Power Snowblower Traction Control Cable Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8194001
The Door Balance Link Kit is an OEM replacement part for Whirlpool dishwashers. This kit includes the necessary components to ensure proper balancing and operation of the dishwasher door.
Causes of needing to replace the door balance link kit include wear and tear over time, damage due to mishandling or impact, or issues with the door hinges or springs.
Symptoms that may indicate the need for a new door balance link kit include:
- The dishwasher door feeling loose or unstable
- Difficulty in opening or closing the door smoothly
- The door failing to stay in the desired position when opened
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.
This part fixes the following symptoms
-
Noisy
-
Door won't close
-
Door latch failure
See more...
Do-It-Yourself Stories from Customers like You
The door would free fall to the floor left door balance broken Daniel M. • San Diego , CA • December 23, 2016
I finally decided to repair my dishwasher because the door would free fall to the floor possibly breaking the hinges. Also the top shelf was rolling out on its own every time the door was opened. I first pulled the dishwasher out of the enclosure and found that the drain hose was directly under the pump area throwing the unit completely out of level. Also the inadequate plastic and rope counterbalance on the left side was completely broken where the rope was attached to the plastic piece to the...
Read more
More
$27.95
- Compare At:
-
$33.26
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10503278
The Electronic Control Board is an OEM replacement part for Whirlpool refrigerators. This Electronic (JAZZ) Control Board manages various functions of your refrigerator, ensuring proper temperature control and operation. After installation, the board will need to be programmed. An instruction sheet is included.
Causes of a bad Electronic Control Board can include electrical surges, which can damage components on the board, age-related wear and tear affecting its functionality, and exposure to moisture or extreme temperature fluctuations. These factors can lead to a malfunctioning fridge with erratic behaviors.
Symptoms of a bad Electronic Control Board include:
- The refrigerator not cooling properly
- Irregular defrost cycles leading to frost buildup or thawing issues
- Unresponsive controls or display issues
- The ice maker or water dispenser not working as expected
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Fridge runs too long
-
Freezer not defrosting
-
Freezer too cold
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Amana bottom freezer refrigerator has cold freezer warm refrigerator Albert I. • Rio Rancho , NM • June 23, 2014
A bit of research on the internet indicated the most likely problem was with the defrost system. I found the service manual for the refrigerator and was able to determine that the defrost heater and thermostat passed the self test. The refrigerator would perform a forced defrost which resulted in a cold refrigerator. More research revealed that this particular refrigerator does not have a defrost timer, instead the defrost cycle is controlled via the Electronic Control board which is also...
Read more
More
$153.95
- Compare At:
-
$183.20
- You Save:
-
$29.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198202
The Cold Control is an OEM part for Whirlpool refrigerators, acting as a thermostat that regulates the temperature inside the fridge and freezer compartments. It's a critical component that ensures your refrigerator maintains the desired temperature to keep your food fresh and safe.
Causes of a bad Cold Control may include electrical malfunctions within the control unit, which can prevent accurate temperature sensing. Wear and tear from continuous use may lead to a degradation of the control's responsiveness.
Symptoms of a bad Cold Control include:
- The refrigerator or freezer is too warm or too cold
- Frequent or continuous running of the refrigerator's compressor
- Inability to start the cooling system
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Fridge too cold
-
Fridge runs too long
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
The whirlpool side by side needed upgrade of control components William M. • Sunnyside , WA • February 06, 2017
The 20 year old unit still serves us well, looks good and has been kept in good repair. The condenser fan had stopped so I removed, cleaned and oiled that motor. The decision was made to make an upgrade to the evaporator motor and control units so that the appliance could reasonably be expected to have extended service life. The Ice maker module had been replaced 7 years ago. I ordered the parts and have made the upgrade for temperature controller and the defrost control. If you are in a...
Read more
More
$62.50
- Compare At:
-
$83.40
- You Save:
-
$20.90
Genuine Lg part
By: Lg
Part Number: 6931EL3002M
The Dryer Blower Thermostat is an OEM replacement part for LG dryers. It plays a role in regulating the operation of the blower motor, which is responsible for circulating hot air throughout the dryer during the drying cycle.
Causes of a bad dryer blower thermostat can include electrical malfunctions, physical damage, or simply wear and tear over time.
Symptoms of a bad dryer blower thermostat include:
- The dryer not heating up properly or taking longer to dry clothes
- The blower motor failing to turn on or running continuously
- Inconsistent or inadequate airflow during the drying cycle
- Error codes or fault indicators related to the thermostat or blower motor
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg dryer no heat Jeffrey J. • Emerald Isle , NC • June 06, 2016
Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same...
Read more
More
$38.95
- Compare At:
-
$46.74
- You Save:
-
$7.79
Genuine Lg part
By: Lg
Part Number: 6500EL3001A
The Dryer Moisture Sensor Bar is an OEM part for LG dryers. It plays a critical role in detecting the moisture level of clothes during the drying cycle, enabling the dryer to adjust the drying time automatically. This ensures efficient operation, preventing over-drying, which can damage fabrics and increase energy consumption.
Symptoms of a bad Dryer Moisture Sensor Bar include:
- Clothes remaining damp after a complete drying cycle
- The dryer continually running without stopping
- Inconsistent drying results, with some clothes over-dried and others still wet
Causes of a bad moisture sensor bar can stem from a buildup of lint and fabric softener residue, which insulates the sensor and impairs its ability to accurately detect moisture. Additionally, wear and tear or damage from loading and unloading can affect its functionality.
Regular cleaning and maintenance are recommended to ensure that your LG dryer operates efficiently and preserves the life of your clothes.
Do-It-Yourself Stories from Customers like You
It wouldn't heat James C. • Mooresville , NC • June 29, 2019
After I cleaned out the typical 1.5 pounds of lint from the vent, ( I do it every 2 months), I went searching for a solution. I found 6 possible causes on this site and purchased everything except a new burner; I wasn't going to go that far. Let the fun begin. Since my vacuum was still nearby, I thought I was ready for anything. Wrong. After I watched all the videos again for reassurance, I went in with screwdriver in hand and laptop nearby. I removed the top and looked inside. Don't be fooled,...
Read more
More
$20.62
- Compare At:
-
$24.54
- You Save:
-
$3.92
Genuine Ge part
By: Ge
Part Number: WB27X45466
The Control Oven TO9 is an OEM part for GE ranges. This part manages the oven's various functions, including temperature regulation, cooking modes, and timer settings. It serves as the central interface for the user to control the oven's operations, ensuring precise and reliable cooking performance.
Causes of a bad control module can include electrical surges, general wear and tear, or physical damage from impacts or spills.
Symptoms of a bad control oven module include:
- Unresponsive or malfunctioning buttons and dials
- Incorrect temperature readings or inconsistent heating
- Display not functioning properly
- Oven not turning on or shutting off unexpectedly
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven control board failed to work after oven light shorted Glenn S. • Fairfax , VA • October 28, 2014
Replaced control board myself. Easy.
Read more
More
$133.21
- Compare At:
-
$158.52
- You Save:
-
$25.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 215846602
The Defrost Timer is an OEM part for Frigidaire refrigerators. It is an essential electronic component that controls the automated defrost cycle of the refrigerator. The defrost timer monitors run times and temperatures to determine when to initiate the defrost process. It allows the refrigerator to operate efficiently by preventing excessive ice buildup. This defrost timer is designed to run for 30 minutes every 8 hours.
Symptoms of a bad defrost timer include:
- Inability to initiate or maintain the defrost cycle
- Excessive ice buildup in the freezer compartment
- Erratic temperature fluctuations
- The refrigerator running excessively or displaying other performance issues
Causes of a bad defrost timer can be normal wear and tear over time. Environmental factors like power surges or fluctuations may also impact the electronic timer functionality.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Frost buildup
-
Fridge runs too long
-
Freezer too cold
-
Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You
Not cooling properly eventually evaporator fan failure Richard D. • Wood Ridge , NJ • April 25, 2016
My problem first showed up as varying temperature in both sections of my old mid 1970’s Frigidaire model FPCI-170T-7 refrigerator, which is not listed on most appliance repair databases.
Running on the warm side from time to time, as well as sudden fan noise (probably the fan blade hitting ice build-up on the evaporator coil) alerted me to a possible defrost system problem, since the compressor was cooling. The evaporator fan eventually failed after a day or so, and a major repair was...
Read more
More
$37.95
- Compare At:
-
$45.54
- You Save:
-
$7.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9706648
Includes black knob
The Speed Control Assembly is an OEM part for Whirlpool mixers, integral to managing the mixing speed to accommodate various ingredients and recipes efficiently. This assembly is crucial for the precise control over the mixer's speed, ensuring that your mixing tasks are performed with the desired consistency and texture. Speed Control Assembly has been updated by Whirlpool and no longer includes the ribbon attached.
Common causes of a faulty Speed Control Assembly can vary, such as electrical problems resulting in erratic mixer speeds, wear and tear from regular usage, physical damage to the control assembly, or faulty wiring and connections within the mixer.
Symptoms of a bad Speed Control Assembly include:
- The mixer operates at one speed regardless of the setting
- Inability to adjust the mixer's speed
- The mixer fails to start or exhibits intermittent stopping during use
- Unusual noises or behavior when changing speeds
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The control assembly on my kitchenaid mixer became intermittent J H T. • Liberty , TX • March 17, 2014
The fix was very easy. Control assembly is easy to access by removing 5 phillips screws. Unplug the wiring from the old assembly being careful to note which wire goes to which connector. Install the new assembly and connect the wiring.
Read more
More
$82.64
- Compare At:
-
$99.17
- You Save:
-
$16.53
Genuine Whirlpool part
By: Whirlpool
Part Number: 279769
The Thermal Cut-Off Kit is an OEM part for Whirlpool dryers. This safety kit is designed to protect the dryer from overheating by interrupting the heat source when the dryer air temperature reaches dangerously high levels. The kit typically includes one high-limit thermostat and one thermal cut-off fuse. These components are critical for preventing potential fire hazards by ensuring that the dryer operates within safe temperature ranges.
Symptoms of a failing thermal cut-off kit include:
- Dryer not heating up at all, as the thermal fuse may have been triggered
- Excessive heat in the dryer, prior to the fuse being triggered
- Frequent stopping of the dryer during cycles
Causes of thermal cut-off failure often involve restricted airflow (from lint buildup or obstructed vents), component failure within the heating system, or issues with the dryer cycling thermostat that cause abnormal heating.
This OEM part is also compatible with Kenmore, Maytag, KitchenAid, Roper, and other brands manufactured by Whirlpool.
This part fixes the following symptoms
-
No heat or not enough heat
-
Too hot
See more...
Do-It-Yourself Stories from Customers like You
Old Whirlpool dryer model LE8650XWW0 would not heat purchase in 1993. Byron V. • Huntsville , AL • December 08, 2017
Since the dryer was 24 years old I opted to replace all the possible problem components, instead of just the bad one. The parts aren't that expensive and do to their age I figured it was worth it to avoid having to go back into the dryer in a few months. The repair was surprisingly easy and went pretty much as the video instruction AppliancePartPros provided with one exception. Because, my model was much older than that used in the video, I had a more difficult time replacing the Heating...
Read more
More
$34.95
- Compare At:
-
$41.94
- You Save:
-
$6.99
Genuine Ge part
By: Ge
Part Number: WD21X32165
The Configured Service Machine Control Board is an OEM component designed specifically for GE dishwashers. It serves as the central processor that monitors all cycle phases including wash, rinse, dry, and sanitization. Precise controls are paramount for thorough cleaning performance.
The causes of a board needing replacement can relate to water exposure compromising electrical circuits over time. Regular operational wear may also induce failures.
Symptoms of a faulty control board involve:
- Inoperable or interrupted wash cycles
- Inaccurate temperature or unclear error codes
- Component damage from electrical overloads
- Signal issues preventing desired settings
The configured service machine control board is compatible with Hotpoint, RCA, and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Dead dishwasher Arthur H. • Kingwood , TX • June 26, 2023
My GE dishwasher (GDT605PMM0ES) had started going in and out of service but if I unplugged it and plugged it back in it would work a few more times. Then one day that old trick didn't work anymore. Looked at what might be the issue on the internet and most signs pointed to the configured service machine control board or the configured Ui board. I ordered both, not really which was bad, but started with the Ui board first because the service machine control board showed it was receiving...
Read more
More
$90.95
- Compare At:
-
$108.23
- You Save:
-
$17.28
Genuine Ge part
By: Ge
Part Number: WE04X24550
The Timer is an OEM part for GE dryers. It's a component that controls the duration of the drying cycles, ensuring clothes are dried efficiently and not overexposed to heat, which can cause damage. The timer regulates the start, duration, and end of each cycle, playing a pivotal role in the operation of the dryer.
Causes of a malfunctioning timer can include wear and tear from regular use, electrical failures that impede the timer's movement, and physical damage to the timer knob or internal components.
Symptoms of a bad Timer include:
- The dryer doesn't start or complete a cycle
- Cycles run longer or shorter than programmed
- The timer knob does not advance or is stuck
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Knob broke off and the piece that rotated for the timer Kristi W. • Waxahachie , TX • August 25, 2019
Ordered a new timer and knob. The husband was able to fix in about 20 minutes and now works like new.
Read more
More
$79.95
- Compare At:
-
$95.94
- You Save:
-
$15.99
Genuine Ge part
By: Ge
Part Number: WH22X38441C
This main control board is the washer's central electronic brain, coordinating cycles, motor and valve operation, and safety checks. Replacing a failed board can restore normal starts, fills, agitation/spin, and reliable cycle completion.
- Manages cycle timing and power to the drive motor, drain pump, and water inlet valves
- Monitors inputs from the lid lock and other sensors for safe, accurate operation
- Interfaces with the user controls to run the selected wash program
- Typical failure symptoms: won't start or power up; no fill/agitate/spin/drain; stops mid-cycle; error codes or unresponsive controls
What's included: 1 main control board assembly Install notes:
- Disconnect power before servicing and handle the board with ESD protection
- Access the control at the top/rear area, transfer connectors one at a time to the same positions, and secure the board in the original mounting
- After installation, restore power and run the unit's diagnostic/service mode to verify operation; some models may require a configuration/personality step per the tech sheet
Do-It-Yourself Stories from Customers like You
Wouldn't allow "super" fill setting James L. • San Jose , CA • April 02, 2021
GE Washer m/n GTW460ASJ6WW would allow other fill levels, but when set to "super" it would never stop filling. Checked water inlet valve (by initiating a fill and unplugging the unit) to see if the inlet valve was sticking open, that was not the issue. Decided to replace the board even though it is a significant fraction of the cost of a new washer. Local appliance stores didn't have the board but APP did, and of course, they are open 24/7 while my local part stores have decided the weekend is...
Read more
More
$191.86
- Compare At:
-
$211.05
- You Save:
-
$19.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3390719
The Thermal Fuse is an OEM part for Whirlpool dryers. It is a critical safety component designed to protect the dryer from overheating by blowing and cutting off power if the temperature exceeds safe limits. This disposable, one-time fuse is essential for preventing potential fire hazards and ensuring the appliance operates within safe temperatures.
Symptoms of a bad Thermal Fuse include:
- The dryer not starting or suddenly stopping during a cycle
- No heat being produced while the dryer is running
- Unexplained cessation of all dryer functions
Causes of a bad thermal fuse can stem from restricted airflow due to lint buildup, a malfunctioning heating element that causes excessive temperatures, or other electrical issues within the dryer.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
My maytag bravos xl dryer would not dry properly it would run but with very little heat cycles were twice as long as previous to get clothes dry Mike C. • Lawrenceburg , IN • May 11, 2015
I replaced the "heating element" which was bad.........as well as the "Thermst-fix" and "Thermal Cutoff" which are located on the side of the element mounting location while I had the dyer all opened up and the element mounting tube removed.......I also replaced the Dryer Thermister which is located on the top of the blower fan.....To get to these parts, you must open the top of the dryer which has spring latches on both sides of the front corners... they need to be pressed in (use a putty...
Read more
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822278
The Whirlpool Defrost Timer is an OEM replacement part for Whirlpool refrigerators. The defrost timer regulates the automatic defrost cycle, which prevents ice buildup on the evaporator coils in the freezer compartment by sending a signal to the defrost heater to turn on and melt any ice buildup on the coils.
Causes of a bad defrost timer can include mechanical wear over time, electrical failures, or internal component damage. Prolonged usage and voltage spikes can also affect the timer's functionality.
Symptoms of a bad Defrost Timer include:
- Excessive frost buildup in the freezer compartment
- The refrigerator or freezer not maintaining the set temperatures
- Unusual noises coming from the appliance
- The appliance running continuously without cycling off
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Fridge runs too long
-
Fridge too cold
-
Frost buildup
See more...
Do-It-Yourself Stories from Customers like You
Defrost not working on upright 20 year old freezer W D D. • Spring , TX • September 19, 2014
A word of thanks to AppliancePartsPros - they delivered in one day. Ordered at 4PM CDT and received the part by noon the next day. Also, Alicia in the help department was able to locate an electrical diagram for my old freezer. This was essential for proper setup and her persistence in tracking down the diagram was top notch. Now on to my problem. One day I opened the freezer and found frost and thawing food. I attributed this to the door hitting an item in the freezer and not completely...
Read more
More
$33.95
- Compare At:
-
$40.06
- You Save:
-
$6.11
Genuine Lg part
By: Lg
Part Number: AGM73610701
The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.
Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.
Symptoms of a bad Magnetic Door Plunger include:
- The washing machine door not staying closed during cycles.
- The machine failing to start due to a door sensor not detecting closure.
- Random pausing of the machine during operation if the door unlatches.
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken tab on old magnet holder Joel E. • Granite Falls , NC • December 27, 2016
This was a super-easy repair. You have to line up the spring so that it sits on the bumps inside the magnet holder and the door, then you have to line up the tabs on the magnet holder so they will slide into the slots on the door. Then you just push it in. Repair took less than a minute.
Read more
More
$17.75
- Compare At:
-
$21.12
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP40113801
The High Limit Thermal Fuse is an OEM replacement part for Whirlpool dryers that prevents overheating. It is a one-time use use part that must be replaced if it is tripped. Its designed to respond to excessively high temperatures, safeguarding both the appliance and the home.
Causes of a bad High Limit Thermal Fuse can include blocked ventilation in the dryer or exhaust vent, overloading the dryer, or component failure within the heating system leading to overheating.
Symptoms of a bad High Limit Thermal Fuse include:
- The dryer not starting or abruptly stopping during a cycle.
- No heat being produced during cycles, leading to damp clothes.
- A blown thermal fuse detected during a continuity test.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too hot
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Dryer was running but not heating Chris B. • Milton , FL • March 20, 2016
The heating element had a break in the heater coils, so I replaced it with a new one from Appliance Parts Pros. I also replaced the thermal fusible link and thermostat switch because they were so cheap it just made sense to go ahead and do it while I was in there. I also cleaned every nook & cranny in the dryer, then cleaned out the vent piping- which was about 100% clogged. The video's of how to tear down a dryer were indispensable to this repair - along with APP's always having the right...
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97