Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.
I went to your web site found the part using the model number of the washer machine. Also with the part picture, there was a video showing step by step instructions. They were very clear and was breeze replacing the hose.Doing this myself saved at least probably $150-200. Appliance repair shops quoted me around $80.00 just to come out. Then they mark up the price of the hose at least twice the cost of what I paid , They too have to order the part and come back to install. So the labor was what... Read more
Replace your dryer's control knob assembly when cracked, melted, or broken. Restores selection of temperature, cycle, and power settings. Easy install.
#1. Watched a You Tube Video #2 Watched it again #3 Followed directions and replaced control knob #4 Did laundry It was very simple, so simple a retired pilot could do it. I recommend watching you tube videos for any undertaking you aren't sure of. Happy Repairing. Read more
Leveling leg assembly for front-load washers. Replaces broken, rusted, or missing legs. Adjustable threaded design stabilizes washer. Sold as 4-pack.
Installed the leg assembly and adjusted them to where the washer would not shake. Read more
Seals the door opening on front-load washers to contain water during cycles. Replace if torn, deformed, or mildewed to restore a watertight seal.
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back... Read more
Leaking water during fill cycle or pooling under your washer? This inlet hose supplies fresh water from your household line. DIY-friendly repair.
Joins two internal water lines in your washer. Replace this coupler if cracked, worn, or leaking to restore a secure connection during fill and wash cycles.
Following what I've seen or watched from you tube video clinic "how to replace drain pump for LG Washer, model wm2277hw and the help that I received from representative/ customer service of appliacepartspros, I fixed our LG Washer no problem. I am very much thankful to the representative of AppliacePartsPros who help me analyzed the problem and recommended the right parts that I needed and most importantly arrived 2 days as ordered. I would recommend AppliacePartsPros for ordering your parts. Read more
Connects water hose to washer nozzle/dispenser assembly. Replace if cracked, worn, or leaking to restore a tight, leak-resistant seal during fill cycles.
Ordered boot, nozzle, and inner spring for boot. Would have ordered outer, but the schematic for parts made it very difficult to navigate to locate parts...24 hr/next day air and I have a happy wife. The only thing that would have made it easier, was having a pair of Spring Expansion pliers, be careful not to pinch inner boot! Used Youtube video as a walk through, completed in the fraction of the time if i hadnt watched! Read more
Fix washer leaking during fill or not filling properly with a new internal inlet hose. Routes water from valve to wash system. DIY repair in 30 minutes.
Blue plastic cap for washer fabric softener dispenser. Replaces cracked, warped, or missing caps that cause drawer sticking. Clips over dispenser hole.
Replaced the water intake hoses and put new cap on softener. EZPZ ! Read more
Mounts to the washer's lower frame to secure components and maintain alignment. Replace if bracket is cracked, broken, rusted, or missing hardware.
Replaced leg mount and leg. Read more
Replacement water inlet hose for your washer. Carries supply water from the inlet valve into the tub. Replace if cracked, leaking, or worn to restore flow.
Replace your washer's outer tub assembly to fix leaks and restore quiet operation. Includes pre-installed bearings. Confirm fit with your model number.
First we called for "professional" help. Those guys took $60 of our money and said, "Get a new one, it'll be cheaper than having us fix it." Then I found this site and videos and saw that other people had the same problem I had, common for LG washers after about 7 years, when the bearings fail. If I could replace just the bearings, it would be cheap: your site had the new bearings for around $65. But I saw another user recommended getting a new rear outer tub assembly to save time and the... Read more
Replaces the front outer tub cover that houses the door boot seal and aligns the spin basket. Order a new cover if yours is cracked or worn from use.
Seals the gap between washer tub and door opening to prevent leaks. Replace if torn, cracked, or deformed to restore watertight seal. Verify fit.
Parts arrived as expected. AppliancePartsPros video's were extremely helpful. Making this repair quick and easy. I will definitely look to AppliancePartsPros for help in the future. Read more
Secures rubber hoses to fittings with constant spring tension to prevent leaks. Replace when rusted or weakened to maintain a tight seal. Confirm fit.
Fix excessive washer vibration and loud spinning with a new balance weight. Stabilizes the tub during spin cycles. Moderate DIY repair for most models.