Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Replaces the shaft inside your refrigerator's freezer door handle. Needed when the internal plastic sleeve snaps, cracks, or breaks, causing the handle to detach.
I looked at the blow up drawing to figure out what parts I might need. I then watched a you tube video to see how to take the handle off. I kind of figured out on my own how to remove the ruined cap handle. It took me a few minutes to figure it out and more time to remove both the handle and the broken part. Turns out I did not need the spring nor the shaft cap handle. Very proud of myself. Saved a huge amount of money. Only problem was that I could only put in one screw as the previous... Read more
Seals refrigerator door to prevent cold air loss and maintain temperature. Replace if torn, loose, or causing condensation. Confirm fit with your model.
Replaced the seal and leveled the refrigerator. Read more
Fixes loud buzzing or grinding noises from your refrigerator's cooling fan. This brushless DC motor restores quiet operation. Moderate DIY repair.
Replaced the fan that circulates the air. Read more
Fix refrigerator door not sealing or door open error with a new magnetic seal. Helps maintain temperature and reduce energy use. DIY install under 1 hour.
Ordered leg. Cover and magnet switch. I did not need magnet switch, it came on the new leg cover. Read more
Replacement right door bin guard assembly for your refrigerator. Replaces broken, cracked, or missing guards that secure door bins in place. Simple lift-out installation.
I was thoroughly confused by the AppliancePartsPros website - this is not my forte! - but the wonderful customer service rep listened to my vague end-user non-professional descriptions, found the parts in the catalog, and shipped them to me. I very easily installed them all by myself. Read more
Covers the heater assembly on French door refrigerators. Replace if the hinged cover is cracked, broken, or missing. Installs on the center mullion.
Removed broken piece, installed new piece. Read more
Fix a refrigerator that resets when the door closes with this door reed switch. Detects door open/closed states for proper operation. DIY-friendly fix.
Unplug all the plugs to the main control board and switched to the new control board. Works perfect thank you. These days you have to do stuff yourself. Everything is getting so expensive. AppliancePartsPros customer service was 100% good. Gave me the right parts thank you again and again. Read more
Covers the hinge mechanism on French door refrigerator flapper assemblies. Replace if cracked, broken, or missing to restore door appearance and function.
Spring broke on the flap of french door. Bought the spring and pin plus the cap case which I did not need. 10 minute fix and door works fine again. Super fast shipping and easy repair. Read more
Replaces broken or cracked mullion assembly on French door refrigerators. Installs between doors to separate compartments. Easy 10-minute replacement.
It took less than 10 minutes to replace the door. There is a video on YouTube also showing the replacement. I used the chat option on the Web site to get the right replacement part number. It was quick and easy too. I was impressed with the quick accurate response Read more
Ice maker only producing crushed ice or freezing up? The auger motor controls ice dispensing. DIY-friendly repair, typically under 1 hour to install.
Entire Samsung Ice Master is modular. Ordered the "ASSY CASE-FAN AUGER MOTO " part and replaced original...Removed ice basket. Removed Cover-Wire Harness by removing screw and unplugged both the modular icemaker and part mentioned above. Icemaker is removed by sliding forward and down. The "ASSY CASE-FAN AUGER MOTO" part at back of ice compartment is held in by plastic clip on bottom of compartment. No screws to remove...just lift up clip and slide forward. Replace parts in reverse order.... Read more
Seals the ice chute to prevent warm air from entering the ice maker compartment. Replace if cracked, moldy, or no longer sealing properly. Confirm fit by model.
New Chute gasket but still need bottom gasket as they appear to both need to change. Read more
Ice not dispensing or weak flow? This dispenser door assembly restores proper ice chute function. Moderate DIY repair with basic tools in 30-45 minutes.
Removed Phillips head screw from bottom side. Next I removed front electronic interface panel, carefully. The plastic clips holding it in place are designed to pop lose on the right side first.then unplug wiring from back of interface panel. Remove two Phillips head screws holding ice/water dispensing unit in place. Carefully remove dispensing unit from leaving multiple wiring plugs connected. Carefully apply pressure to the side of the ice chute door frame to remove the ice chute door/flap.... Read more
Seals refrigerator door to prevent cold air loss and maintain temperature. Replace if torn, cracked, or causing ice buildup. Verify fit with your model.
The Refrigerator Temperature Sensor Holder is essential for maintaining accurate temperature control in your Samsung refrigerator. This genuine OEM part ensures a secure fit for the temperature sensor, promoting reliable performance and consistent cooling. Designed specifically for Samsung refrigerator models, it integrates seamlessly with your appliance, making installation straightforward and hassle-free. The sturdy construction of the temperature sensor holder guarantees long-lasting durability, protecting your sensor from damage and ensuring it remains in place. By using this genuine OEM part, you can restore the precise temperature regulation of your fridge, preventing issues like improper cooling or temperature fluctuations. This not only helps in keeping your food fresh but also enhances the overall efficiency of your refrigerator. Whether youGÇÖre replacing a worn-out holder or upgrading a damaged component, the Refrigerator Temperature Sensor Holder provides the functionality and reliability you need to keep your Samsung refrigerator operating smoothly.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Replaces broken or missing spring on French door refrigerator left door flapper assembly. Ensures flapper retracts properly when door closes for tight seal.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more