42 Belt Parts

This replacement belt links the drive motor to the appliance's drive system so the drum or tub can rotate during operation. Replacing a stretched, cracked, or broken belt restores proper movement and reduces slippage and noise.

• Transfers motor rotation to the drum or tub to enable tumbling or spinning
• Common symptoms: drum/tub not turning, intermittent movement, or cycle runs but contents don't tumble/spin
• Squealing, thumping, or burning-rubber odor from belt slippage
• Visible fraying, glazing, or cracks on the belt surface

• Disconnect power and allow the unit to cool before servicing
• Note belt routing/tension before removal; take a photo for reference
• Inspect idler/tensioner and motor/drum pulleys; replace worn components to prevent premature belt wear
• After installation, hand-rotate the system to verify alignment and tracking before test run

The Belt is an OEM part for Speedqueen washers. Transmits power between the motor and pulley system to turn the basket. Without a functioning belt, the washer will be unable to properly rotate the drum and agitate laundry during cycles.

Causes of a bad belt can include cracking, stretch wear or fatigue caused by age, prolonged use or excessive loads. Damage may also be due to slipping off pulleys.

Symptoms of a bad Belt include:

• Noise or squealing coming from the drive area
• The basket or agitator not spinning or turning slowly
• Motor overheating due to increased load from a slipping belt
• Belt slipping off or breaking completely

This dryer drive belt wraps around the drum and motor pulley to rotate the drum during the cycle. Replacing a worn or broken belt restores proper tumbling so clothes move freely for even drying.

• Transfers motor power to the drum to enable tumbling
• A worn, stretched, or broken belt can cause the drum not to turn
• May also result in the dryer running but not tumbling
• Visual signs include fraying, cracks, or glazing on the belt

• Unplug the dryer before servicing; allow components to cool
• Access typically requires removing the front panel and/or top panel
• Note the belt routing around the motor pulley and idler before removal
• Inspect drum rollers and idler pulley while the belt is off; replace if worn

The Drive Belt is an OEM part for Bosch washing machines. This belt connects the motor to the drum, enabling the drum to spin during the wash and spin cycles. This belt measures  49.4 inches and replaces a broken or damaged original belt. With 5 ribs and 4 grooves, the high-quality belt transfers drive power to rotate the drum.

Causes of a bad drive belt include normal wear and tear over time, overloading the washer, or a misalignment of the belt and pulleys. These issues can reduce the efficiency of the washing machine and cause it to malfunction.

Symptoms of a bad drive belt include:

• The drum not spinning or agitating
• Unusual noises during operation
• Burning smell from the washer
• Washer stopping mid-cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This agitate & spin drive belt transfers motor power to the washer's transmission and spin mechanism. Replacing a worn belt restores proper agitation and spin performance and helps prevent slipping noise or burning-rubber smells.

• Links the drive motor to the main pulleys to power both agitation and spin
• Replaces a broken, stretched, or glazed belt that slips under load
• Common symptoms: no spin or no agitation, weak/slow spin, squealing, burning-rubber odor, visible cracks or fraying
• Helps ensure smooth, consistent tub movement and complete cycles

• Disconnect power and water; wear cut-resistant gloves
• Access the belt from the bottom or rear, per your model's service procedure
• Release belt tension (motor carriage/idler), remove the old belt, and route the new belt around the motor and drive pulleys as shown on the unit
• Rotate by hand before restoring power and running a test cycle

Made by Whirlpool. Fits most Whirlpool and Kenmore belt driven washers. Size: 1/2 inch x 47.5 inches long.

The Washer Drive Belt V is an essential component for maintaining the smooth operation of your Samsung washer. Designed specifically for Samsung washing machines, this genuine OEM part ensures a perfect fit and reliable performance. Crafted from high-quality materials, the Washer Drive Belt V provides consistent tension and durability, allowing your washer to spin and agitate clothes effectively. Replacing a worn or broken belt with this genuine OEM part can restore your appliance's functionality, preventing further damage and extending its lifespan. Installation is straightforward, making it a convenient solution for DIY repairs. By choosing the Washer Drive Belt V, you benefit from improved washer performance and efficiency, ensuring your laundry cycles run smoothly every time. Trust in the quality and compatibility of this genuine OEM part to keep your Samsung washer operating at its best, providing you with dependable and long-lasting results.

This 5-rib poly-V drive belt transfers the motor's power to the appliance's drive system so the drum or basket turns smoothly. Replacing a stretched, glazed, or broken belt restores proper rotation and reduces slipping and noise.

• Transfers motor rotation to the drive system to spin or tumble the drum/basket
• Provides the necessary friction grip across pulleys; a worn belt may slip under load
• Typical symptoms: squealing or chirping, burning rubber odor, slow or no spin/tumble, visible cracks or fraying
• Intermittent movement at startup can also indicate belt wear

• Disconnect power and allow moving parts to stop before servicing
• Access the belt through the service panel(s) per your model's service information and note the routing path
• If equipped, release the belt tensioner/idler, remove the old belt, route the new belt, then reapply tension
• Rotate the pulley/drum by hand to seat the belt and verify alignment before reassembly and test

The Blower Belt is an OEM part for Bosch dryers. This belt efficiently transmits rotation from the motor to the blower fan, circulating heated air through the dryer drum.

Causes of a bad blower belt can include drying and cracking from heat exposure over many cycles.

Symptoms of a bad blower belt include:

• The blower fan not spinning or rotating slower than usual
• Longer dry times or an inability to fully dry clothes
• An intermittent squealing or squeaking noise from the belt

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This poly-V blower belt links the motor to the blower wheel to move air through the appliance. Replacing a worn or broken belt restores proper airflow and helps maintain reliable drying/venting performance. What it does:

• Transfers motor rotation to the blower/impeller to circulate air
• Helps maintain proper airflow through the cabinet and exhaust
• Common failure signs include weak or no airflow at the vent, longer run times, or safety shutdown from poor airflow
• Physical clues: belt broken, frayed, glazed, stretched, or squealing from the blower area

• 1 poly-V blower belt

• Disconnect power and, if applicable, shut off gas supply before servicing
• Access varies by model; remove panels or blower cover to reach the belt
• Note routing; seat belt ribs in pulley grooves and ensure correct tracking
• Rotate the blower by hand to confirm alignment before reassembly and test run

This replacement drive belt transfers power from the motor to the appliance's moving component. Replacing a worn, stretched, or broken belt restores proper motion and helps eliminate slippage, noise, and poor performance.

• Transfers motor rotation to a pulley-driven component
• Maintains proper grip and tension when routed over the idler/tensioner
• Ideal replacement for belts that are cracked, glazed, frayed, or broken

• Disconnect power; turn off gas supply if applicable
• Access the belt through the service panel per your model's service information
• Note the routing and idler/tensioner position before removal; take a photo for reference
• Inspect pulleys and the idler for wear; alignment and belt tension after installation

This drive belt transfers the motor's power to the machine's drive system so the tub or drum can rotate. Replacing a stretched, glazed, or broken belt restores consistent movement and helps eliminate slippage noises and burning-rubber odors.

• Transfers rotation from the motor pulley to the drive/transmission pulley
• Typical symptoms of a worn belt: no spin or weak spin, no agitation, motor runs but tub/drum doesn't move
• Visual signs include cracks, fraying, glazing, or excessive slack

• Disconnect power; turn off water supply before servicing
• Access the belt by removing the appropriate panel; note the belt routing before removal
• Release the tensioner or loosen motor mounts to remove the old belt, then fit the new belt around the pulleys and rotate by hand to seat it
• Confirm proper tracking and clearance before reassembly and test run

This drive belt turns the dryer drum by linking the motor pulley and idler assembly. Replacing a stretched or broken belt restores smooth tumbling performance and helps eliminate slippage noises so clothes can dry evenly. What it does:

• Transfers motor rotation to the drum for consistent tumbling
• Works with the idler/tensioner to maintain proper belt tension and grip
• Typical failure symptoms: drum won't turn, motor runs but drum is still, squealing or thumping noises, burning-rubber smell, or a visibly frayed/split belt
• On models with a belt switch, a broken belt can stop the dryer shortly after starting

• 1 drive belt

• Disconnect power; for gas dryers, also shut off the gas supply
• Access the belt by removing the top and front panels; support the drum when the front is off
• Release belt tension from the idler, note the routing, and install the new belt around the drum, idler, and motor pulley per your model's diagram
• Rotate the drum by hand to seat the belt before reassembly and testing

This is a replacement dryer drive belt that wraps around the drum to turn it during drying cycles, restoring proper drum rotation for even drying. Designed to fit specified GE laundry dryers that use this OEM part number. What it does:

• Wraps around the dryer drum and motor/idler to transmit motor power and rotate the drum
• Replaces a stretched, cracked, frayed, or broken belt that causes the drum not to tumble
• Stops slipping or intermittent rotation that can lengthen drying times or prevent tumbling
• Helps eliminate squealing or grinding noises caused by a failing belt rubbing on components

• One dryer drive belt

• Disconnect power to the dryer before starting any repair; follow lockout/tagout best practices
• Access the drum per your model's service instructions (top/front panel or rear panel removal may be required)
• Route the belt around the drum and over the idler pulley/motor shaft as shown in your service diagram; ensure proper belt alignment and tension before reassembly
• Inspect idler pulley, rollers, and drum glides for wear while the dryer is open; replace if worn to prevent premature belt failure

This replacement drum belt wraps around the dryer drum and motor pulley to rotate the drum for normal drying. Replaces worn or broken belts to restore tumbling and help your dryer move loads evenly. What it does:

• Transfers motor power to the drum so clothing tumbles during the drying cycle
• Commonly used when the drum slips, won't turn, or makes a rubbing/squealing noise
• Helps maintain proper drum alignment and smooth rotation when in good condition

• Disconnect power before any service; follow the dryer's service manual for safe access
• Inspect idler pulley and motor shaft for wear when replacing the belt
• Re-tension and route the belt per the OEM diagram to avoid mis-tracking

This genuine OEM-style agitate and spin drive belt transfers motor power to the washer's transmission and tub, restoring normal agitation and spinning for effective wash and drain cycles. What it does:

• Wraps around motor pulley and transmission/tub pulley to drive both agitation and spin actions
• Replaces worn, glazed, cracked, or stretched belts that cause slipping or no spin
• Helps eliminate squealing or burning-rubber smells from a slipping belt
• Restores proper belt tension for consistent wash performance

• Disconnect power before starting any repairs to avoid shock or injury
• Inspect pulleys and idler/tensioner for wear and alignment; replace if damaged
• Route the belt per the washer's service diagram and verify proper tension before test running