Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces cracked, rusted, or broken oven door trim on your range. Includes side and bottom pieces that frame the glass panel and secure to the door frame.
I am plagiarizing some info from the techs.. 1. Turn off the electrical supply to the range. 2. Remove the oven door and position it on a protected floor or "truck tailgate".(here I googled, "removing oven door on super capacity 465" ...my model had clips at the hinge that I had to pop out)... lay down the handle and outer door glass facing up. 3. Raise the top of the door and remove the two screws that secure the top of the door trim and the handle to the door liner, then remove the handle and... Read more
Drip pan kit installs below cooktop burners to catch spills and grease. Replace chipped, stained, or worn pans to restore a clean appearance. Kit includes pans.
These drip pans fit! I had bought some from a local big box store and they didn't fit. I only wish they still made them without the holes in the bottom of the drip pan. How's that supposed to hold a boil-over? But that's the manufacturer. AppliancePartsPros have always sent me orders right on time. Read more
Decorative trim piece for range oven door side edge. Replace if cracked, broken, or missing after disassembly. Left-hand white trim installs along door.
Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site. Read more
White right-hand side trim for range oven doors. Covers gaps and protects internal components. Replacement needed when cracked, broken, or missing.
Outer door glass panel for range ovens. Installs on the front of the oven door. Replace if cracked, shattered, or damaged. White finish option available.
Simple replacement of new glass Read more
Replace your range drawer glide when the storage drawer sticks, won't stay up, or slides unevenly. Restores smooth drawer operation. Verify fit by model number.
I ordered the drawer glide but ironically when I went to fix it I found that the old one had just fallen off and was inside the cavity of the oven. However, my experience with AppliancePartsPros was AWESOME! I ordered the part on Thursday evening, wishing that I would have the part in time for the weekend project but not expecting it. I was shocked when I walked out on my porch Saturday morning at 9am to find the part delivered and ready to go! Read more
Replacement bottom door trim for range ovens. Provides finished appearance to lower edge of door. Replace if cracked, rusted, or missing for a clean look.
Removed three screws holding trim on bottom of oven door, removed rusted trim, installed new trim, reinserted the three screws. Stove looks new again! The experience with AppliancePartsPros was outstanding, representative I spoke with rechecked the part number I provided to make sure it was the correct part. The part arrived the following day, packaged to ensure it did not become damaged during shipping. Excellent experience! Read more
Trim kit frames your range oven door for a finished look. Replaces broken, cracked, or missing trim pieces damaged from regular use or heat exposure.
Kit arrived promptly. it took help of a friend and 45 minutes to install Read more
Secures panels, handles, and components on your range. Replace this screw if it's stripped, missing, or damaged during door or handle repairs.
Mounting screw secures panels, control boards, and burners inside your range. Replace if lost, stripped, or corroded to keep components stable.
Replaced the hinge receiver with a new one. The old one was bent slightly inside where it could not be seen. I think someone pushed the door down to far or fell on it. 2 screws to remove it, take out storage drawer and reach up little ways to remove and replace the receiver. Replace the 2 screws. The receiver comes with 2 screws but I ordered an extra ( never used it ). The sides of the receiver were spread just a tiny bit but were enough to cause a problem. Read more
Replacement screw that secures the handle to the oven door trim. Needed when original screw is stripped, rusted, lost, or damaged during handle replacement.
Overall the fix wasn't too hard. The challenge was putting the oven door back together and holding it together while trying to tighten the screws. Enlisted my wife's help to hold the door and at first the handle screws wouldn't tighten. My cordless screwdriver's battery was under-charged. Once I switched batteries I was able to tighten the screws. Seemed like I needed to push too hard (my wife freaked "not so hard you will strip them!") however pushing hard was what was needed. Both screws... Read more
Replace your range control knob if cracked, broken, or missing. This knob installs on the control panel to select burners and oven functions by rotation.
We had actually considered buying a new range but this one works so well that we didn't want to replace it with a new one that probably wasn't of high quality manufacture. SO-- I ordered the trim kit and a knob -knob replacement is obviously a no-brainer. -oven door trim kit took about 30 minutes but 10 minutes was spent cleaning the outer glass and inside the door. everything considered it was an INEXPENSIVE and QUICK fix to make an old, terrible looking range look practically new. Read more
Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.
Installed it according to video watched. Read more
Burner won't light or has no gas flow? This top burner valve controls gas to individual burners. Moderate DIY repair with basic tools needed.
Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were... Read more
Machine screw with 8-32 threading used to secure control panels, brackets, covers, and internal components. Replace missing, stripped, or damaged screws.
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part. Read more
Under-cooktop housing that supports surface heating elements. Replace when original box is rusted through, corroded, bent, or has holes that allow spills to drip.
I first DISCONNECTED POWER FROM THE RANGE using the breaker. I then pulled the range out from the wall to give myself plenty of working room. I lifted the range top up as when you clean under the burners. I then moved the ends of the bottom of the slide rods that lock the range top open back where they came loose from the top of the range. This allows you to fold it higher and have complete access to the top of the range. I then took out all the Phillips head screws that hold down the sheet... Read more