Whirlpool Rbd245pdb15 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10131825
The Oven Temperature Sensor is an OEM part for Whirlpool ovens. This component is responsible for monitoring the oven's internal temperature, sending data to the control board to maintain the desired cooking temperature. It ensures accurate temperature readings, which are essential for baking, roasting, and other cooking functions.
Causes of a bad Oven Temperature Sensor include prolonged exposure to high temperatures, which can degrade its responsiveness over time. Additionally, physical damage or wear and tear can lead to inaccurate temperature readings.
Symptoms of a bad Oven Temperature Sensor include:
- The oven temperature is inconsistent with the setting.
- Food is not cooking evenly or as expected.
- The oven fails to reach the set temperature, or it overshoots it significantly.
- Error codes related to temperature regulation appear on the oven's display.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Dead control panel. Oven would not start. Mike H. • Cotopaxi , CO • April 12, 2022
I have a Whirlpool RBS245PDQ12 wall mount oven. Gathering information from AppliancePartsPros.com resulted in two possibilities: The Thermal Switch or the Control Panel. Talking with Appliance Parts Pros led to testing the Oven Temperature Sensor. It's supposed to test at 1080 Ohms at 70 degrees Fahrenheit. Mine tested at 960 Ohms so I knew it was bad... I found the service manual on the top of the Oven on the left behind the control panel. It has values for testing (Ohms of resistance)...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10207397
The Oven Heating Element is an OEM replacement part for Whirlpool ovens. It is a crucial component responsible for generating the heat necessary for baking, roasting, and broiling in the oven cavity.
Causes of a bad oven heating element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.
Symptoms of a bad oven heating element:
- Oven not heating up properly or failing to reach the set temperature
- Uneven heating or hot spots within the oven cavity
- Visible damage or breaks in the heating element coil
- Unusual smells or burning odors emanating from the oven
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ovens.
This part fixes the following symptoms
-
Oven not heating evenly
-
Little to no heat when baking
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Burnt out oven coil Donald T. • Bluffton , SC • April 27, 2014
Received new part less than 24Hrs from order placement, installed and operating normally 15 min later. GREAT SERVICE!!
Read more
More
$59.95
- Compare At:
-
$70.74
- You Save:
-
$10.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760771
The Broil Element is an OEM part for Whirlpool ovens. This element is located at the top of the oven and provides the high heat necessary for broiling food.
Causes of a faulty Broil Element can vary. One indicator is visible damage like blistering, bulging, or breaks in the element. Another sign could be a lack of heat when the broil function is turned on, which might signal a burned-out element. If the element is constantly tripping the circuit breaker, it could point to an electrical issue.
Symptoms of a malfunctioning Broil Element include:
- Food not broiling or browning properly.
- The oven not reaching the set temperature or taking longer than usual to heat.
- Unusual electrical odors or sparks coming from the element area during use.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broil Heating element shorted. Noel D. • Palmdale , CA • March 28, 2014
Found a real cool Youtube video by AppliancePartsPro.com. I watched it and learned how easy it was to unhook and replace the part with proper care and precautions. It even included tips on critical steps so the wires won't slip back inside the hole and save you from hours of possible mistake. Then I ordered the part. It came the day after, then I replaced the part, meaning, I DID THE WORK! (My wife was so impressed- lol) Easy as pie... but we made and had a much nicer roast the day after....
Read more
More
$87.22
- Compare At:
-
$103.79
- You Save:
-
$16.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9759243
The Upper Oven Thermal Fuse is an OEM part compatible with Whirlpool double wall ovens. Located near the upper oven heating element, this safety device protects the upper oven cavity from excessive heat rises. If temperatures get too high, the fuse automatically cuts power to prevent overheating.
Symptoms of a blown upper oven thermal fuse include:
- The upper oven failing to heat or losing total heating function
- Burning smells emanating from the upper oven cavity
- Safety shutdown errors related to over-temperature conditions
Common causes are airflow restriction trapping heat or faulty wiring allowing overheating. Natural aging also deteriorates fuses over extended use cycles.
Compatible brands include KitchenAid, Jenn-Air and some Kenmore wall oven models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Stopped working while in self cleaning mode. Eberhard L. • Raleigh , NC • March 17, 2023
This is for the Whirlpool in-wall double oven GBD307PDS10. No power and the door locked after the shutdown before the self-cleaning cycle was over. I watched some video and this is a known issue the fuses blow during self-cleaning.
I opened the door with a 90-degree hook, an easy task. Took doors off (watch video from others), unscrewed from the wall, and made a very small platform. and took the oven out (need two people and take the doors off first. The doors are heavy and you won't lift the...
Read more
More
$49.95
- Compare At:
-
$59.44
- You Save:
-
$9.49
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.
Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.
Symptoms indicating the need for Appliance Touchup Paint include:
- Visible scratches or chips on the appliance surface
- Areas of exposed metal prone to rust
- Blemishes that affect the overall aesthetic of the appliance
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$12.55
- Compare At:
-
$15.06
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449154
The Whirlpool element mounting screw is an OEM replacement part responsible for securely fastening the heating element to the designated location inside the oven. This part ensures that the heating element remains firmly attached to the appliance's structure. The element mounting screw is crafted from durable materials to withstand high temperatures to provide a reliable and stable connection between the heating element and the oven.
This part fixes the following symptoms:
- Loose or wobbly heating element
- Uneven heating inside the oven
- Excessive vibrations or rattling noises during operation
The Whirlpool element mounting screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Our broiler coil had a blister in it and wasn't working Stephanie M. • Brentwood , TN • September 10, 2016
We ordered the part and one extra screw(which we didn't end up using). If possible take door off your oven for easy access and have lighting source to see well. Taking part out was easy. Putting back in was more difficult because you have to match up two layers of parts in our oven. The broiler coil and the broiler shield above it. We used small craft clothes pins to keep wires from going behind the built in oven. We used a small diameter screw driver to match up holes before putting...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195934
The Door Latch is an OEM replacement part for Whirlpool ranges. It is the mechanism that securely holds the range door shut during cooking operations.
Causes for a bad door latch can include wear and tear of moving parts over time exposing them to high heat, improper cleaning allowing residue to build up and corrode components, or physical damage like bending from excessive force on the door.
Symptoms of a door latch issue include:
- Inability to fully close the range door
- Sagging or loose door that does not feel secure during baking and broiling
- Door that will not safely stay shut on its own
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Said door was open even when it was close Connie S. • River , KY • August 11, 2016
Replaced the latch. Everything works fine now
Read more
More
$151.77
- Compare At:
-
$180.61
- You Save:
-
$28.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4448933
The Gasket Retainer is an OEM part for Whirlpool ovens. It secures the oven door gasket in place, ensuring a tight seal that prevents heat from escaping during cooking. This helps maintain consistent cooking temperatures and improves energy efficiency.
Causes of a bad oven gasket retainer can include wear and tear from repeated use, heat damage, or accidental impact that causes the retainer to break or become misshapen.
Symptoms of a bad oven gasket retainer include:
- The oven door gasket not staying in place
- Heat escaping from the oven, leading to uneven cooking
- Visible damage or deformation of the retainer
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Heat loss due to old worn door gasket door insulation damaged Raymond M. • Mundelein , IL • February 09, 2016
Replacing the Door Gasket is very easy and will take about 2-3 mins per door. Simply remove the Gasket Retainer (1 screw), and pull off the old Gasket. Install the new gasket by simply pushing the gasket clips into the holes where the old clips came out from. Be sure to start gasket at the first hole either side of the Gasket Retainer and work your way around. Reinstall Gasket retainer.
The Door Insulation is a very involved repair, and best to follow specific repair manual instructions. Door...
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10176670
This blower is the internal cooling fan that circulates air through the appliance to keep components at safe temperatures and maintain proper airflow. Replacing a failed or noisy blower restores ventilation and reliable operation.
- Moves air across heat-sensitive parts to prevent overheating
- Maintains proper ventilation inside the unit
- Common symptoms: fan not running, loud grinding/squealing, intermittent operation
- May cause hot control panel, over-temp errors, or unexpected shutdowns
What's included: 1 blower Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Access location varies by model; retain and transfer any brackets, seals, or fasteners from the original
- Note wire/connector orientation and airflow direction; match to the original
- After installation, verify the fan spins freely and no wiring contacts the impeller
Do-It-Yourself Stories from Customers like You
This was a double oven, the lower cooling fan was making noise Richard S. • Greensboro , GA • January 12, 2020
It was relatively easy to replace it. Some suggestions:
1. Make a platform to support the oven when you slide it out of the cabinet. Make the platform sturdy because this thing is heavy. Make the platform the same height as the cabinet so that you can just slide it out and back in without having to lift it.
2. The fan is secured with about 5 sheet metal screws plus there are 3 screws on the top that the fan slides under when you loosen them. However you can't fit a screw driver in the space to...
Read more
More
$162.52
- Compare At:
-
$193.40
- You Save:
-
$30.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4173175
120-130 volt, 15 watt.
Do-It-Yourself Stories from Customers like You
Oven light burned out and being that it was an unusual design the replacement can not be found in nearby stores Janet R. • Greenville , WI • January 15, 2016
Found Appliance Pros online and they carried the bulb I needed. I ordered on Monday and got it the next day. I bake a lot so it is really annoying when the bulb burns out. My oven actually has two of these bulbs and they are expensive.
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400832
Screw for side trim.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: W10491987
This foam seal fits between mating parts to create a tight barrier that helps prevent leaks and rattling. Replacing a worn or missing seal restores proper sealing and helps keep your appliance running quietly. What it does:
- Creates a compliant gasket between components to limit air or moisture passage
- Helps dampen vibration and reduce rattling/buzzing where parts meet
- Helps maintain proper airflow or fluid routing as designed
- Typical symptoms include leaks, condensation/frost near a joint, or new vibration noises
What's included:
Install notes:
- Disconnect power; turn off the water supply before service
- Note the original seal's routing/orientation before removal
- Clean and dry all mating surfaces; remove old foam and residue
- Install without stretching or over-compressing; ensure even contact with no gaps
Do-It-Yourself Stories from Customers like You
Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary.
IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449809
This factory replacement screw secures panels, brackets, and covers in your appliance. Replacing missing or stripped hardware restores a solid fit, reduces vibration and rattles, and keeps components properly aligned during everyday use. What it does:
- Fastens panels, trim, brackets, and internal components to the cabinet or chassis
- Helps maintain alignment and reduce vibration or rattling noises
- Replaces missing, rusted, or stripped screws discovered during service
- Matches the OEM spec for locations where this part is called out on your model's diagram
What's included: 1 screw Install notes:
- Disconnect power (and gas or water, if applicable) before servicing
- Use the appropriate driver; start threads by hand to avoid cross-threading
- Tighten snugly—do not overtighten to prevent stripping metal or plastic
- Replace hardware one screw at a time to keep parts aligned
Do-It-Yourself Stories from Customers like You
Broken outer glass on lower oven door James F. • Durham , NC • May 03, 2015
I recently shattered the outer glass on my Whirlpool oven door. (Side note for lesson learned...don't swat at a fly with a broom when its on the oven door. I didnt swing hard just a love tap but thats all it took ha ha) The toughest part of the fix was removing the broken glass as it had shattered into hundreds...no thousands of pieces. Thankfully it was taped on the inside and that held some of it together. I placed the door in our garbage can and put on a pair of gloves with a scraper to...
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 4448716
This oven rack restores a stable, level surface for cookware and slides smoothly on the cavity rails. Replace a bent, rusted, or missing rack to ensure safe support and proper positioning for baking, roasting, and broiling.
- Provides a sturdy, level platform for pans and dishes inside the oven
- Slides on side rails so you can adjust rack height as needed
- Replace if bent/warped, rusted, or if the original rack is missing
- Common symptoms include binding when sliding, tilting, or inability to sit level
What's included: 1 oven rack Installation notes:
- Disconnect power and allow the oven to cool completely before working inside
- Pull the old rack forward to the stop, lift the front to clear the stop, and remove
- Align the rear of the new rack with the guides, lower into the rails, and slide fully in
- Remove racks before running a self-clean cycle to minimize discoloration and preserve smooth sliding
Do-It-Yourself Stories from Customers like You
Missing part Matthew M. • Saint Louis , MO • November 23, 2014
Rack fit perfectly in the oven.
Read more
More
$95.66
- Compare At:
-
$113.84
- You Save:
-
$18.18