Zoneline Heater Parts

Best Seller

Genuine Whirlpool part

Element, Broil

By: Whirlpool

Part Number: WPY04000048

The Broil Element is an OEM part for Whirlpool ranges. This part provides the intense, direct heat necessary for broiling. This part is located at the top of the oven cavity and is essential for achieving high temperatures needed for tasks like browning and searing.

Causes of a bad broil element can include electrical issues such as short circuits, damage from spills or food debris, and general wear and tear from repeated use.

Symptoms of a bad Broil Element include:

The oven not reaching broil temperatures
Inconsistent or uneven broiling
The element not glowing red when in use
Visible signs of damage or burning on the element

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Element will not heat

Do-It-Yourself Stories from Customers like You Broil element was burned out Aybars G. • Ridgewood , NJ • June 17, 2019

Turned off breaker to oven, took pictures of existing broil, supporting bracket and shield attached to oven, removed screws holding element, support piece and shield, removed bracket and shield, pulled out the element, took another close-up picture of the wires connected to element, removed wires, connected new element, turned breaker on to see if connection is correct, turned it off, installed element, shield and support bracket (in this order). Turned breaker on. Hardest part was loosening... Read more

$98.54

Compare At:: $117.26
You Save:: $18.72

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Defrost Heater With Thermostat (Refrigerator)

4.9 (33)

By: Ge

Part Number: WR51X443

This defrost heater and thermostat assembly melts frost from the evaporator and shuts off at the proper temperature during the defrost cycle, restoring airflow and helping the refrigerator maintain steady, reliable cooling performance.

Heats the evaporator to clear frost/ice during the automatic defrost cycle
Thermostat opens to terminate heat once a safe temperature is reached
Helps restore air circulation to the fresh food section
Common failure signs: heavy frost on the freezer back wall/evaporator, poor cooling or warm fridge, fan noise from ice contact, little or no water in the drain pan after "defrosts"

What's included: 1 pre-assembled defrost heater with defrost thermostat Install notes:

Disconnect power before service; work on a fully de-energized appliance
Access is typically behind the freezer's rear panel; remove shelves/ice components as needed
Fully defrost before installing the new assembly to prevent damage and ensure proper fit
Reinstall in the original locations; clamp the thermostat to the evaporator tubing and route wiring exactly as factory, away from sharp edges and moving parts

Do-It-Yourself Stories from Customers like You Defrost heater not working Jayesh P. • La Canada , CA • June 12, 2014

I replaced defrost heater with thermostat. It is a very easy and there is YouTube tutorial video for that. Read more

$117.95

Compare At:: $145.61
You Save:: $27.66

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Defrost Heater Kit

4.8 (11)

By: Frigidaire

Part Number: 5303918208

The Defrost Heater Kit is an OEM part for Frigidaire refrigerators. This part is responsible for melting frost and ice buildup on the evaporator coils during the defrost cycle.

Causes of a bad defrost heater can include regular wear and tear, electrical issues, or physical damage.

Symptoms of a bad defrost heater include:

Excessive frost or ice buildup in the freezer
The refrigerator or freezer not cooling properly
The defrost cycle not initiating
Water leaking inside the refrigerator due to melting ice

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You This was for a friend of mine his refrigerator stopped cooling Gary G. • Ofallon , MO • July 12, 2015

This was a 2000 model so rather than just replace the defrost timer which was visibly burnt on the terminals, we just did everything. The cold control, defrost timer, thermostat, defrost heater and the compressor capacitor were all replaced. I had the same issue on my older unit and tore it apart replacing one item at a time over a three month period so on an older one i suggest do it all while it is apart. Read more

$80.29

Compare At:: $96.35
You Save:: $16.06

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Surface Element, 8"

4.9 (32)

By: Ge

Part Number: WB30X354

2450w, low rise, attached ring

Do-It-Yourself Stories from Customers like You Baking element broke broiler never worked since I moved in 13 years ago and the four burners on the stove top were slowly dying Marybeth K. • Milltown , NJ • November 13, 2017

With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more

$71.95

Compare At:: $86.99
You Save:: $15.04

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hidden Bake Element Assembly (Lower)

5.0 (1)

By: Ge

Part Number: WB44X45499

Restore even, reliable bottom heat with this hidden bake element assembly. Located beneath the oven floor, it delivers the heat needed for consistent preheating and baking when the original element is burned out or damaged.

Supplies primary bottom heat during Bake cycles for electric ovens
Helps achieve normal preheat times and maintain set temperature
Replaces an element that is open/shorted or visibly blistered/broken
Symptoms can include no heat in Bake, very long preheat, or uneven baking results

What's included: Hidden bake element assembly. Installation notes:

Disconnect power at the breaker before servicing
Remove oven racks and oven floor panel to access the hidden element
Note wire positions; transfer and reconnect leads one at a time to the new element
Inspect wiring and high-heat insulation; repair/replace any damaged connectors before reassembly

Do-It-Yourself Stories from Customers like You Oven slow to heat Rictor G. • Peoria , AZ • February 23, 2015

I called GE and they sent a tech out. $89 service call. Had I REALLY inspected the oven the hidden element had blown and separated and part of it welded itself to the inside of it's compartment. GE wanted another $350 to come back and fix it. I bought the part here for around $55 and had it running again in about an hour! Read more

$48.95

Compare At:: $57.76
You Save:: $8.81

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Bake Element (Lower Heating Element)

4.9 (10)

By: Whirlpool

Part Number: WP661416

The bake element is the oven's primary lower heat source. Replacing a failed element restores proper preheating and even baking performance when the oven won't heat or struggles to maintain temperature during the bake cycle. What it does

Provides the main heat for the bake cycle in electric ovens
Common failure symptoms: no heat on bake, very slow preheat, or uneven baking
Visible damage such as blistering, cracks, or burn spots on the element indicates replacement is needed
Helps the oven reach and hold set temperature when functioning correctly

What's included

1 bake element

Install notes

Disconnect power at the breaker before servicing to prevent electrical shock
Remove oven racks; access the element mounting screws from inside the oven cavity
Carefully pull the element forward, support the wires, and transfer the connectors one at a time to avoid losing them behind the liner
Ensure terminals are fully seated; do not overtighten mounting screws, then restore power and test bake

This part fixes the following symptoms

Little to no heat when baking

Do-It-Yourself Stories from Customers like You Oven would only heat to 200 250 then the f3 lit up on front panel Marca A. • Hernando , FL • November 14, 2014

Purchased bake and broil elements as well as temp sensor. Oven is 18 years old...wasn't sure which was not functioning properly. Carefully Removed all three components, and then installed new. Oven heats perfectly. Saved buying new wall oven. Installation was very easy. I am a homemaker and mom. We can do all kinds of fix its. These folks are outstanding! !!! Items arrived very fast and packaged well. Read more

$84.95

Compare At:: $100.24
You Save:: $15.29

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Complete Heating Element Assembly

4.6 (7)

By: Whirlpool

Part Number: WPW10222771

Includes: Heating element, Heater box, High limit thermostat and Thermal fuse.

This part fixes the following symptoms

Too hot
tripping breaker

Do-It-Yourself Stories from Customers like You Dryer wasn't heating Andrew W. • Hagerstown , MD • January 21, 2017

I found the assembly with heater element, thermostat, and the thermal fuse already assembled (cheaper than finding what part was bad and ordering that one part). unplugged dryer, pulled it out and removed the dryer exhaust tube, the top and front. The harness was a little short so I wasnt able to pull the whole heater assembly out before disconnecting. BEFORE disconnecting I took a picture so that if my brain forgot what wires went were!!!! put the dryer back together and put a load that just... Read more

$134.41

Compare At:: $161.29
You Save:: $26.88

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Surface Coil Element (8-Inch)

5.0 (5)

By: Ge

Part Number: WB30K10018

Restore reliable heat on your coil-top range with this 8-inch surface coil element assembly. It replaces a burned-out or damaged large burner so pots and pans heat evenly and respond predictably.

Provides the electric heating surface for the 8-inch burner position
Common fix for a burner that won't heat or heats intermittently
Replaces a coil that is broken, blistered, or visibly burned
Resolve uneven heating or hot spots on the element

What's included: One 8-inch surface coil element assembly. Install notes:

Disconnect power and let the appliance cool completely before servicing.
Access and procedure vary by model; your product documentation.
Handle the element carefully; avoid bending the coil or terminals.
Inspect the burner receptacle and wiring for heat damage; replace if worn or loose.

Do-It-Yourself Stories from Customers like You It smell really bad then i noticed that the terminal block was burning and it cause the surface unit asm bad Chushan H. • West Valley City , UT • October 21, 2014

I took the old Terminal block out and put the new one back in. it's about 15 minutes job. it was a really simple thing to do. I don't know why it always get the Terminal Block burn in every 3 or 4 months. I have to replace it all the times. I am very disappoint about the Electric Stove. The brand I have, is Hotpoint. I think about changing to Gas Stove instead soon. Read more

$83.40

Compare At:: $99.25
You Save:: $15.85

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Radiant Surface Element (Dual)

5.0 (6)

By: Whirlpool

Part Number: WPW10275049

This dual radiant surface element restores even, responsive heat to a smooth-top range or cooktop. It replaces a failed burner so the inner and outer rings heat correctly for dependable everyday cooking.

Provides heat to a dual-size cooking zone beneath the glass surface
Works with the surface control to use the inner ring alone or both inner and outer rings
Common symptoms: burner won't heat, only one ring heats, slow or uneven heating, visible scorching or damage on the element
Helps restore consistent temperature control and full dual-ring operation

What's included: 1 dual radiant surface element Install notes:

Disconnect power at the breaker before servicing; elements carry high current
Lift or remove the cooktop to access the element
Note wire locations and transfer any mounting brackets/clips from the old element
Center the element under the burner outline and secure all connections before restoring power

Do-It-Yourself Stories from Customers like You Whirlpool glass top burner replacement James F. • Fort Lauderdale , FL • March 21, 2015

It was a simple process to enter the model number of our glass cook top stove; learn the part number required and order. It arrived in 2-days -- least expensive shipping method. The cooktop was removed with a Phillips-head screwdriver by 4 small sheet metal screws on the right and left side of the oven. The oven's power to the cooktop was easily disconnected via two "clips" and one ground. Would have cost way more with an appliance repair shop and it's an easy do-it-yourself repair. Read more

$156.95

Compare At:: $185.20
You Save:: $28.25

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Heater And Housing Assembly (Dryer)

By: Ge

Part Number: WE11M62

Replace a failed heating element with this Heater and Housing Assembly. It restores proper electric heat and airflow through the drum so loads dry evenly and within a normal cycle time. What it does:

Generates heat as air moves through the element canister
Replaces a broken, shorted, or open heater to restore drying performance
Typical symptoms: no heat, very long dry times, drum tumbles but stays cool
Often confirmed by an open (no continuity) reading on the element with a multimeter

What's included:

One heater and housing assembly

Install notes:

Disconnect power by unplugging the dryer or switching off the circuit breaker; allow the unit to cool
Access the heater housing, label wire positions, and remove mounting fasteners to swap the assembly
Transfer any reusable brackets or hardware from the old unit as required by your model
After installation, confirm good airflow and clean the vent/duct to prevent overheating and repeat failures

$221.65

Compare At:: $265.98
You Save:: $44.33

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Defrost Heater Assembly

4.0 (1)

By: Ge

Part Number: WR09X21107

This defrost heater assembly melts frost from the evaporator during the automatic defrost cycle to keep airflow clear and temperatures stable. Replacing a failed heater helps restore consistent cooling and prevents ice buildup that blocks the freezer wall. What it does:

Heats the evaporator coil to melt accumulated frost/ice during scheduled defrosts
Keeps airflow paths clear to maintain proper temperatures
Helps prevent excessive frost on the back panel or evaporator
Common symptoms of a failed heater include heavy ice buildup, weak airflow, warmer fresh-food temps, and longer run times

What's included:

1 defrost heater assembly

Install notes:

Unplug the refrigerator before servicing; wear gloves—sheet metal edges can be sharp
Access the heater behind the freezer's rear panel at the evaporator
Note wire routing and connector orientation; secure the new element as originally mounted
After installation, clear any remaining ice so airflow is restored before powering on

Do-It-Yourself Stories from Customers like You Freezer was not defrosting and the fridge was warm Thomas O. • Lenexa , KS • June 01, 2020

Heater defroster part number AP5982425. I have GE model GTE16DTHCRBB. I found a Youtube video of a repair of a similar model. Getting the heater defroster out was not a piece of cake because you can not see the mounting due to it being behind the coils, same is true for reinstalling the new. There is a strap on top of the heater defroster that has to be connected to the heater defroster before being reinstalled. It kept falling off as I tried pushing the defroster back into the mounting... Read more

$25.28

Compare At:: $29.83
You Save:: $4.55

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Broil Element 240V

4.6 (12)

By: Ge

Part Number: WB44M5

The Broil Element is an OEM part for GE ranges. This part provides the necessary heat for broiling, located at the top of the oven cavity and designed to deliver even and intense heat for broiling foods.

Causes of a bad broil element can include electrical issues such as short circuits, physical damage from impacts or heavy usage, or wear and tear over time.

Symptoms of a bad broil element include:

The broil element not heating up
Uneven or insufficient broiling results
Visible damage such as blisters or breaks in the element
The oven not reaching the desired broiling temperature

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Broiler element burnt out in my kenmore wall oven James O. • Moulton , TX • July 26, 2014

Cut off power ,inside I remove the two back screws, remove the two front screws with hangers. Pull element out, clip wires so they don't fall back in holes with clothes pins. worked good. But wire connection to the broiler was to large, had to replace connectors, wire fell in hole, had to pull wall oven out and remove back panel. I then mounted the new element to oven. Replaced connectors ,connected connectors, closed back panel, put oven in place ,connected power lines. Turned power on. Works... Read more

$75.95

Compare At:: $89.62
You Save:: $13.67

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (12)

By: Ge

Part Number: WB44X10015

This replacement part is a broil element, and it is intended for use in different types of kitchen appliances. This is a genuine replacement part made by General Electric. The broil element is typically found inside an oven or range and is part of the heating mechanisms that help cook or bake food. The broiler heats from the top, inside area of the appliance and helps with specific things like melting cheese or crisping the tops of dishes.A new broil element might be needed if the current broiler is not heating up at all, or not heating up enough. If the broil element is working properly the user should feel the heat coming from the top area of the range. It is also common to see the broil element turn bright red during use, displaying that there is heat coming off the unit. If the element is attached properly, but still unable to heat, it might be time to replace this part. Be sure that the current element is cooled down before beginning to attempt this repair. This part is sold individually and is sourced directly from the manufacturer. This element is a genuine OEM replacement part.

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Broiler heating element went out Mark H. • Water Valley , MS • March 16, 2015

I ordered a broiler element, watched the video and replaced the element when it arrived. I turned off the electrical breaker to the stove/oven. I then removed the oven door from the hinges and removed the 1/4" square head screws that secured the element in place,( the video showed phillip head screws ), removed the element wires from the old element. Replaced the element wires to the new element and reattached the element to the oven with the hex head screws. I then put the oven door back on... Read more

$78.66

Compare At:: $93.61
You Save:: $14.95

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Broil Element

4.9 (7)

By: Whirlpool

Part Number: WPW10310260

This broil element is the oven's upper heating element. It delivers intense top heat for broiling and finishing, restoring proper broiler performance when the original element is open, warped, or visibly damaged.

Provides upper radiant heat during broil and top-browning cycles
Typical symptoms: broiler won't heat or glow; food won't brown on top; uneven broiling
Replace if the element is cracked, blistered, pitted, or broken
Restores consistent top heat and broiler function

Includes 1 broil element.

Disconnect power at the breaker before servicing; allow the oven to cool
Remove oven racks; take out mounting screws and gently pull the element forward
Transfer the two wire leads one at a time; support wires so they don't slip back into the cavity; ensure snug connections
Reinstall hardware, restore power, and test the broil cycle

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Control display was not working James T. • Calhoun , GA • February 17, 2015

Ordered a new one. Read more

$104.24

Compare At:: $125.09
You Save:: $20.85

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Surface Coil Element (6-Inch)

5.0 (5)

By: Ge

Part Number: WB30X254

Restore reliable heat on your range's small burner with this 6-inch surface coil element. Replacing a worn or burned-out coil brings back consistent temperature response and dependable everyday cooking performance.

Supplies direct electric heat to a 6-inch cooktop burner
Replaces a coil that is warped, cracked, or has an open/burned-out section
Common symptoms include: burner won't heat, heats unevenly, or works intermittently
Visible damage, hot spots, or arcing at the terminals can indicate failure

What's included: One 6-inch surface coil element Install notes:

Disconnect power by unplugging the range or switching off the circuit breaker
Lift the old coil and pull straight out from the receptacle to remove
Inspect the element receptacle/terminal block for discoloration or pitting; replace if damaged
Align terminals and support, insert fully, and ensure the element sits level in the drip bowl

Do-It-Yourself Stories from Customers like You Needed new heating coils Judith C. • Stanhope , NJ • February 22, 2016

Ordered new heating coils for stove Read more

$56.22

Compare At:: $66.90
You Save:: $10.68

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Broil Element (Upper)

4.9 (16)

By: Whirlpool

Part Number: WPW10583047

This ceiling-mounted broil element delivers the intense, top-down radiant heat your oven needs for broiling and finishing. Replacing a failed element restores strong, even broiler performance and consistent browning. What it does:

Provides high-temperature, top-down heat for broiling, searing, and finishing foods
Common symptoms of failure: broiler won't heat, uneven broiling, or element does not glow
Visible cracks, blistering, or breaks on the element indicate it's burned out
Restores normal broil operation when the original element is open/failed

What's included:

1 broil element

Install notes:

Disconnect power at the breaker and allow the oven to cool completely
Remove mounting screws, gently pull the element forward, and disconnect the two wire terminals; support wires so they don't slip back into the cavity
Reconnect terminals firmly, secure the element, and ensure it's clear of oven walls
Test the broil function before returning the appliance to service

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You The self cleaning feature of my ge double oven hasn't worked in years and recently the upper oven baking element stopped working Robert A. • Enfield , CT • October 19, 2015

I wanted to get the upper oven baking element replaced; it hasn't been working for a few months. This double oven has had two other issues, there is a fan that comes on to cool the electronics panel, That fan has made excessive noise and it operates for 2-3 hours after the oven turns off. The other problem with the oven is the Self-Cleaning feature runs for about 15-30 minutes and then turns off with an error code. I've had a local appliance repair person in to address the error code and... Read more

$81.61

Compare At:: $97.12
You Save:: $15.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Zoneline Heater Parts

Element, Broil

Defrost Heater With Thermostat (Refrigerator)

Defrost Heater Kit

Surface Element, 8"

Hidden Bake Element Assembly (Lower)

Bake Element (Lower Heating Element)

Complete Heating Element Assembly

Surface Coil Element (8-Inch)

Radiant Surface Element (Dual)

Heater And Housing Assembly (Dryer)

Defrost Heater Assembly

Broil Element 240V

Oven Broil Element

Oven Broil Element

Surface Coil Element (6-Inch)

Oven Broil Element (Upper)

Appliance Type

Brands