Water Dispenser Control Lcd Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10861000
The Detergent Dispenser is an OEM part for Whirlpool dishwashers. It plays a crucial role in the dishwasher's operation by dispensing detergent and rinse aid at the precise moments during the wash cycle. This ensures dishes are thoroughly cleaned and dried without residue.
Causes of dispenser failure can range from mechanical issues such as a faulty spring or latch, blockages within the dispenser itself, or electronic problems affecting the timing and release of detergent.
Symptoms of a bad Detergent Dispenser include:
- Failure to dispense detergent properly, leading to dishes not being cleaned effectively.
- Rinse aid leakage, which can result in streaky and spotty dishes.
- The dispenser door sticking or failing to open during the wash cycle.
- Unusual noises coming from the dispenser mechanism.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Soap dispenser not functioning Gary K. • Durango , CO • October 28, 2018
The part went on easily. U Tube video answered any questions I had before installing.
Read more
More
$79.74
- Compare At:
-
$99.67
- You Save:
-
$19.93
Genuine Ge part
By: Ge
Part Number: WE04X24550
The Timer is an OEM part for GE dryers. It's a component that controls the duration of the drying cycles, ensuring clothes are dried efficiently and not overexposed to heat, which can cause damage. The timer regulates the start, duration, and end of each cycle, playing a pivotal role in the operation of the dryer.
Causes of a malfunctioning timer can include wear and tear from regular use, electrical failures that impede the timer's movement, and physical damage to the timer knob or internal components.
Symptoms of a bad Timer include:
- The dryer doesn't start or complete a cycle
- Cycles run longer or shorter than programmed
- The timer knob does not advance or is stuck
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Knob broke off and the piece that rotated for the timer Kristi W. • Waxahachie , TX • August 25, 2019
Ordered a new timer and knob. The husband was able to fix in about 20 minutes and now works like new.
Read more
More
$79.95
- Compare At:
-
$95.94
- You Save:
-
$15.99
Genuine Ge part
By: Ge
Part Number: WH22X38441C
This main control board is the washer's central electronic brain, coordinating cycles, motor and valve operation, and safety checks. Replacing a failed board can restore normal starts, fills, agitation/spin, and reliable cycle completion.
- Manages cycle timing and power to the drive motor, drain pump, and water inlet valves
- Monitors inputs from the lid lock and other sensors for safe, accurate operation
- Interfaces with the user controls to run the selected wash program
- Typical failure symptoms: won't start or power up; no fill/agitate/spin/drain; stops mid-cycle; error codes or unresponsive controls
What's included: 1 main control board assembly Install notes:
- Disconnect power before servicing and handle the board with ESD protection
- Access the control at the top/rear area, transfer connectors one at a time to the same positions, and secure the board in the original mounting
- After installation, restore power and run the unit's diagnostic/service mode to verify operation; some models may require a configuration/personality step per the tech sheet
Do-It-Yourself Stories from Customers like You
Wouldn't allow "super" fill setting James L. • San Jose , CA • April 02, 2021
GE Washer m/n GTW460ASJ6WW would allow other fill levels, but when set to "super" it would never stop filling. Checked water inlet valve (by initiating a fill and unplugging the unit) to see if the inlet valve was sticking open, that was not the issue. Decided to replace the board even though it is a significant fraction of the cost of a new washer. Local appliance stores didn't have the board but APP did, and of course, they are open 24/7 while my local part stores have decided the weekend is...
Read more
More
$191.86
- Compare At:
-
$211.05
- You Save:
-
$19.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822278
The Whirlpool Defrost Timer is an OEM replacement part for Whirlpool refrigerators. The defrost timer regulates the automatic defrost cycle, which prevents ice buildup on the evaporator coils in the freezer compartment by sending a signal to the defrost heater to turn on and melt any ice buildup on the coils.
Causes of a bad defrost timer can include mechanical wear over time, electrical failures, or internal component damage. Prolonged usage and voltage spikes can also affect the timer's functionality.
Symptoms of a bad Defrost Timer include:
- Excessive frost buildup in the freezer compartment
- The refrigerator or freezer not maintaining the set temperatures
- Unusual noises coming from the appliance
- The appliance running continuously without cycling off
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Fridge runs too long
-
Fridge too cold
-
Frost buildup
See more...
Do-It-Yourself Stories from Customers like You
Defrost not working on upright 20 year old freezer W D D. • Spring , TX • September 19, 2014
A word of thanks to AppliancePartsPros - they delivered in one day. Ordered at 4PM CDT and received the part by noon the next day. Also, Alicia in the help department was able to locate an electrical diagram for my old freezer. This was essential for proper setup and her persistence in tracking down the diagram was top notch. Now on to my problem. One day I opened the freezer and found frost and thawing food. I attributed this to the door hitting an item in the freezer and not completely...
Read more
More
$33.95
- Compare At:
-
$40.06
- You Save:
-
$6.11
Genuine Ge part
By: Ge
Part Number: WR02X45206
The GE Water Filter Manifold is an OEM replacement part. It is a refrigerator water filter housing that ensures clean and refreshing drinking water. Measuring 10.2 x 6.2 x 2.2 inches. It features an easy-to-install design that makes replacing the old, worn-out manifold hassle-free.
Causes of a bad manifold can include cracks or damage from material fatigue, blockages from sediment build-up, or failures in the valve mechanisms that control water flow.
Symptoms of a bad part:
- Poor water quality and taste
- Low water pressure
- Water leaks or dripping from the filter housing
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Water manifold and ice door assembly flap repairs Darryl M. • Pinehurst , NC • September 02, 2020
*NOTE: These comments regard my experience with GE model PSHS6PGZBESS.
*Searched the web and reviewed several sites for water flow issue and diagnostic/repair and found Appliance Parts Pros. Watched their video for water-issue repair. The review validated the MWF Manifold repair part and its installation. In doing this research, I made a serendipitous discovery to repair the ice dispenser drip by replacing the Ice Door Assembly Flap part. Ordered both parts at standard shipping and...
Read more
More
$57.22
- Compare At:
-
$68.66
- You Save:
-
$11.44
Genuine Samsung part
By: Samsung
Part Number: DA29-00020B
The Water Filter is an OEM replacement part for Samsung refrigerators. This filter provides clean and fresh-tasting water by removing harmful contaminants such as chlorine, lead, and mercury.
If your current water filter is not functioning properly, it may be causing a variety of issues. Some common causes of a bad filter include clogging, improper installation, or simply being past its expiration date. Symptoms of a bad water filter can include a decrease in water pressure, strange tastes or odors in your water, or even discoloration.
The Samsung Refrigerator Water Filter is a reliable and efficient replacement part for your Samsung refrigerator. With its superior filtering capabilities and easy installation, you can enjoy fresh, clean water without any hassle! This OEM Samsung part can also be used on Kenmore/Sears appliances.
This part fixes the following symptoms
-
Leaking
-
Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You
My original shelves had broken two of them and i needed a new water filter Lisa R. • Bakersfield , CA • August 17, 2015
I called your company with the serial number of the fridge, and had the best service locating the exact items i needed. I placed by order . and company called to confirm my order and the method of my payment. Thank you very much
Read more
More
$63.55
- Compare At:
-
$71.34
- You Save:
-
$7.79
Genuine Frigidaire part
By: Frigidaire
Part Number: WF2CB
This Frigidaire Refrigerator Water Filter is an OEM replacement part for select Frigidaire brand refrigerators with a slide-out cartridge in the front compartment. Your refrigerator water filter reduces the chorine taste and odor from your water. It also effectively helps filter out sediment, including dirt, sand, and rust,
The filter is easy to install without the need for special tools and should be changed every 6 months. With an operating temperature range of 33-100°F and a pressure range of 30-100 PSI, this OEM part offers reliable performance. The filter measures approximately 6-3/4" x 5-1/4" x 2-1/4" and features a high-grade coconut carbon filter media.
For filter bypass order 242227702.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Touchpad does not respond
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Water overflowing from ice maker Denton H. • Holcomb , MS • November 09, 2014
Replaced ice maker
Read more
More
$68.37
- Compare At:
-
$82.04
- You Save:
-
$13.67
Genuine Ge part
By: Ge
Part Number: WD21X31910
The User Interface Control Board is an OEM part for GE dishwashers. It serves as the main control panel, allowing users to select and monitor various wash cycles and settings. This control board interfaces with the dishwasher's electronic system to ensure proper operation.
Causes of a bad control board can include electrical issues, exposure to moisture, or general wear and tear over time. Damage to the circuitry or components can also impair its functionality.
Symptoms of a bad user interface control board include:
- Unresponsive or malfunctioning buttons
- Display screen not working or showing incorrect information
- Inability to select or change wash cycles
- Dishwasher not starting or stopping unexpectedly
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My GE dishwasher control stopped functioning Stephen C. • Hillsboro , OR • September 16, 2023
The control went thru a month or so of erratic behavior; the display would come on and flash and beep without any input on my part. Then it died completely. I did a little research on the GE website and determined likely cause waa a defective user interface board. I found AppliancePartsPros.com and contacted their tech support, who directed me to check the output of the control board across 2 pins for 13.5v DC. I did this, and measured 13.8v, so control board was good. When I reconnected the...
Read more
More
$129.95
- Compare At:
-
$155.94
- You Save:
-
$25.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185992
The Dryer Timer is an OEM part for Whirlpool dryers. This timer is a control mechanism that allows you to set the drying time for various fabrics and load sizes. It works by regulating the duration of the drying cycle to ensure clothes are dried efficiently without overuse of energy or excessive wear on fabrics.
Causes of a bad dryer timer can vary from electrical problems within the timer mechanism, such as short circuits or burnt contacts, to mechanical failures like stripped gears.
Symptoms of a bad timer:
- The dryer not starting or failing to stop at the end of a cycle
- Clothes remaining damp or overly dry
- The dryer operating only at a specific setting
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Timer quit working Gene B. • Sandia , TX • August 12, 2019
Ordered new timer and fixed the problem
Read more
More
$117.25
- Compare At:
-
$139.53
- You Save:
-
$22.28
Genuine Frigidaire part
By: Frigidaire
Part Number: ULTRAWF
The Water Filter is an OEM replacement part for Frigidaire refrigerators. This PureSource Ultra Ultrawf Refrigerator Water Filter is designed to provide superior filtration, ensuring that your water and ice are clean and refreshing.
With the Frigidaire Refrigerator Water Filter, you can enjoy up to six months of crystal-clear water and ice. For the filter bypass, order part number 242294402. Get the most out of your Frigidaire appliance with a new OEM water filter, and enjoy clean, refreshing water and ice every time!
Causes of a bad part:
- Overused or expired
- Clogged by excessive impurities
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Not dispensing water
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Ice maker stopped woprking Robert M. • Greer , SC • October 08, 2015
This was a tough fix because there were two causes to my problem - a stuck water valve and a bad ice maker. I first replaced the water valve, but that did not resolve the problem. Tested existing water valve and found that the valves were working properly. Returned the water valve - easy RMA process and no issues. Replaced the ice maker and problem solved.
Read more
More
$82.95
- Compare At:
-
$98.71
- You Save:
-
$15.76
Genuine Frigidaire part
By: Frigidaire
Part Number: EPTWFU01
The Frigidaire PureSource Ultra II Refrigerator Water & Ice Filter is an OEM part for Frigidaire refrigerators provides clean, fresh-tasting water and ice. This advanced filtration system is specifically engineered to remove impurities and contaminants from your water supply, including lead, chlorine, mercury, and certain pesticides, without removing beneficial fluoride.
Regular replacement of the water and ice filter is crucial for maintaining the quality of your drinking water and the efficiency of your refrigerator's water and ice dispensing system. Over time, filters can become saturated with contaminants, reducing their effectiveness and potentially impacting the taste and safety of your water.
Symptoms of a filter in need of replacement include:
- Reduced water flow from the dispenser
- Unpleasant taste or odor in the water and ice
- The refrigerator's water filter indicator light turning on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Needed new water filter for refrig Thomas F. • Wallingford , CT • November 19, 2018
Change filter
Read more
More
$83.69
- Compare At:
-
$99.59
- You Save:
-
$15.90
Genuine Ge part
By: Ge
Part Number: WE4M533
The Timer is an OEM part for GE dryers that is responsible for ensuring that the dryer operates for the set amount of time, enabling different cycles and functions to occur at the correct intervals. The timer regulates the start, duration, and end of each drying cycle. Over time, timers can wear out or malfunction due to electrical issues or mechanical wear, leading to problems with the dryer's operation.
Symptoms of a bad Timer include:
- The dryer failing to start or stop at the proper times.
- Only certain cycles working.
- The dryer running continuously without shutting off.
Causes of a bad timer can stem from a variety of issues, including electrical shorts, worn contacts within the timer mechanism. Regular usage and age can contribute to these problems.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Could not turn the timer to set the washer cycle Jay C. • Wadsworth , OH • November 12, 2014
After taking the timer apart to see why it would not turn I found the timer motor was jammed. Taking the motor apart I found a broken gear. Looked up the model number of the dryer and found a new timer assembly thru appliancepartspros.com I ordered, a very easy process, received the part 2 days later. Installed the assembly in about 5minutes and had the dryer back up and running
Read more
More
$91.95
- Compare At:
-
$108.50
- You Save:
-
$16.55
Genuine Ge part
By: Ge
Part Number: WE04X25280
The Timer is an OEM part for GE dryers. It is responsible for controlling the duration of the drying cycles by regulating the electrical components within the dryer. This component ensures that the dryer runs for the correct amount of time based on the selected settings, enabling efficient and effective drying of clothes.
Causes of a bad timer can include electrical failures, worn-out contacts, or internal mechanical issues. A malfunctioning timer can lead to improper cycle durations, the dryer not starting, or stopping prematurely.
Symptoms of a bad timer include:
- The dryer not advancing through the drying cycles
- The dryer stopping mid-cycle or running continuously without stopping
- The timer knob not moving or making unusual noises
- Inconsistent drying times or clothes not drying properly
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer selector knob and timer broken John L. • Jacksonville , FL • June 11, 2019
The selector knob and timer quit working on our GE dryer. We noticed the plastic selector knob was cracked inside when we pulled it off. We decided to order a new timer along with the selector knob just in case the new knob didn't solve the problem. We put on the new knob as easy as we pulled it off and the dryer would turn on again, however it was not going off in the selected amount of time it was supposed to. So it turns out we did need the timer part as well. These parts came in the...
Read more
More
$77.52
- Compare At:
-
$93.02
- You Save:
-
$15.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304518034
The Defrost Timer is an OEM replacement part for Frigidaire upright freezers. It serves as a crucial component responsible for regulating automatic defrost cycles.
Causes of a faulty defrost timer relate to 20,000+ hours of constant exposure to freezer temperatures as low as -10 degrees Fahrenheit. Such extremes can compromise electrical switching mechanisms over prolonged usage periods.
Symptoms of a failed defrost timer include:
- Inability to initiate automatic defrost modes
- Excessive ice and frost accumulation inside cabinet
- Warm areas detected due to impaired fan circulation
- Diagnostic codes indicating defrosting problems
This genuine Frigidaire replacement part is compatible with Kelvinator and some Kenmore units as well.
Do-It-Yourself Stories from Customers like You
Freezer would not shut down kept running continuously Jd F. • Russellville , AR • October 22, 2014
Suspected it was the thermostat, since temperature stayed the same at multiple settings over a 24 hr period. There was only three components inside the freezer besides the evaporator, the fan was working, so I decided to just go ahead and replace the thermostat and defrost thermostat. Also replaced the defrost timer by the compressor, just to get all the old parts replaced with new. I had already replaced the compressor, so now I've pretty much have a new freezer. The new parts works great and...
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10325124
The Phase Control Board is an OEM part for Whirlpool mixers. It regulates the mixer's motor speed by controlling the electrical current flowing to the motor, ensuring precise speed settings and smooth operation. This board is essential for achieving consistent mixing results and handling various mixing tasks effectively.
Causes of a bad phase control board can include electrical surges, wear and tear from regular use, or component failure due to overheating. A faulty control board can lead to inconsistent speeds, affecting the mixer's performance and potentially damaging the motor.
Symptoms of a bad phase control board include:
- Inconsistent or erratic mixer speeds
- Mixer not starting or stopping unexpectedly
- Unusual noises or burning smells during operation
- Mixer operating at only one speed regardless of setting
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: This is the 120-volt phase control board. For the 240-volt board use W11174552.
Do-It-Yourself Stories from Customers like You
My kitchenaid k5 ss had only one speed fast! Alice F. • El Dorado , KS • December 13, 2014
I read a few of your reviews and found that a, "Phase Control Board" may be the problem. It was! Talk about easy to install... It was super easy! I decided to order the, "Speed Control Plate" also as a precaution (Shipping was one price - and it arrived the very next day, Wow! I didn't expect that.) With my screwdriver and good lighting. I fixed it myself! My husband is still in shock. I used forceps to install the, "Speed Control Plate," because I needed something to hold the tension wire - at...
Read more
More
$15.95
- Compare At:
-
$19.14
- You Save:
-
$3.19
Genuine Ge part
By: Ge
Part Number: WD21X31899
The Configured UI Board is an OEM part for GE dishwashers. It serves as the central control unit, managing all operations of the dishwasher including cycles, temperatures, water levels, and timings. The UI board has all necessary wiring and components factory-installed to seamlessly interface with existing control panels and buttons.
Causes of a bad UI board can include water damage, cracked or loose circuitry, or failures of electronic components over time. Without a functioning UI board, the dishwasher cannot run cycles or sense user inputs.
Symptoms of a bad UI board include:
- The dishwasher not starting or running cycles
- Control panel malfunctions like unresponsive buttons or odd error codes
- Inability to select desired cycles or change settings
- Appliance failing to self-diagnose or display problems
This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
No lights but did have power (GE dishwasher) Jeffery S. • Spicewood , TX • January 25, 2021
First I watched Youtubes and decided it was the lower control board, ordered it from Appliance Parts Pros, and got it within 2 days. Installed it and no change.
Called Appliance Parts Pros to repair the help line and they were very helpful told me I needed the upper board (UI) so I ordered it got it also in 2 days installed it and everything works perfectly.
Appliance Parts Pros is very helpful and prompt in shipping. Highly recommend.
Read more
More
$108.95
- Compare At:
-
$128.56
- You Save:
-
$19.61