Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore Line Line Mover Float Parts

Best Seller
Kenmore Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W11175771

The Water Inlet Valve is an OEM part for Whirlpool dishwashers. It regulates the flow of water into the machine. This valve opens and closes to allow the right amount of water in during various cycles, ensuring dishes are cleaned effectively without wasting water. 

Over time, the water inlet valve can fail due to mineral buildup from hard water, wear and tear from frequent use, or mechanical failure of the valve components. A malfunctioning valve can lead to problems such as insufficient water entering the dishwasher, leading to poorly cleaned dishes, or leaking, which can cause water damage over time.

Symptoms of a bad Water Inlet Valve include:

  • Dishwasher not filling with water
  • Water filling too slowly or overfilling
  • Unusual noises during the fill cycle
  • Leaks around the dishwasher

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You No water.   Gerald A. • Bennington , VT • September 04, 2017

Replaced the water solenoid. Read more

More
$52.31
Compare At:
$63.36
You Save:
$11.05

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10327249

The Water Inlet Valve is an OEM replacement part for Whirlpool dishwashers. The water inlet valve is responsible for regulating the flow of water into the dishwasher. It is connected to the main water supply and opens and closes as needed to allow water to enter the appliance at the appropriate time and in the correct quantity. 

Causes of a bad Water Inlet Valve can include mineral deposits that clog the valve, a failure in the valve's solenoid, or wear and tear over time that affects the valve's ability to open and close properly.

Symptoms of a bad Water Inlet Valve include:

  • Dishwasher not filling with water
  • Water filling too slowly or too quickly
  • Water leaking from the dishwasher
  • Unusual noises during the fill cycle

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Note: The white plug connector can be disconnected to allow for connection of the dishwasher wiring if needed.

This part fixes the following symptoms
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You No water in the dishwasher.   Rohan P. • Troy , OH • January 30, 2022

As mentioned, our Whirlpool Dishwasher would complete the cycle but Tablet pretty much sat in the Soap Dispenser Box nor there was any sign of water inside the Dishwasher. This happened 2 - 3 times. Hence decided to dive into what the fix was. After reviewing a bunch of Youtube Videos, understood first how a typical Dishwasher operates and what are the basic checks it does before water is let inside. So it typically first checks whether Door S/w got activated, followed by Float Switch... Read more

More
$51.30
Compare At:
$61.05
You Save:
$9.75

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Water Inlet Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 154637401

The Water Inlet Valve is an OEM replacement part for Frigidaire washing machines. It is a component responsible for controlling the flow of water into the washing machine tub during the wash and rinse cycles.

Symptoms of a faulty Water Inlet Valve include:

  • No water or insufficient water entering the washing machine tub
  • Washing machine not filling or taking an excessive amount of time to fill
  • Leaks or water dripping from the inlet valve area
  • Unusual noises or vibrations during the fill cycle

Causes of a bad water inlet valve can include normal wear and tear over time, sediment buildup or blockages, electrical malfunctions, or physical damage from water pressure issues or freezing conditions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.

This part fixes the following symptoms
  • Will not fill with water
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Hot water inlet solenoid valve lealing   Virgil H. • Whitehall , NY • December 04, 2015

Obtained part online from Appliance Parts Pros. com... within one or two days received the part... Replacing the defective part is straight forward... The valve is located on the left underside of the unit. Make sure the electrical power is off and the water supply to the unit is closed off. Disconnect the water inlet piping from the valve... in my case separating a 1/2 inch copper union. Remove the electrical quick connector from the solenoid prongs. The red wire is orientated at the top of... Read more

More
$25.70
Compare At:
$36.53
You Save:
$10.83

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Solenoid And Bracket Assembly
Genuine Ge part
By: Ge
Part Number: WD21X10268

The Solenoid and Bracket Assembly is an OEM replacement part for GE dishwashers. This component plays a role in controlling the flow of water during the dishwashing cycles, allowing for proper water distribution and efficient cleaning.

Symptoms that may indicate the need to replace the solenoid and bracket assembly include:

  • Issues with water not filling or draining properly
  • Inconsistent or incomplete water circulation during cycles
  • Visible leaks or water damage around the solenoid area

Causes of a faulty solenoid and bracket assembly can include normal wear and tear over time, electrical malfunctions, mineral buildup or debris obstructing the solenoid, or physical damage to the component.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

This part fixes the following symptoms
  • Will not drain
See more...
Do-It-Yourself Stories from Customers like You Dishwasher would not drain   Larry H. • Navasota , TX • July 18, 2016

Replaced the solenoid and bracket assembly Read more

More
$32.41
Compare At:
$38.63
You Save:
$6.22

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Water Inlet Valve
Genuine Bosch part
By: Bosch
Part Number: 00622058

The Water Inlet Valve is an OEM part for Bosch dishwashers. This component is responsible for controlling the flow of water into the dishwasher. It operates via electrical signals from the dishwasher's control board, opening to allow water to enter during the fill cycle and closing to prevent water from entering during other cycles. 

Causes of a bad Water Inlet Valve include mineral deposits from hard water, which can block the valve and restrict water flow, or electrical failure, which prevents the valve from opening or closing properly. 

Symptoms of a bad Water Inlet Valve include:

  • Dishwasher not filling with water, leading to unwashed dishes.
  • Water leaking from the dishwasher, potentially caused by a valve that doesn't close completely.
  • Overfilling of the dishwasher, which can occur if the valve fails to shut off.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms
  • overflowing
See more...
Do-It-Yourself Stories from Customers like You Bosch dishwasher: water inlet valve cracked.   Roger M. • Locust Valley , NY • June 12, 2020

After first thinking I had a leak under my sink (dripping into my workshop in the basement), I quickly traced the source back to my Bosch dishwasher. I removed the bottom kick plate (phillips screwdriver) and could see a continuous drip from the Water Inlet Valve. Easy to see because the Water Inlet Valve is mounted in front. I shut off the power to the dishwasher at my breaker box and turned off the water to the dishwasher. First, I easily disconnected the power clip at the back of the Water... Read more

More
$53.95
Compare At:
$64.74
You Save:
$10.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Water Inlet Valve
Genuine Bosch part
By: Bosch
Part Number: 00425458

The Water Inlet Valve is an OEM part for Bosch dishwashers. This component is responsible for controlling the flow of water into the dishwasher. It operates via electrical signals from the dishwasher's control board, opening to allow water to enter during the filling phase and closing to halt water flow once the correct level is achieved.  

Causes for replacement can include wear and tear over time, mineral deposits from hard water that obstruct the valve, or electrical failures that prevent the valve from opening or closing properly.  

Symptoms of a bad Water Inlet Valve include:

  • Insufficient water filling the dishwasher, leading to poor cleaning results.
  • No water entering the dishwasher, resulting in dry cycles.
  • Water leaking from the valve, which could indicate a crack or failure in the valve mechanism.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This part fixes the following symptoms
  • overflowing
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Internal water leak on a bosch shu5316 uc/06 dishwasher   David B. • Aspinwall , PA • March 13, 2015

Using instructions I obtained over the internet, I first removed the DW's bottom cover panels so I could look inside the DW (with a flashlight) while it was running. I had to put their dishwasher through several wash cycles before I could pinpoint the location of the leak. (The water appeared to be coming from above on the left side of the DW, near the top, rear of the DW's blue "Pressure Chamber." Thinking that the problem likely lay in either a malfunctioning Pressure Chamber or in a... Read more

More
$67.35
Compare At:
$80.15
You Save:
$12.80

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Fill Valve Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10158389

The Fill Valve Assembly is an OEM part for Whirlpool dishwashers. It controls the flow of water into the dishwasher, ensuring that the correct amount of water is supplied for each wash cycle. 

Causes of a bad fill valve assembly often include mineral deposits from hard water, which can obstruct the valve, and normal wear and tear that affects its functionality. Faulty electrical connections or a degraded solenoid can also prevent the valve from opening or closing properly.

Symptoms of a malfunctioning fill valve assembly include:

  • The dishwasher not filling with water.
  • Water filling too slowly or continuously running.
  • Unusual noises during the fill cycle, such as humming or buzzing.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not fill with water
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Kenmore dishwasher would start but would not fill with water   Gene M. • Glendale , AZ • November 30, 2015

Recently my Kenmore dishwasher would start but would not fill with water. A quick test of the float switch reflected proper operation, AND voltage was being delivered TO the contact on the water inlet valve. I then removed power and checked for continuity on the contacts. This read “infinity” (Open circuit) which indicated a break in the coil inside the valve’s solenoid. As such the valve would not open to allow water to flow. I ordered the replacement water inlet valve from... Read more

More
$52.28
Compare At:
$62.21
You Save:
$9.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Solenoid Armature And Linkage
Genuine Ge part
By: Ge
Part Number: WD1X1316

The Solenoid Armature and Linkage is an OEM replacement part for GE dishwashers. It is responsible for controlling the dishwasher's draining process by operating the drain valve, which regulates the flow of water out of the dishwasher during the drain cycle.

Symptoms of a bad solenoid armature and linkage include:

  • Dishwasher not filling with water or filling improperly
  • Water leaks from the inlet valve area
  • Dishwasher not advancing to the next cycle due to water flow issues
  • Error codes or indicators related to water inlet problems

Causes of a bad solenoid armature and linkage can include mineral buildup or debris obstructing the valve, electrical malfunctions in the solenoid coil, or mechanical wear and tear of the linkage components.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

Do-It-Yourself Stories from Customers like You Dishwasher wasn't draining   Grace S. • Hartford , CT • August 02, 2019

About a year ago my dishwasher during a cycle was emitting a horrible plastic burning smell. We stopped it mid-cycle, cleaned it out and tried to run a few more cycles after that and realized it wouldn't drain so it sat in my kitchen broken for a year. I finally got so fed up with washing dishes by hand that I took the whole dishwasher apart. Confirmed there were no blockages in any of the hoses etc. when it still didn't work I googled the problem, found this website and found that it must be... Read more

More
$31.41
Compare At:
$37.06
You Save:
$5.65

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Frigidaire Dishwasher Inlet Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 807047901

The Inlet Valve is an OEM part for Frigidaire dishwashers. This valve is essential for controlling the flow of water into the dishwasher, ensuring the appliance receives the correct amount of water during the wash and rinse cycles. The inlet valve operates by opening and closing in response to electrical signals from the dishwasher's control board, allowing water to fill the dishwasher tub at the appropriate times.

Symptoms of a failing Inlet Valve include:

  • The dishwasher not filling with water at the start of a cycle
  • Water entering the dishwasher slowly or inconsistently
  • The dishwasher overfilling or leaking
  • Unusual noises such as buzzing or humming during the filling stage
  • Water remaining in the tub after the cycle is complete

Causes of a bad inlet valve can include mineral buildup from hard water, which can clog the valve, wear and tear on the valve components over time, or electrical issues that prevent the solenoid from functioning correctly.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dishwasher would not fill   Eric D. • Indianapolis , IN • March 02, 2020

Replacing the inlet valve solved the problem. The old valve was somehow clogged with white sediment. I probably could have taken it off and cleaned it out if I'd known, but replacing the valve was much easier. Took about half an hour to repair. Video walk through was extremely helpful. Great to have a working dishwasher again! Read more

More
$55.24
Compare At:
$65.74
You Save:
$10.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Check Valve
Genuine Bosch part
By: Bosch
Part Number: 00165262

The Check Valve is an OEM part for Bosch dishwashers. It prevents the backflow of water into the dishwasher after it has been drained, ensuring that dirty water does not re-enter the appliance and contaminate clean dishes.

Causes of a bad check valve can include blockages from debris or food particles, wear and tear over time, or damage from improper installation or handling. These issues can impair the valve's ability to effectively prevent backflow.

Symptoms of a bad check valve include:

  • Water not draining properly from the dishwasher
  • Dirty water pooling at the bottom of the dishwasher
  • Foul odors coming from the dishwasher
  • Residual water remaining in the tub after the cycle ends

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Supply water weeping by the incoming water main valve over flow out of the dishwasher   Dave S. • Omaha , NE • December 18, 2017

Removed water out of basin, down to the last inch.. Watched water rise slowly, and felt temperature, warm. This told me it was supply water. Ordered replacement part, two days just as mentioned, Removed as per video. Also choose to replace the waste line check valve, to affordable not too. Working great, except the wood floor not so happy with. One thing at a time. Thanks Read more

More
$17.22
Compare At:
$20.49
You Save:
$3.27

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W10648041

The Dishwasher Water Inlet Valve is an OEM part for Whirlpool dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle. Redesigned: Valve mounts directly on the frame and no longer includes or requires the mounting bracket.

Symptoms of a bad Dishwasher Water Inlet Valve include:

  • Inadequate water filling the dishwasher.
  • Overfilling, which can cause leaks and potential water damage.
  • Unusual noises coming from the valve area.
  • The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Dishes weren't clean, soap wasn't dissolving, not spraying   Timothy B. • Williamsville , NY • February 16, 2019

Cycle would complete but dishes weren't clean (not even really wet) and soap wasn't dissolving. Could hear fill at start but maybe not spraying or filling again in cycle. Thought it was the control board, but actually this was not the error. Replaced the control board and same problem arose, only new control board version actually stopped cycle with message that dishwasher couldn't fill. Looking underneath the pump had somehow become dislodged from the bottom of dishwasher and was laying on... Read more

More
$50.31
Compare At:
$60.89
You Save:
$10.58

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Piston & Nut Assembly
Genuine Ge part
By: Ge
Part Number: WD24X10018

The Piston & Nut Assembly is an OEM part for GE dishwashers. It plays a critical role in the dishwasher’s water management system, helping to control water flow and ensuring proper drainage during the wash cycle.

You should replace this piston & nut assembly if it becomes worn out or damaged. Causes of a bad piston & nut assembly can include mineral buildup from hard water, general wear and tear from regular use, or physical damage due to debris or foreign objects in the dishwasher.

Symptoms of a bad piston & nut assembly include:

  • Water not draining properly from the dishwasher
  • Puddles of water at the bottom of the dishwasher after a cycle
  • Unusual noises during the drain cycle
  • Incomplete cleaning of dishes due to improper water flow

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Will not drain
See more...
Do-It-Yourself Stories from Customers like You Water remained in the bottom of the dishwasher after all cycles were complete.   Fred E. • Saratoga Springs , NY • March 21, 2014

It is very simple to fix. All the blogs recommend replacement of this part but do not explain why. This is a normally open check valve that permits the water from inside the dishwasher to drain out, either once it gets too high or just general splash. When the machine drains the pump comes on and the check valve closes. If the check valve is damaged or worn (like mine was) some of the water can pump back into the machine. So really, the problem is not that the machine will not drain but... Read more

More
$16.95
Compare At:
$28.07
You Save:
$11.12

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Inlet Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195536

The Inlet Assembly is an OEM part for Whirlpool dishwashers. It is responsible for controlling the flow of water into the dishwasher during the wash cycle. This assembly ensures that the correct amount of water enters the dishwasher to clean dishes effectively.

You should replace the inlet assembly if it becomes faulty. Causes of a bad inlet assembly can include wear and tear from regular use, blockages from debris or mineral buildup, or electrical issues. A malfunctioning inlet assembly can lead to inadequate water flow, which affects the dishwasher’s cleaning performance.

Symptoms of a bad inlet assembly include:

  • The dishwasher not filling with water or filling slowly
  • Water leaks around the inlet area
  • Error codes related to water intake issues
  • The dishwasher stopping mid-cycle or not starting

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Jenn airJDB8000AWS3 dishwasher would not drain   Lynden B. • Benicia , CA • December 17, 2019

Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to... Read more

More
$61.95
Compare At:
$73.72
You Save:
$11.77

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Washer Water Inlet Valve
Genuine Samsung part
By: Samsung
Part Number: DC62-30314K

The Washer Water Inlet Valve is essential for maintaining a steady and reliable water supply to your Samsung washing machine. This genuine OEM part ensures compatibility with a wide range of Samsung washer models, providing a perfect fit and seamless integration. Crafted from high-quality materials, the valve effectively controls the water flow, preventing leaks and ensuring that your washer operates efficiently during each cycle. Installing the Washer Water Inlet Valve can resolve issues such as inadequate water filling or inconsistent water levels, restoring your applianceGÇÖs optimal performance. Its durable design not only enhances the longevity of your washer but also minimizes the need for frequent repairs. Choosing this genuine OEM part guarantees that you receive a product that meets SamsungGÇÖs exacting standards, offering peace of mind and dependable functionality. Upgrade your washer with the Washer Water Inlet Valve to enjoy efficient washing cycles and extend the life of your appliance.

Do-It-Yourself Stories from Customers like You Samsung washer wasn't getting hot water anymore   Scott S. • Palo Alto , CA • April 25, 2014

I found a youtube video about replacing the hot water valve in a Samsung washer. It looked pretty easy. I had been very satisfied with an earlier order from AppliancePartsPros.com, so I ordered this part on Sunday after 9PM, standard delivery, hoping to get the part by the end of the week. I was flabbergasted to receive the part TUESDAY MORNING! Wow! I followed the instructions in the youtube video exactly. It took around 15 minutes, because I was being very careful not to drop screws in... Read more

More
$90.63
Compare At:
$107.85
You Save:
$17.22

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Water Inlet Valve Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531669

The Water Inlet Valve Assembly is an OEM part for Whirlpool dishwashers. This valve assembly is crucial for regulating the flow of water into the dishwasher during the wash and rinse cycles.

Common causes include mineral buildup from hard water, wear and tear from frequent use, or electrical issues affecting the valve's solenoid. A malfunctioning valve can lead to improper water levels or no water entering the dishwasher at all.

Symptoms of a bad water inlet valve assembly include:

  • The dishwasher not filling with water
  • Low water levels during cycles
  • Water leaking from the valve
  • The dishwasher not cleaning dishes properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Dishwasher was not filling up to normal level, hardly any water was coming in   James V. • Annandale , VA • August 31, 2021

First I cleared the food chopper area. There were things there, bits of plastic for instance, but it wasn't the reason for the dishes not getting sprayed off. The dishwasher continued to only partially fill and not circulate the water. I started the dishwasher, let the pump start and then opened the door and filled up the dishwasher manually. It sprayed water as it should, cleaning the top rack quite well. I figured the issue was not the float switch, since some water was coming in. So I... Read more

More
$66.95
Compare At:
$80.34
You Save:
$13.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Water Valve Assembly
Genuine Bosch part
By: Bosch
Part Number: 00607335

The Water Valve Assembly is an OEM part for Bosch dishwashers. This assembly controls the flow of water into the dishwasher, ensuring that the correct amount of water is used during the wash cycle for optimal cleaning performance.

Causes of a bad water valve assembly can include mineral deposits from hard water, wear and tear over time, or electrical issues that prevent the valve from opening or closing properly. These issues can lead to improper water flow or leaks.

Symptoms of a bad water valve assembly include:

  • Dishwasher not filling with water
  • Insufficient water during the wash cycle
  • Water leaks from the valve area
  • Unusual noises when the valve is operating

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This part fixes the following symptoms
  • overflowing
See more...
Do-It-Yourself Stories from Customers like You Bosch dishwasher flooding after freeze.   Harold R. • Leander , TX • March 02, 2021

This was not my first rodeo have repaired our appliances and those of our daughters for years, have ordered parts from this site several times. We had a cold spell in Texas, as you may have heard. We weathered it okay but left the dishwasher closed on one of the colder nights, woke up to water on the floor in the kitchen. Turned off the supply line, shut off the dishwasher power, bailed out the bottom, and mopped up. Had a fair idea of what the cause was, checked a few websites, watched some... Read more

More
$68.95
Compare At:
$82.05
You Save:
$13.10

IN STOCK
Ships Today Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store