Whirlpool Sf385pegw1 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3195097
This panel forms the floor of the oven, sitting above the bake element or burner to shield it from spills and provide a smooth, stable surface. Replace a warped or damaged panel to help maintain proper heating and easier cleanup. What it does:
- Forms the oven floor above the bake element or burner
- Shields the heat source from drips and debris to help prevent scorching and odors
- Supports designed airflow and heat distribution in the cavity
- Common replacement signs: warped or dented panel, rust or chipped finish, smoke/odors from spills beneath the panel, or uneven baking results
What's included:
Install notes:
- Disconnect power (and shut off gas supply for gas ranges) before servicing; allow the oven to cool completely
- Remove oven racks; release front fasteners or clips and lift the old panel out of the rear tabs (method varies by model)
- Seat the new panel into rear tabs, align the front edge, and secure as originally installed
- Verify the panel sits flat and clear of the bake element or burner before reassembling
Do-It-Yourself Stories from Customers like You
Small pieces of aluminum foil had melted onto the floor of my oven Maureen G. • Lyndhurst , OH • May 09, 2015
I purchased a new oven floor!! It only took me 15 minutes to get the other floor out & then place the new floor into position. There were only 2 screws.
Read more
More
$97.95
- Compare At:
-
$117.54
- You Save:
-
$19.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY706189
The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain a firm hold, contributing to the overall functionality and safety of the appliance.
Over time, screws can become worn or stripped due to regular use, corrosion, or over-tightening.
Causes of a bad screw include wear and tear, exposure to moisture leading to rust, and over-tightening which can strip the threads.
Symptoms of a bad screw include:
- Loose or wobbly components
- Misalignment of parts
- Noise due to vibrating or loose parts
- Difficulty in securing or removing the screw
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drum baffle broke off James H. • Etna , OH • March 21, 2017
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W11032529
The Surface Burner Igniter is an OEM part for Whirlpool ranges and cooktops. This component is crucial for igniting the gas that fuels the surface burners, ensuring that the burners light up safely and efficiently when the control knob is turned. The igniter produces a spark that lights the gas, allowing you to cook with precision and control. The surface burner igniter wire measures approximately 43" long.
Symptoms of a failing Surface Burner Igniter include:
- The burner not lighting or taking multiple attempts to light
- Weak or no spark produced when trying to ignite the burner
- A clicking sound without ignition of the burner
- Visible damage or wear to the igniter tip
Causes of a bad surface burner igniter can include regular wear and tear from frequent use, exposure to spills and food debris that can affect its function, and electrical issues such as a short circuit or a worn-out spark module.
This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
Do-It-Yourself Stories from Customers like You
Stove top ignitors not working Daniel M. • Gilroy , CA • November 24, 2015
I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them.
This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult.
Once I got the stove top up, I threaded the igniter wires to the...
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400832
Screw for side trim.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10202217
Color: Black. For white order WPW10202216. For almond order 8522446.New mounting screws need to also be ordered WP3196164.
Do-It-Yourself Stories from Customers like You
Replaced broken oven door handle Peter R. • Baltimore , MD • January 25, 2015
Overall the fix wasn't too hard. The challenge was putting the oven door back together and holding it together while trying to tighten the screws. Enlisted my wife's help to hold the door and at first the handle screws wouldn't tighten. My cordless screwdriver's battery was under-charged. Once I switched batteries I was able to tighten the screws. Seemed like I needed to push too hard (my wife freaked "not so hard you will strip them!") however pushing hard was what was needed. Both screws...
Read more
More
$115.49
- Compare At:
-
$136.28
- You Save:
-
$20.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP179051
This 10-32 machine screw secures panels, brackets, and internal assemblies in your appliance. Replacing missing or stripped hardware restores a tight, rattle-free fit and helps keep components properly aligned.
- Provides a threaded fastener for metal-to-metal connections
- Helps maintain correct alignment of panels, brackets, and housings
- Replaces missing, rusted, or stripped screws
- Symptoms include loose or vibrating panels, gaps/misalignment, or hardware that won't tighten
What's included: 1 screw Install notes:
- Disconnect power (and shut off gas/water, if applicable) before servicing
- Match the 10-32 thread and length to the original screw for the location
- Start by hand to avoid cross-threading; tighten snugly without over-torquing
- Retain and reinstall any original clips, spacers, or washers used in your model
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$8.36
- Compare At:
-
$9.86
- You Save:
-
$1.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196175
Size: 8-18 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Oven drawer wouldn’t slide properly. Nick B. • Hanover , MD • November 09, 2020
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3195546
Oven broiler drawer glide mounts to front of the drawer. For the rear drawer glide that mounts to the body order WP8053334.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053807
This hinge is for painted door only. For stainless steel door use WP8272822.
Do-It-Yourself Stories from Customers like You
The oven door would not close completely William R. • Emporia , KS • July 27, 2016
This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up...
Read more
More
$75.63
- Compare At:
-
$90.00
- You Save:
-
$14.37
Genuine Whirlpool part
By: Whirlpool
Part Number: W11087383
This surface burner igniter creates the arc that lights gas at the cooktop/range burner. Replace a cracked or worn electrode to restore fast, reliable ignition and reduce repeated clicking when trying to light a burner.
- Generates a high-voltage spark at the surface burner to ignite gas
- Typical symptoms: no spark, intermittent/weak spark, burner lights only with a match, or constant clicking
- Mounts near the burner head; works with the spark module and switch harness
- Inspect for a cracked ceramic insulator, damaged tip, or loose lead
What's included: One surface burner igniter/electrode
- Disconnect power and shut off gas before servicing
- Handle the ceramic insulator carefully; avoid touching or contaminating the electrode tip
- Confirm proper gap and alignment to the burner head/cap after installation
- Check the spark module, switch harness, wiring connections, and burner cap/grounding
Do-It-Yourself Stories from Customers like You
The old and worn out. Rodney S. • Rockdale , TX • December 13, 2022
We replaced the Igniters, Spark Module, Door Seal, and Knobs.
Read more
More
$36.95
- Compare At:
-
$44.34
- You Save:
-
$7.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053421
This spark module generates the high-voltage pulses that ignite your gas surface burners. Replacing a failed module restores consistent clicking and lighting so burners ignite quickly and reliably.
- Supplies timed high-voltage pulses to each surface igniter when a burner knob is turned
- Coordinates ignition for four burners
- Common symptoms: no spark on any burner, only some burners sparking, continuous clicking after flame lights, or intermittent/weak spark
- Helps resolve burners that only light with a match
What's included: 1 spark module Install notes:
- Disconnect power and shut off gas before servicing
- Access location varies by model
- Label and transfer wires one at a time to the new module; ensure the ground connection is secure
- Reinstall in the original position, route wires away from heat/sharp edges, and test all burners
Do-It-Yourself Stories from Customers like You
The stove top burners did not light Jerome L. • Joliet , IL • July 04, 2015
I first called an appliance service co. and they came the next day. They discovered it was the spark module but they did not have one in stock. They would call, when it was in, for a return visit.
After a few days of waiting and lighting the burners by hand, I looked in the internet and found the AppliancePartsPros.com, and typed in my problem. They told me what I needed to do to fix it. I watched the video on replacing the part, and then ordered the part. It was here the next day.
I took the...
Read more
More
$112.95
- Compare At:
-
$136.30
- You Save:
-
$23.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196037
This front leveling leg adjusts the height at the front of your appliance to keep it level and steady. Replacing a worn or missing foot helps eliminate rocking, protect floors, and make fine leveling adjustments simple.
- Threads into the base at the front corner to raise or lower the unit for accurate leveling
- Stabilizes the appliance to minimize rocking and vibration when opening the door or using the cooktop
- Restores proper adjustment when the original foot is stripped, bent, or missing
- Common signs include a wobbling appliance, difficulty leveling, or metal-to-floor contact/scuffing
Includes: 1 front leveling leg. Install notes:
- Disconnect power; turn off the gas supply
- Protect the floor and use an assistant to carefully slide and tip the appliance
- Start the new leg by hand to avoid cross-threading; finish adjustment with a wrench
- Level front-to-back and side-to-side, then verify stability before restoring service
Do-It-Yourself Stories from Customers like You
Range drawer was loose and also the range was scratching the floor Juan M. • Highland Park , NJ • May 15, 2017
Discover that drawer glide and one of the oven front legs were broken, found the parts at ApliancePartsPros and got my range as good as new now!
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Whirlpool part
By: Whirlpool
Part Number: W11117434
The Surface Igniter is an OEM replacement part for Whirlpool ovens and ranges. It is a crucial component responsible for igniting the gas burners or the oven's baking and broiling elements. The component features an orange wire with a length of 39 inches and a female terminal at the wire end.
Symptoms of a need to replace the surface igniter include:
- Failure of the burners or oven elements to ignite or heat up
- Delayed ignition or inconsistent heating performance
- Visible damage, cracks, or discoloration of the igniter surface
Causes of a faulty surface igniter can include general wear and tear from frequent use, exposure to spills or food debris, electrical malfunctions, or physical damage from impact or mishandling.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore oven and range models.
Do-It-Yourself Stories from Customers like You
The old and worn out. Rodney S. • Rockdale , TX • December 13, 2022
We replaced the Igniters, Spark Module, Door Seal, and Knobs.
Read more
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11122877
The Surface Igniter is an OEM part for Whirlpool gas ranges. This igniter is responsible for lighting the gas burners on the stove, providing the necessary spark to ignite the gas and create a flame for cooking.
Causes of a bad igniter can include wear and tear from regular use, exposure to food spills or cleaning chemicals, or damage from high heat. A malfunctioning igniter can lead to difficulty in lighting the burners or uneven flame production.
Symptoms of a bad surface igniter include:
- Burners not lighting or taking longer to ignite
- Clicking sound without ignition
- Weak or uneven flame
- No spark visible when trying to ignite the burner
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The old and worn out. Rodney S. • Rockdale , TX • December 13, 2022
We replaced the Igniters, Spark Module, Door Seal, and Knobs.
Read more
More
$43.95
- Compare At:
-
$51.86
- You Save:
-
$7.91