Need Help?
Call or text
Dispenser won't latch or close? This detergent dispenser releases soap at the right time. Moderate DIY repair requiring inner door panel removal.
I ordered the part, looked at a YouTube instructional video on how to do it, and did it myself. It wasn't too hard, and I have no experience. I received the part very quickly! Read more
Dishwasher won't advance past rinse or keeps running? Timer controls wash, rinse, and dry cycle duration. Common DIY repair, typically 30 minutes.
Replaced the Timer and Solenoid in 30mins very easy. APPros, fast shipping is amazing! Read more
Dishwasher won't advance through cycles or stops mid-cycle? This timer controls wash, rinse, and dry durations. Moderate DIY repair, 1-2 hours.
Replaced the timer and drain solenoid (timer had stuck in "solinoid active" position long enough to burn up the solenoid). Complete the project in two stages on two separate days: 1) replaced solenoid, which took about 30 minutes, 2) replaced timer. Accessing both was straight forward on this simple design dishwasher. Removed the kick panel to access the solenoid. Removed 3 screws and a circlip to remove the old solenoid. Reversed the process to complete this part of the repair. The... Read more
Broken or cracked dispenser drawer causing detergent leaks? Replace your washer's detergent drawer. Easy 90-second install, no tools needed.
Found the parts on appliance parts pros and ordered them. It was amazing one arrived the next day and the other just the day after that it was so quick! There wasn't any real assembly just pulled the old drawer out and put in the new one! Read more
Soap dispenser won't open or release detergent during wash cycle? This detergent dispenser assembly fixes dispensing issues. 10-minute DIY repair.
My husband expected we needed a new dishwasher but I insisted on trying to fix it first. You need a Torx screwdriver so make sure you have a set. A little difficult to get cover back on and lined up by myself, but I managed and this was my first attempt at major appliance repair. I replaced the entire console and the dispenser. Still working after 3 loads so my husband may have to eventually admit that I fixed it. Read more
Fix a dishwasher with no lights, no power, or won't start. This user interface control board manages all electronic functions. Moderate 2-hour repair.
I had to remove the dishwasher about 6 inches then remove the door springs and remove the door. Next was to open the cover to reach the circuit board and remove it. The new board was put in and attached the plug. and put the door back together and reinstall the door and springs. Turned the power to check that the lights came on. After confirming I again had power, I turned the breaker off and reinstalled the dishwasher in the cabinet and restored power. Lastly I ran the machine to ensure that... Read more
Ice maker stopped making ice or won't harvest? This ice maker assembly replaces the complete unit. DIY-friendly repair takes about 10-15 minutes.
The tech sheet test 56 said the motor wouldn't return to zero. I ordered the "Ice Maker Assy-Lp, and the Valve Assy-Water Dual". On my particular model the ice maker is in the ceiling of the refrigerator box. After removing the water filter and two screws around the drop down water filter door, the right side panel drops down by pulling it apart from 3 plastic pop-ins. Two of them broke when the repair guy man handled it. Pulling easy and supporting the inside pieces is key. Then I unplugged... Read more
Fix a detergent dispenser that won't open or leaks rinse aid. Replaces the complete dispenser assembly. Moderate DIY repair with video guide.
Replaced dispenser Read more
Fix a dishwasher with no lights on the control panel or buttons that won't respond. This user interface board controls cycle selection and display.
GE Dishwasher would beep intermittently over the course of about a month. It then began to shut itself off. I would have to reset the breaker to get it to come on. Eventually, it stopped working altogether. After confirming that I did in fact have proper power to the appliance. The main control board had power and was in good shape. I then traced the problem to being a bad UI board. Which I found with the help of a nice lady over the phone at AppliancePartsPros.com. Read more
Dishwasher won't start, buttons unresponsive, or display shows error codes? The main control board manages all functions. Moderate DIY repair.
Just removed from front and the console. I wound up replacing the control board because the technician that I had come out said that's what was wrong and it would cost $250 to fix. I replaced the control board and it didn't fix the problem. After doing more research and searching out the error codes, I discovered I had to replace the console. so i did. I was able to return this control board and buy the console. That return policy was fantastic. I was so worried I was going to have to eat the... Read more
Fix ice not dispensing issues caused by a cracked or broken drive cup. This refrigerator ice maker part secures the auger for proper dispensing. DIY repair.
Followed the steps in the video. Just ensure you slide the auger forward so it clears the housing before trying to remove it. Read more
Dishwasher won't start or displays flashing lights? The control board manages cycles, detergent dispenser, and water release. DIY repair in 10 minutes.
I went to appliancepartspro.com and found out that the problem could be the main circuit board. I went on and ordered the part, knowing it could be returned if necessary, but it was like music to my ears when I installed the part, myself, and turned the power back on. Easy. Thanks appliancepartspro. Read more
Ice maker producing broken cubes or leaking? The ice cube tray often cracks over time. Simple DIY repair—remove 2 screws, unplug, and replace. Video guide.
The amount of water being dispensed into the ice cube tray was excessive, causing overflow of the tray. The water then ran into the collection bin and even down the side walls of the freezer creating a huge block of ice in the bin, and ice all over the lower shelves as well. The excessive build up of ice caused the cube tray to crack and also split the little silicone water grommet that connects to the water delivery tube which directs water into the cube tray. Look out for that little tube... Read more
Fix ice not dispensing or auger not turning issues. This coupler connects the motor to the ice bin auger. DIY-friendly repair, about 20 minutes.
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed... Read more
Fix a rinse aid door that won't stay closed or causes leaks. This dishwasher dispenser door with gasket snaps on in minutes. Easy DIY repair.
Twist the old one out, insert tab, twist until other side snaps in. Easy as pie after watching the video! Read more
Ice dispenser not working or crushed ice won't dispense? This crusher cover protects the ice crushing mechanism. Easy DIY repair with step-by-step video.
First - I am not a handyman so bear with me. Turned out not only the auger fins were broken off but also the ice dispenser crusher cover had cracks and breaks on it. First - AppliancePartsPros.com has awesome shipping. Because i didn't know right away the crusher cover was broken, I had to do two orders. Each order was received next day in afternoon. Video is great. Tells exactly how to do. There are two issues you will run into. Remembering the exact sequence of all the washers and... Read more