Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces broken or cracked door closure lever assembly in your refrigerator. Installs at base channel under kickplate to help doors close properly.
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more
Seals freezer door to prevent frost buildup and air leaks. Replace if torn, warped, or causing moisture issues. Verify fit with your model number.
Ordered replacement seals for both freezer and refrigerator sides. Followed directions that I had found on YouTube. The installation in a nut shell is warm the seals in a bathtub with very hot water for at least 2-3hrs then place the seals. Then warm the seals with a hair dryer as needed. After getting the seals out of the hot bath the installation took all of 20-25 minutes for both seals. Read more
Replace your broken, cracked, or missing refrigerator freezer glass shelf. Includes glass and plastic frame for secure storage in the freezer compartment.
Ordered the part and slid it in the shelf holder, when it arrived. Fit perfectly. Read more
Replacement rear wheel for refrigerators. Mounts to the bottom rear frame to enable smooth rolling for cleaning and repositioning. Order if cracked or missing.
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more
Left side glide rail for refrigerator ice bucket. Mounts to freezer wall to support and guide ice bucket. Replace if cracked, broken, or missing.
It was quick and simple to replace. There were a couple screws holding it in place ant the repair was completed in less than 10 minutes. Appliance Parts Pros exceeded my expectations by delivering my part sooner than expected. Read more
Replaces a worn or broken door closure cam on your refrigerator's fresh food door. Installs at the bottom of the door to engage the latch mechanism.
Refrigerator won't cool or compressor won't start? This compressor start relay and overload powers the compressor during cooling cycles. DIY repair.
We isolated a burning smell in our kitchen to our refrigerator, GE Profile PSS23MGTCCC which we purchased in November of 2006. This occurred at 3AM on 29 January 2015 and I am thankful that my wife got me up to investigate this odor. I unplugged the refrigerator. I plugged the refrigerator back in at 6AM thinking it had time to cool. The burning smell happened immediately and I unplugged the refrigerator again right away. My son in-law looked up some possible issues that could have... Read more
Ice won't dispense or auger spins freely? The drive coupler connects the motor to the auger. Moderately easy DIY repair with pliers and patience.
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more
Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.
I replaced the lever asm. and spring Read more
Replacement set screw for refrigerator door handles. Secures handle assembly to door. Needed when original screw is lost, stripped, or damaged.
I ordered the replacement handle parts based on the model number. Read more
Channels water from the fill tube into the icemaker mold. Replace if cracked, broken, or dislodged, causing water leakage or ice buildup in freezer.
Replaced the stripper and fill cup - turns out that the fill cup came with the locking tab broken off. The stripper had a missing paddle, and ice cubes would jam and shut down the ice maker periodically. Let the ice maker warm up after you remove it so the plastic is not so brittle. You have to pry the old stripper out. Make sure the new one locks all across the front. My refrigerator has the ice maker mount toe the side instead of from the hangers in back. I wasn't sure how to remove it,... Read more
Pan cover wheel for refrigerator fresh food drawers. Replace this roller if worn, cracked, or broken to restore smooth drawer sliding and support.
Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more
Clear plastic door cover for the dairy compartment in your refrigerator door. Replace if cracked, broken, or missing. Snaps into place, no tools needed.
The door from ApplianceParts Pros snapped into place easily and corrected the problem. Read more
Replaces a broken or worn freezer door cam closure on side-by-side refrigerators. Installs on the door to control opening range and secure latching.
Watched an online repair video first. Then removed hex head screws on bottom of door. Replaced broken part. Read more
Removes contaminants from your refrigerator's water supply. Replace every 6 months or when water flow decreases. Verify fit with your model number.
Replace the parts of water filter housing and tube assembly. Read more
Fix inconsistent temps or ice buildup on evaporator coils? This sensor seal protects accuracy. DIY-friendly with wire splicing. Video guide available.
This fridge has had a problem of ice building up around evaporator coil in fresh food side. Wife (she HATES this thing) says it's done this from day one; 10 years. GE guy says all these models do this and there's no fix for it, so we have clean out the ice periodically... Like the 1940s pre auto defrost. Now with the issue of FF side temp too highi assumed the ice had built up around FF evaporator coil preventing proper cooling, but AppliancePartsPros.com suggested the FF temp thermistor may... Read more