiring connector is fully seated
• After installation, run a simple sensor-cook test to confirm operation

Made by GE. This microwave stirrer motor comes with a square shaped shaft and is usually located in the upper part of the microwave. For a D shaped shaft turntable motor order WB26X10038.

This control panel assembly is the front user interface for your appliance, letting you select settings and start cycles. Replace a cracked or unresponsive panel to restore dependable button response and a clean, factory look.

• Provides the front control interface used to set functions and start/stop operation
• Replaces panels that are cracked, faded, or misaligned
• Restores proper fit and support for user interface components

• Disconnect power at the breaker before servicing; allow any capacitors to discharge
• Remove screws/trim securing the panel and support it to protect attached wiring
• Carefully release ribbon cables/connectors; avoid creasing or pulling on the traces
• Transfer any reusable hardware as needed and test operation before final reassembly

This glass light cover shields and diffuses the cooktop light, protecting the bulb from heat, grease, and splatter while maintaining clear, even illumination over your cooking surface.

• Covers and protects the cooktop light bulb
• Diffuses light for more even illumination and reduced glare
• Helps keep grease and debris out of the light cavity
• Replace if cracked, missing, discolored, or not staying secured

• Disconnect power to the appliance before servicing and allow the area to cool
• Support the cover while removing any retaining screw(s) or release tabs
• Reuse original hardware/clips as applicable and seat the cover fully
• Restore power and test the light for proper operation

This AC synchronous motor drives timed or fixed-speed rotations in compatible appliances to restore reliable timing and rotation. Ideal when a worn motor prevents timers, clocks or small gear-driven functions from operating. What it does:

• Turns at a constant, AC-synchronous speed to drive timers, clocks or small mechanical linkages.
• Replaces a failed or noisy timer/clock motor to restore timed functions.
• Common symptoms: appliance clock or timer won't advance, no rotation of small mechanisms, or intermittent timer operation.
• Operates as a direct replacement for the listed part number when matched to the appliance's OEM specification.

• Always disconnect power at the breaker or unplug the appliance before starting any repair.
• Note or photograph original wire locations and mounting orientation to ensure correct reconnection.
• Use basic hand tools; some models require removing a control panel or control box to access the motor.

This factory glass panel replaces a cracked, shattered, or missing original, restoring a clean, safe cover/viewing surface on your appliance. It helps protect internal areas from splatter and keeps the assembly looking and fitting the way it should.

• Replaces a damaged glass component within the original assembly on applicable models
• Restores a clear, smooth surface for proper appearance and function
• Helps shield underlying parts from spills, grease, and debris
• Common symptoms: cracked or shattered glass, missing piece, sharp edges, looseness/rattling

• Disconnect power before servicing; allow all surfaces to cool
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Support the panel/door during removal and installation to prevent stress on frames/hinges