Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Oven Temperature Sensor Assembly is an OEM replacement part for GE electric wall ovens. It is responsible for accurately reading the oven's internal temperature to provide precise temperature control and safe operation. Consistent and precise temperature readings are necessary for repeatable cooking results.
Symptoms of a bad temperature sensor include:
Causes of a faulty sensor can be due to failures over extended usage, exposure to high heat cycles, or impedance changes due to dirt or mineral deposits. Precise temperature readings allow for confident cooking.
This OEM GE replacement sensor is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models.
My mother's GE range was not coming up to full heat (very far from it), and I was hearing a lot of relay-clicking coming from the control board. The heating elements seemed good. I suspected the control board was faulty, but there was a chance that it might be the (*much* less expensive) temperature sensor, so I ordered both from AppliancePartsPros.com (which got the parts to me very fast) so I could try the T-sensor first. After removing the doors and the back panel of the oven, and taking out... Read more
Cerama Bryte Cooktop Cleaner is a special cleaner designed specifically for ceramic glass and smooth-top cooking surfaces. It easily removes cooked-on foods, spills, or grease while leaving your cooktop looking like new. This product contains no abrasives or harsh chemicals, so it won’t scratch or damage your delicate cooktop surface.
To use the cleaner effectively, all you need to do is spray it onto the surface and then scrub it with a clean damp cloth. Use circular motions for best results. The product can also be used to remove baked-on foods from grates and drip pans on your stovetop. For tougher stains, let the cleaner sit for a few minutes before wiping it away.
VERY simple fix- you do not even have to pull the range out.. I ordered a new cooktop from Appliance parts Pros. The customer sales rep Alphonso was great and walked me through the general process. I could find no explicit instructions for the repair but I muddled my way through. The fix is simple on Kitchenaid/Whirpool slide in ranges. 1. Open the oven door and remove the two phillips head screws directly below the control panel that hold the panel down.2. Lift the control panel upward and... Read more
The Element Haliant 12 Inch is an OEM part for GE ranges. This radiant heating element is designed to provide even and consistent heat for cooking on your stovetop. It ensures efficient transfer of heat to your cookware, allowing for precise temperature control.
Over time, heating elements can wear out or become damaged due to repeated use, exposure to high temperatures, or accidental impact. If the element becomes faulty, it can result in uneven heating or failure to heat up entirely.
Symptoms of a bad element include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Two screws in the front, lifted top, removed old burner, replaced with new one. The trickiest part was getting the wires connections loose from the old burner. Read more
The Element Radiant 9 Dual is an OEM part for GE cooktops and ranges. It provides the heating surface for cooking and is designed to offer two different heating zones, allowing for versatile temperature control depending on the size of the cookware.
Causes of a bad element radiant can include burnouts from excessive use, damage due to spills or impacts, and electrical issues. A faulty heating element can result in uneven cooking or the element failing to heat up at all.
Symptoms of a bad Element Radiant 9 Dual include:
Replace 9" dual burner. Read more
The Oven Door Gasket is an OEM part for GE ranges. This seal prevents heat from escaping the oven cavity when baking or broiling. The gasket helps maintain temperatures for more efficient cooking and reliable operation. The gasket measures approximately 84" long.
Causes of a bad gasket can include deterioration over prolonged high-heat use, damage due to abrasion or impact, or warping from moisture exposure over time.
Symptoms of a bad oven door gasket include:
This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
I removed the door, mostly so we could really clean the all the nooks and cranny's of the stove, and make the handle and gasket replacement easier. Attaching the new handle was not difficult, but did require some minor door dis-assembly. Removing the old gasket and putting on the new gasket was a breeze. The hardest part of the job was putting the door back onto the stove, but we got it done and the stove looks and works great. Read more
The Window Pack Assembly is an OEM part for GE ranges and ovens. It serves as the inner glass component of the oven door, allowing you to observe the cooking process while providing insulation and protection. It consists of an inner glass panel, frame, and seals to ensure proper insulation and prevent heat loss.
Causes of a faulty window pack assembly can include accidental impact, cracks, or damage to the inner glass panel or frame. These factors can compromise the visibility, insulation, and safety of the oven.
Symptoms of a bad window pack assembly may include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Replaced the glass assembly with parts ordered from appliancepartspros.com. Read more
These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.
This part fixes the following symptoms:
The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more
The Bottom Trim Channel is an OEM part for GE electric ranges. As an essential cosmetic component, it works to cover and seamlessly conceal the area along the bottom perimeter of the range.
Causes of a faulty trim channel can include damage from impact or abrasion, degradation of material finishes from repeated cleaning, or loose fittings from normal stresses of use over time.
Symptoms include:
Color: White
This GE replacement restores a sleek, professional look while protecting internal components from spills and debris ingress. Compatible with Hotpoint, RCA, and select Kenmore models as well, it prevents future repairs from minor aesthetic issues. Keep your range looking its best!
With the help of Ms.Kelly Hunt, AppliancePartsPros.com, I was able to locate the correct parts. It took approx. 30 minutes to remove the door and replace the shattered glass and bottom door trim. I wouldn`t hesitate to use this service for future use.The staff is friendly, helpful , knowledgeable and delivery is very fast. Thank you Martin Dobbins Read more
The Surface Burner Switch is an OEM part for GE electric ranges. This switch controls the heat level of the surface burner, allowing for precise temperature adjustments during cooking.
Common causes of failure include electrical issues, wear from frequent use, or damage from overheating. A malfunctioning switch can prevent the burner from operating correctly, affecting your ability to cook efficiently.
Symptoms of a bad Surface Burner Switch include:
Switches needed to be replaced. Make note of where each screw comes from. They were not all the same. To remove the front panel and get to the switches, you have to partially remove the cook top. Removed 5 screws from the back to release the cooktop. Slid the cooktop back far enough to expose screws holding on the front panel. Removed 4 screws from the top and 6-8 from the bottom (opened the oven door to get to the bottom screws). Removed screws from the front panel holding the switch in... Read more
The Probe Thermistor is an OEM replacement part for GE wall ovens and ranges. Located inside the oven cavity, this temperature-sensitive probe precisely monitors interior heat to safeguard against overcooking. Causes of a faulty thermistor involve exposure to excessive cooking temperatures, moisture infiltration from spills or steam, or basic failure due to old age. Symptoms of an inadequate probe thermistor include:
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I looked diligently for this probe for many months and to no avail. So desperate to find it , I Goggled and found this provider for the probe. I was amazed at the timing of the receipt of the item. I received an email within hours that it had been shipped the same day and arrived at my home within less than 48 hours! The price was great and the item was easy to locate on the site.. Thank you for your attention and customer service. I will use these folks again! Read more
The Terminal Block Assembly is an OEM replacement part for GE electric stoves. It acts as the central wiring connection hub, routing power to critical heating components such as the oven bake/broil elements and stovetop burners.
Symptoms of a bad terminal block include:
Causes stem from normal wear over time, as vibration and heat cycling can cause cracks or corrosion in the block's electrical connections.
This OEM GE part is compatible with Hotpoint, RCA, and some Kenmore electric stove models.
Removed damage terminal block ordered new block on line. when I received new block installed it stove works fine easy to replace. If I had not been home at the time when this happen it may had cause a big house fire. Read more
The Rear Door Support is an OEM replacement part for GE ranges. Located at the base of the range, this bracket provides weight-bearing support for the lower oven drawer. It facilitates smooth extension and retraction of the drawer. Causes of faulty support can include cracks or fractures developing over extended use, worn joints unable to sustain drawer weight, or misalignment from repeated opening/closing stress. Symptoms of a bad support include:
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges.
So, in the process of a kitchen remodel my GC managed to lose *both* of the rear plastic supports for my GE stove! The drawer was totally unsupported without the brackets. I managed to find them on your site and see that they were a new and better design (rear mount with screw vs side mount and no firm mounting). The install was a snap and the brackets work excellent. I wish I knew that there was a new design years ago or I would have bought them much sooner! Thanks!! Read more
The Surface Element Control is an OEM part for GE ranges. It regulates the heat output of the surface elements on the cooktop, allowing users to adjust the cooking temperature precisely.
Over time, the surface element control can wear out due to regular use, electrical issues, or exposure to high temperatures. If it fails, it can lead to inconsistent heating or no heat at all, affecting your cooking performance.
Symptoms of a bad surface element control include:
First I took the back top panel off the stove. The crackling was coming from the control element. I went directly to AppliancePartsPros.com diagram to see what part I needed. Ordered and the part was delivered within 72 hours. The installation was so easy. Pull a couple wire off and reinstall them on the new control. No more crackling. A repair that would have cost me at least $100.00 or more, done by me for +/- $25.00. I love this site, I love the information you offer for... Read more
The Inner Oven door glass is an OEM replacement part for GE ranges. Located inside the oven door cavity behind an outer steel panel, the inner glass allows viewing food without opening the door for temperature checks. As an insulating barrier, it separates intense oven heat from exterior door surfaces.
Causes of a bad inner door glass can include cracks or chips from heavy impacts over time, scratches clouding visibility, or breaks compromising insulation integrity.
Symptoms of a bad inner door glass include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore wall oven models.
I ordered the part from APP, removed the door, removed the inside panel and replaced the glass. Hardest part was figuring out exactly which screws to remove to open the door. Read more
The 6" Radiant Element In is an OEM replacement part for GE electric ranges. This element provides reliable and even heating across the cooktop surface to heat pans consistently.
Causes of a failing element can include wear from extended everyday use, buildup of carbon residue on the coils inhibiting heat transfer, or physical damage such as cracks in coils.
This OEM GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore electric ranges.
This repair was on a GE glass Cooktop range. This range has two indicator lights, a Burner On light, and a Hot Cooktop Light. The problem I was having was, the Hot Cooktop stayed on all the time (24x7), even when the cooktop surface had been off for hours and was cold. YouTubes that I viewed were all misleading on this symptom. They all pointed to the switch, which is the fix for the Burner Light staying on, not the Hot Cooktop Light staying on. I figured it out by going to the schematic.... Read more
The Infinite Control Switch is an OEM part for GE ranges. This part controls the temperature of the surface burners by regulating the power sent to the heating elements, allowing for precise heat adjustments during cooking.
Causes of a bad infinite control switch can include electrical issues such as short circuits, wear and tear from regular use, or internal mechanical failures.
Symptoms of a bad infinite control switch include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I first checked a repair video and found the procedure was a 10 minute job. I then went to the website, put in my stove model number and searched for the switch. While I was looking I was offered a chat session with one of their experts. I am glad that I accepted. The switch I was looking at was not the right switch for the job. My expert verified my model number and the switch that need to be replaced. After a couple of minutes, she came back with the right part and placed the order for... Read more