Circuit Board Parts

The Dryer Timer is an OEM part for Frigidaire dryers. It is responsible for controlling the drying cycles by regulating the amount of time the dryer runs. The timer ensures that clothes are dried according to the selected settings, contributing to efficient and effective drying performance.

Causes of a bad timer can include electrical issues such as a short circuit, worn-out internal components due to frequent use, or exposure to moisture that can damage the timer mechanism.

Symptoms of a bad Dryer Timer include:

• The dryer not advancing through cycles
• The dryer running continuously without shutting off
• Inconsistent drying times
• The timer knob not turning or feeling loose

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This dispenser module controls the refrigerator's ice and water dispensing functions and user interface. Replace a failed module to restore responsive dispensing, indicator lights, and consistent operation at the dispenser.

• Interprets button/paddle inputs and manages dispenser functions
• Coordinates ice and water dispensing operations
• Controls dispenser indicator lights/display for user feedback
• Failure can cause no dispense, unresponsive controls, or erratic/loss of lights

• Disconnect power and shut off water supply before service
• Remove the dispenser trim/panel carefully to access the module; protect against static discharge
• Note wire positions; transfer connectors and any reusable covers/overlays from the original part if applicable
• Restore power and test ice and water dispensing after installation

The Refrigerator Main PCB Assembly is essential for ensuring your Samsung refrigerator operates smoothly. This main PCB assembly controls all the critical functions of your appliance, including temperature regulation, defrost cycles, and display indicators. By replacing a faulty main PCB with this genuine OEM part, you can restore your refrigeratorGÇÖs performance and reliability without compromising on quality. Designed specifically for Samsung refrigerator models, this part guarantees a secure fit and seamless integration with your existing system. The Refrigerator Main PCB Assembly enhances the overall functionality of your fridge, ensuring that all features work correctly and efficiently. Whether your refrigerator is experiencing erratic behaviors, temperature issues, or display malfunctions, this genuine OEM part provides a dependable solution. Easy to install, it allows you to perform the repair yourself, saving time and reducing the need for professional service. Invest in the Refrigerator Main PCB Assembly to maintain the optimal performance of your Samsung refrigerator and enjoy a consistently fresh and well-functioning appliance.

This electronic control board regulates power and coordinates your appliance's operations. Replacing a failed board can restore reliable performance when the unit is unresponsive, behaves erratically, or repeatedly shows error conditions.

• Regulates and distributes power to key components per the control logic
• Processes signals from sensors and user controls to execute functions
• Coordinates timing and operation of cycles/features
• Common failure signs include: won't power on or start, unresponsive controls, intermittent shutdowns, blank/flickering indicators, or recurring error codes

• Disconnect power before servicing; verify no voltage is present
• Use ESD protection and handle the board by its edges
• Photograph wiring and move connectors one at a time to the matching keyed terminals
• Mounting points and setup can vary; some models may require service-mode checks or initialization after installation

This washer timer is the cycle controller that governs fill, wash, rinse, drain, and spin. Replacing a worn timer restores proper cycle advancement when the washer won't start, stalls mid-cycle, or repeats steps.

• Directs power to inlet valves, drive motor, and drain pump in the correct sequence and duration
• Advances the cycle through fill, wash/agitate, rinse, drain, and spin
• Common symptoms include a cycle that won't start or advance, stops mid-cycle, or no agitation/drain/spin across multiple settings
• Causes intermittent or inconsistent timing between steps

• Disconnect power before servicing
• Open the control console and remove the timer's mounting screws
• Transfer wires to the new timer one at a time, matching positions (take a photo for reference)
• Mount the new timer, attach the existing knob/dial as configured on your model, restore power, and test

This electronic control board manages your oven's display, keypad inputs, and heating functions. Replacing a failed board can restore responsive controls, proper bake/broil operation, and reliable timing so your range or wall oven works as designed. What it does:

• Interprets keypad inputs and updates the clock/temperature display
• Controls bake and broil circuits via onboard relays
• Monitors the oven temperature sensor to regulate heat
• Runs cooking modes and timers

• 1 electronic control board assembly

• Disconnect power at the breaker before servicing; verify no power is present
• Handle the board by the edges and use ESD precautions
• Note/photograph wire locations; transfer any brackets or supports from the original board
• After installation, restore power and test bake/broil functions to confirm operation

This refrigerator electronic control board manages key cooling and defrost functions. Replacing a failed board helps restore accurate temperature regulation and responsive operation so the appliance runs as designed.

• Regulates compressor and fan operation based on temperature sensor inputs
• Controls the automatic defrost cycle to prevent frost buildup
• Coordinates signals to the user controls/display and other components
• Common failure symptoms: not cooling or intermittent cooling, unit won't run, excessive frost/ice, unresponsive or erratic controls

• Disconnect power to the appliance before service
• Use anti-static precautions; handle the board by the edges only
• Photograph wiring; move connectors one at a time to the matching terminals on the new board
• Ensure all connectors are fully seated before reassembly and testing

This electronic control board manages the oven's heating functions and the clock/timer display. Replacing a failed controller restores accurate temperature control, reliable cooking modes, and a working display on your range or wall oven. What it does:

• Controls heating element relays based on user input and temperature sensor feedback
• Operates the digital display, clock, and kitchen timer
• Coordinates oven modes such as preheat, timed bake, and self-clean
• Common symptoms of a failing board: no heat or erratic temperatures, blank/unresponsive display, beeping or error codes, inability to start or cancel bake/broil

• 1 electronic control board (controller) assembly

• Disconnect power at the breaker before servicing; this board carries live voltage
• Access through the control panel; remove panels/screws as needed to reach the board
• Move wire connectors one at a time from the old board to the new; take photos for reference
• Use ESD protection and avoid touching circuitry; set the clock and test all oven functions after installation

This replacement dryer timer controls cycle selection and run time. The plastic-shaft version restores positive knob engagement and timing control for reliable cycle advancement and shutoff.

• Advances the dryer through timed cycles and ends the cycle at the selected setting
• Directs power to the correct circuits as the cycle progresses
• Common symptoms: timer won't advance or stops mid-cycle
• Knob spins, slips, or won't engage the timer; dryer runs too long or won't shut off

• Disconnect power; if gas, also shut off the gas supply
• Access the timer from the control panel; remove knob and panel as needed
• Move wires from the old timer to the new timer one at a time to matching terminals
• Mount the timer securely, reassemble the console, reinstall the knob, and test operation

This is the cycle timer for a washing machine. It controls the sequence and duration of wash, rinse, and spin cycles so the washer progresses through a complete program as selected.

• Rotates internal contacts to switch the motor, pump, fill valves, and spin on and off in order
• Helps resolve issues like a washer not advancing cycles, stopping mid-cycle, or skipping wash/rinse/spin
• Also addresses irregular cycle timing or a timer that won't turn/advance when set

• Disconnect power before servicing; turn off water supply for safety
• Access is typically from the control console; transfer wiring one at a time to matching terminals
• Mount the timer to the panel and ensure the timer shaft aligns with the control knob and dial
• Test a short cycle after reassembly to ensure proper advance through each step

This electronic control board is the dishwasher's main circuit board. It directs wash, drain, and dry functions and coordinates the user interface. Replacing a failed board restores responsive controls and reliable, complete cycles.

• Times and sequences wash, drain, and dry operations
• Distributes power to the circulation pump, drain pump, inlet valve, and heating circuit
• Monitors sensors and door switch; communicates with the display/indicator lights
• Common symptoms: won't start, unresponsive controls, cycles that stall or never advance, blinking lights or error codes

• Disconnect power at the breaker before servicing; verify no voltage is present
• Use ESD protection and handle the board by its edges
• Label/photograph connectors; transfer any mounting brackets or jumpers from the original board
• Some models require configuration/programming after install—follow the tech sheet stored inside the unit

This is a refrigerator control board. It makes sure all the appliance processes run as expected. It links up with other internal parts to ensure the correct level of cooling. The part is made of durable materials and includes a small display. This offers information to users about the current temperature inside the refrigerator. The screen can crack or internal parts of the control board can become damaged. This can cause the refrigerator to stop cooling or running entirely.If the control board is damaged or not working correctly, it should be replaced. First, access the back of the appliance and unplug it from the wall. Remove the screws that hold on the cover to work with the control board. Make notes about where the wires are connected before removing the board. The new replacement part should have the wires reconnected in the same locations. Replace the cover and turn the power back on.The control board is compatible with several refrigerators made by Frigidaire. It is sold on an individual basis and sourced directly from the manufacturer. This is a genuine OEM replacement component.

This pre-programmed user interface control board assembly manages the buttons and display on your appliance's control panel. Replacing a failed UI board restores responsive controls and accurate indications from the panel. What it does:

• Interprets keypad inputs and drives the display/indicator LEDs
• Sends user selections to the main control for proper operation
• Helps resolve an unresponsive or intermittent control panel
• Addresses blank, flickering, or garbled display behavior

• 1 pre-programmed user interface control board assembly

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD protection; handle the PCB by the edges only
• Photograph wiring and ribbon connections; match keyed connectors and orientation on reassembly
• Reuse existing mounting hardware, trim, and overlays as needed; ensure all harnesses are seated before restoring power

This speed control regulates and stabilizes motor speed in your appliance. Replacing a faulty control restores smooth start-up and accurate speed selection so the motor runs consistently at the setting you choose.

• Modulates power to the motor to reach and hold the selected speed
• Helps correct issues like surging, stalling, or running only at one speed
• Common symptoms include erratic speeds, failure to start, or sudden speed changes
• Also presents as an unresponsive speed selector or inconsistent performance

• Disconnect power before servicing and allow components to discharge
• Access the control per your model's service information; note wire locations or take photos
• Transfer connectors one at a time; seat fully and handle electronics with ESD care
• Reassemble and test operation through all speed settings; perform any model-specific calibration if required

This defrost timer cam replaces the plastic cam on a mechanical defrost timer. It restores the timer's changeover between cooling and defrost, helping prevent frost buildup on the evaporator and temperature swings inside the refrigerator.

• Mounts on the timer shaft to actuate the internal switch between cooling and defrost
• Helps resolve issues like heavy frost on the evaporator, warm fresh food section, or a unit stuck in defrost/run
• Corrects timer advancement problems caused by a stripped, cracked, or missing cam
• Typically installed with the defrost timer in the control housing or rear service area

• Disconnect power before servicing
• Access the defrost timer and note the original cam's orientation for reference
• Remove any retainer, pull the old cam straight off, and press the new cam fully onto the shaft without forcing
• Reassemble, then manually advance the timer to confirm it switches modes before restoring power

This mechanical timer controls the wash-cycle sequence on top-load washers—coordinating fill, agitate, drain, and spin. Replacing a failed timer restores proper cycle advancement and reliable start/stop so each step runs at the correct time.

• Controls the timing and order of fill, wash/agitate, drain, and spin functions
• Switches power to the motor, pump, and water inlet valve at the proper moments
• Common failure symptoms: cycle won't advance or stops mid-cycle; skips agitate or spin; runs past the end of the cycle
• Knob doesn't advance or must be manually turned to proceed between steps

• Disconnect power before servicing; turn off water if you'll be moving hoses
• Access through the control console; photograph wiring and transfer connectors one at a time to matching terminals
• Mount the timer securely and align the shaft with the knob/dial—do not force the shaft
• Reassemble the console and run a test cycle to proper advancement