Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more
Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.
Microwave won't turn on or is completely dead? A blown fuse is often the cause. This safety fuse protects against power surges. Easy 5-minute DIY fix.
I read on line about other such ovens doing the same thing mine was doing, absolutely nothing! I even read stories of a major retailer telling customers to throw the microwave away. There's nothing you can do to fix it. After replacing a simple fuse that I ordered from you, the Advantium is as good as new. It took a grand total of 5 minutes to make the repair. The shipping cost more than the part, but it was all very worthwhile. Read more
Replace your microwave's halogen light bulb when interior lighting dims or fails. Restores visibility for monitoring cooking. Verify fit with your model.
Removed light cover. oven was above range type and light assbly is at rear bottom of unit. access and visibility of bulb sockets a bit difficult, Usen hand hell mirror to assist . Bulb extraction and insertion a snap. Read more
Turntable stopped turning or making grinding noise? This motor rotates the glass plate for even cooking. Easy 5-10 minute DIY fix with basic tools.
I fix this problem by purchasing a new turntable motor. Simple 5 minute installation. Read more
Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.
Wife let me know the microwave was making grinding noise while I was in garage fixing her car starter, never a dull moment. Further questioning she also said it wan't heating the food. Due to being an odd sized built in $$ unit I had to have repaired. I was getting quotes in the $4-500 range for just the magnetron. I was pretty confident the magnetron was the issue and also ordered a new capacitor and diode since I was going to be in there and a lot of money ahead repairing myself. About... Read more
Halogen bulb illuminates your microwave interior for monitoring food while cooking. Replace when burned out or dim. Verify bulb base type for fit.
Followed the instructions found on the web, and replaced the part. Super-easy. Read more
Replacement door latch lever bracket for microwaves. Installs behind the control panel to hold interlock switches. Needed when bracket is cracked or broken.
Ordered new switches (replaced all three- upper and lower door switches and switch monitor- just to make everything new). Received them within 48 hours! You tube video enabled replacement job to be completed by handyman neighbor in 20 minutes (would have been shorter repair time but for my kibitzing). Appliance Parts Pros gets an A+! Will do business with APP on any future appliance repairs! Read more
Traps grease and particles from ventilation air in your microwave. Replace when clogged or damaged for optimal performance. Verify fit with model number.
Took out the old ones and inserted the new ones, extremely easy Read more
Replacement glass turntable tray for microwaves. Rotates during cooking to heat food evenly. Order a new tray if yours is cracked, chipped, or broken.
And continued to crack more with each use. Ordered a new on. Quick chat online with a rep to make sure I had correct part, ordered and it got here 2 days later. Fantastic!! Read more
Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.
Fix a microwave with no power or intermittent shutoffs. This thermostat monitors temperature and protects internal components. DIY repair in 20 minutes.
Replaced the thermostat and it turned on and I have power again. Read more
Replace your cracked, broken, or shattered microwave glass turntable tray. This clear rotating cooking tray installs on the guide roller inside.
Found replacement on AppliancePartsPros.com. Placed order online and tray was delivered 2 days later. Just like new! Read more
Microwave turntable not turning? The turntable motor rotates the glass tray for even heating. Simple DIY repair with basic tools in under an hour.
Unplug your microwave. Took the screws off of the bottom of the unit with it still on the cabinet. The whole bottom panel swung down to expose the turntable motor. I took the power cable loose (just pull it off). It was one screw to take the motor out. Word to the wise: DON'T try to take the plastic coupler off before the motor. Their is a tab that holds it in while the motor is in place. If you pry it up you will break it, trust me. ;) Turn the motor out of its housing and it come right out.... Read more
If your microwave runs but won't heat food or makes grinding noises, the magnetron has likely failed. Moderate DIY repair requiring capacitor discharge.
Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.
We followed the manufacturer's instructions about re-positioning the fan motor and installing the vent damper (easy). We constructed a duct system from the microwave to the outside of the house (challenging). We used 3.25" x 10" metal duct to start the system through the wall behind the microwave, where we added framing to reinforce a cut stud. We ran the duct up a closet wall and through its ceiling into the attic. We had to make an offset duct piece from 3.25" x 10" metal duct to clear a... Read more