Inlet Valve Parts

This is the hot water inlet valve for compatible laundry appliances. It controls the flow of hot water into the machine during fill cycles, helping ensure proper washing performance and accurate temperature mixing.

• Opens and closes to allow hot water into the tub when energized
• A failed valve can cause no hot fill, slow filling, incorrect water temperature, or leaks from the valve body
• Also lead to error codes related to water fill or extended fill times

• Disconnect power and turn off both water supplies before servicing
• Have a towel/contained pan ready for residual water in hoses
• Note hose orientation and electrical connector position before removal
• Inspect and replace inlet screen washers or hoses if restricted or worn

"Y" Tube is being replaced. The old valve has a double water outlet, must change to this single outlet and eliminate the "Y" Tube.

Electronic water inlet valve that controls the appliance's water flow during fill cycles, restoring proper filling and helping prevent overfills, persistent fill errors, or water leaks when the original valve fails. What it does:

• Opens and closes to route water into the appliance when signaled by the control board.
• Responds to electronic fill commands; a failed valve can cause no-fill, continuous fill, or error-code symptoms.
• Can allow water leaks if seals or valve body fail.
• Works as the unit that meters fill volume for cycles that require water.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect inlet hoses and seals when installing; replace damaged hoses or gaskets to prevent leaks.
• Test the appliance through a short fill cycle after installation and check for leaks.

Fits most Kitchen Aid dishwashers. Replaces old 2 coil valves.

This water inlet valve controls water flow to the refrigerator's ice maker and dispenser so your appliance makes ice and dispenses water reliably. Replaces a failed valve to restore normal water delivery and prevent leaks. What it does:

• Opens and closes to route household water to the ice maker and dispenser when signaled.
• Stops water flow when the fill cycle ends to prevent overfilling.
• Commonly replaces valves causing no water to the dispenser or ice maker.
• Also used when valve leaks or runs continuously.

• Turn off the refrigerator and shut off the water supply before starting work.
• Disconnect electrical connectors and water lines carefully; expect minor residual water.
• Inspect hose fittings and seals; test for leaks after installation.

The Dishwasher Water Inlet Valve Assembly is essential for regulating the water flow into your dishwasher, ensuring optimal cleaning performance. This genuine OEM part is engineered to provide precise water control, preventing leaks and maintaining efficient operation. Specifically designed for Samsung dishwashers, it guarantees a perfect fit and seamless integration with your appliance. The Dishwasher Water Inlet Valve Assembly manages the accurate amount of water needed for each wash cycle, enhancing the dishwasherGÇÖs effectiveness and prolonging its lifespan. Constructed from high-quality materials, this valve assembly is durable and reliable, reducing the need for frequent replacements. Installing this genuine OEM part is straightforward, making it an ideal choice for DIY repairs and helping you save on service costs. Whether your dishwasher is experiencing issues with water intake or inconsistent cleaning results, the Dishwasher Water Inlet Valve Assembly provides a dependable solution to restore your applianceGÇÖs functionality and ensure it operates smoothly for years to come.

This cold water inlet valve is the solenoid-operated valve that opens to let cold water into your washer during fill and closes to stop flow. Replacing it restores proper fill speed and helps prevent off-cycle drips.

• Regulates cold-side water flow into the washer during fill and rinse cycles
• Opens when energized by the control; closes to stop water between cycles
• Common signs of failure: no cold fill, slow fill, or dripping into the tub
• May trigger fill/temperature errors or cause a loud hum with little/no water flow

• Disconnect power and shut off the household water supply before servicing
• Place a towel or pan to catch residual water and relieve line pressure
• Label and transfer hoses and wire connectors one-for-one to the new valve
• Inspect/clean inlet screens and flush lines; check for leaks after a test fill

This water valve kit controls the flow of water from your home supply to the refrigerator's icemaker and/or dispenser. Replacing a sticking or leaking valve helps restore proper fills and dispensing performance. What it does:

• Opens and closes to supply water during icemaker cycles or when the dispenser is activated
• Can improve slow or intermittent fills
• Addresses leaks originating at the valve body or its connections
• Symptom-based clue: audible buzzing from the valve with little/no water flow

• One water valve kit

• Disconnect power and shut off the household water supply before servicing
• Place a towel to catch residual water and relieve line pressure
• Note wire and tube locations; cut plastic tubing square and fully seat into push-in fittings
• Restore water and power, then check all connections for leaks and run a test fill

The Water Inlet is an OEM component specifically designed for Bosch refrigerators featuring internal water filtration and dispensing systems. It serves as the entry point for unpurified water into the appliance.

The water inlet utilizes precise engineering to thread securely onto liquid supply lines. Its feed line transport capacity is rated to withstand regular high-pressure pulses from large filtered volumes. 

Causes for inlet replacement typically relate to normal wear at the threaded fitting connection over time. Loosening can affect water tightness and risk leak development.

Symptoms of a failing water inlet include:

• Water leakage around the inlet fitting 
• Loose inlet face or threads requiring tightening
• Diminished water flow rates into the refrigerator 

 This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore refrigerator models utilizing matching water system architectures. Reinstallation restores a tight seal and reliable supply transport functionality.
 

This replacement water inlet valve controls the flow of water to the refrigerator's dispenser and ice maker, restoring reliable water delivery and ice production. Designed to match OEM fit and function. What it does:

• Opens and closes to route water to the dispenser and ice maker when commanded
• Helps stop water flow when the dispenser is inactive to prevent leaks
• Commonly replaces failed valves that cause no water, weak dispensing, or continuous running
• Works as a direct-fit valve for compatible LG refrigerator units

• Disconnect power and shut off the water supply before starting work
• Handle connectors and tubing carefully; confirm tight, leak-free connections when reassembling
• Inspect and replace damaged inlet tubing or fittings as needed to prevent leaks

This single-solenoid water inlet valve controls the flow of water from your home supply into the refrigerator's water system, typically feeding the ice maker. A failing valve can stop fill, cause slow or inconsistent fills, or allow unwanted seepage.

• Opens and closes when energized to regulate water to the appliance's water circuit
• Common symptoms: no ice production, small or hollow cubes, water seeping into the ice maker, or leaks at the valve
• Electrical failure (open coil) or mineral debris can keep the valve from opening or closing properly
• Restores proper water fill and reliable shutoff when replaced

• Unplug the refrigerator and shut off the water supply before servicing
• Relieve line pressure and place a towel or pan to catch residual water
• Label or photograph tubing and wires for correct reassembly; cut plastic tubing square and fully seat it
• Restore water and power, then check all connections for leaks

Comes with two filters.

The Impeller Jug is an OEM part for Bosch dishwashers. Located inside the wash chamber, the impeller jug is responsible for evenly distributing water throughout the dish rack during the wash cycle. It features strategically placed holes and channels that work with the spray arms to direct water flow and ensure all dishes receive thorough coverage. 

Symptoms of a bad impeller jug include:

• Incomplete cleaning even on short or heavy wash cycles  
• Dirty dishes remaining at the end of the cycle
• A buildup of food or grime deposits inside the wash chamber
• Off-balanced or excessive noise levels during washing

Causes of failure can be mineral or scale buildup inhibiting water flow, cracked or damaged casing allowing leaks, or worn impeller fins no longer efficiently dispersing water. Over time, hard water deposits and normal use can degrade performance. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. 

This drain valve controls the flow of water out of the appliance to remove standing water and prevent overflow. Replacing a faulty valve restores normal draining and helps stop pooling or persistent drain error symptoms. What it does:

• Opens and closes to release water from the appliance drain path.
• Works with the pump/drain line to move water out during cycles.
• Common issues indicating failure: appliance won't drain, water pooling, or intermittent drain errors.
• Fits as the direct replacement component for the OEM valve in affected models.

• Disconnect power and turn off the water supply before starting work.
• Expect residual water in hoses; have towels and a pan ready to catch spills.
• Remove and replace using basic hand tools; keep clamps and seals secure to avoid leaks.

This water inlet valve assembly controls and regulates the flow of water into your washer during fill. A working valve helps the washer start and complete cycles reliably without leaks, overfilling, or long fill times.

• Opens and closes to allow household water to enter when the control calls for a wash or rinse
• Shuts off water flow when not energized to prevent unwanted filling
• Helps maintain proper water levels and flow for consistent performance
• Common symptoms: no fill or slow fill, continuous filling or overflow, leaks at the valve or hose connections, or buzzing with little/no water flow

• Unplug the appliance and shut off water supplies before servicing
• Place towels or a pan to catch residual water and relieve line pressure
• Label or photograph connectors/hoses; transfer them one at a time to the new valve
• Tighten hose fittings snugly and run a test fill to check for leaks

Dual water inlet valve that controls water supply to the refrigerator dispenser and icemaker, restoring proper water and ice delivery and helping stop leaks or erratic flow caused by a failed valve. What it does:

• Routes and controls water flow to the dispenser and icemaker; a defective valve can cause no water dispensing or no ice production.
• Uses two independent solenoids to send water where needed; failure or blockage can cause weak, intermittent, or continuous flow.
• Seals and meters incoming water from the supply line; worn valve seals can lead to leaks or flooding.
• Replaces the factory inlet valve assembly to restore normal water operation when the original valve fails.

• Shut off refrigerator power and the household water supply before starting the repair.
• Relieve water line pressure and disconnect lines carefully to avoid spills; keep a towel and bucket handy.
• Ensure electrical connectors are fully seated and water fittings are snug—do not overtighten plastic fittings.
• After installation, restore water and power, then check all connections for leaks and proper dispenser/icemaker operation.