Wap20160sg Parts

The Drain Pump is an OEM part for Bosch washing machines. It is responsible for removing water from the washer drum during the drain cycle, ensuring that the washing process completes efficiently. The pump forces the water out through the drain hose, preventing water from pooling in the drum.  The bushings and screws is sold seperately.  The part number for the Bushings and Screws for this pump is Bosch OEM 00425075. 

Causes of a bad drain pump can include blockages from debris, wear and tear from regular use, or electrical issues.

Symptoms of a bad washer drain pump include:

• The washer not draining water
• Unusual noises during the drain cycle
• Error codes related to drainage issues on the washer’s display
• Water left in the drum after the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Hinge is an OEM component specifically designed for Bosch front-loading washers. Comprised of precision-engineered washers and backing plates, it secures the tub and door connection for smooth, dependable operation. The hinge washer allows natural gliding movement without door alignment or cushioning issues.  

Causes of failure include wear from years of intermittent friction between heavy-moving components. Physical damage such as cracks around riveted fasteners weaken structural integrity as well over time.

Symptoms include:  

• Noisy or grinding sounds emanating from hinges during use
• Misaligned or leaning door unable to fully close/seal 
• Loose door requiring adjustment more often than expected
• Possible door separation calling for hinge replacement

Replacing with this genuine Bosch hinge washer restores balanced operation. Compatible with some Miele and Asko front-loaders also, smooth controlled movement provides consistent washing relief with OEM replacement.
 

The Carbon Brush is an OEM part for Bosch washing machines. It plays a crucial role in conducting electrical current between the stationary and moving parts of the motor, enabling the motor to run efficiently. This component ensures proper motor function, which is essential for the washer's operation.

Causes of a bad carbon brush can include normal wear and tear due to regular use, dirt and debris causing the brushes to wear out faster, or improper maintenance. As the brushes wear down, they become less effective at conducting electricity, which can lead to motor issues.

Symptoms of a bad carbon brush include:

• The washing machine motor not starting
• Sparking or unusual noises from the motor area
• The washer running intermittently or losing power during cycles
• Reduced washing performance or the drum not spinning properly

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Hot Water Inlet Hose is an OEM replacement part for Bosch washers. It serves as a flexible supply line that delivers hot water from an external water heating hot water heater directly to the washer. This hose plays a key role in optimizing wash performance through consistent delivery of hot water for optimal cleaning and sanitization. 

Causes of a bad hot water inlet hose can include wear and tear over time, repetitive flexing weakening the hose material, mineral buildup restricting flow, or damage due to sharp edges or crushing forces.

Symptoms of a bad hot water inlet hose include: 

• Loss or reduction of hot water during wash cycles
• Decreased cleaning ability from insufficient water heating 
• Visible kinks, cracks, or splits along the hose body
• Leaks or drips at hose connections under the washer

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Fastening Ring is an OEM replacement part for Bosch washers. This part is responsible for securely fastening the boot seal to the washer's drum, ensuring a watertight seal and preventing leaks during the washing cycle.

A bad fastening ring can occur due to wear and tear, damage from foreign objects, or improper installation. Signs of a faulty fastening ring include water leaks around the washer's door or visible damage to the boot seal.

Symptoms of a bad fastening ring include:

• Water leaks around the washer's door
• Excessive noise or vibration 
• Visible damage or deformation of the ring

Replace your worn-out or damaged fastening ring with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Shock Absorber is an OEM part for Bosch washing machines. The shock absorber reduces vibrations during spin cycles to minimize component and machine wear.

The shock absorber is designed to cushion movements from unbalanced loads or rough spins. It absorbs shocks to provide a stable operation and protect delicate parts.

Causes of a bad shock absorber can include damage from overloaded or out-of-balance loads over time. Deterioration may arise from long-term usage stresses and environmental exposures like chemical spills.

Symptoms of a bad shock absorber include:

• Excessive shaking and noise during spin
• Gradual loosening of the machine's mounting fixtures
• Deterioration that leads to premature component failures

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.

Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.

Symptoms of a bad washer filter-fluff include:

• Slow or incomplete draining of the washing machine
• Excessive lint on clothes after washing
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models. 

This bearing set replaces the slide bearings in the dishwasher rack rails. It restores smooth, even rack movement and helps keep the rack aligned so loading and unloading is easier and the rack stays securely on the tracks. What it does:

• Guides and supports the rack as it slides on the rails
• Reduces friction for smoother, quieter rack travel
• Helps maintain proper rack alignment to prevent tilting or binding
• Common symptoms: rack is hard to slide, feels rough, pops off rails, or bearings are cracked/missing

• One manufacturer-packaged bearing set

• Disconnect power and water supply before servicing
• Pull the rack out; remove rail end caps/stops per your model's design
• Note orientation; remove worn bearings and snap the new set into the rail channels
• Reinstall end caps and verify the rack moves smoothly before running a cycle

The Valve is an OEM replacement part for Bosch clothes washers. It regulates water intake, determining volumes for specific cycles. Balanced flow conserves resources without sacrificing clean performance. 

Causes of a bad valve can include mineral deposits clogging internal pathways over time. Constant opening/closing stresses rubber seals and disrupts precision.

Symptoms of a bad valve include:

• Inconsistent or insufficient water levels between loads   
• Washer fills on small loads wasting water 
• Extended cycle times as valve struggles to meter H2O
• Leaks that seep from the valve body into internal components

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement foot supports and levels your appliance so it sits steady and operates smoothly. Replace a worn or missing foot to restore proper height, reduce wobble, and help protect surrounding surfaces.

• Supports the base/frame to maintain proper height and alignment
• Provides leveling adjustment so the unit remains stable
• Helps reduce rocking, vibration, and rattling during operation
• Replace if the original foot is cracked, stripped, missing, or won't adjust

• Disconnect power; shut off water or gas supplies if applicable
• Carefully tilt or raise the unit to access the foot location
• Remove the damaged foot and install the new one per design
• Level the appliance front-to-back and side-to-side; verify stability before use

This valve magnet is the electromagnetic coil that actuates the appliance's valve, allowing the control to start and stop flow as needed. Replacing a weak or open coil restores dependable valve operation and proper cycle performance.

• Converts electrical signals into magnetic force to move the valve plunger
• Opens and closes the mated valve on command to regulate flow during cycles
• Failure symptoms include no flow, continuous flow, intermittent operation, or related error codes
• A weakened coil can cause the valve to hum without actuating

• Disconnect power and shut off any supply before servicing
• Access the valve and note wire positions for correct reassembly
• Slide the new coil fully onto the valve body; ensure proper orientation and seating
• Reconnect wiring, restore supply, and test for correct operation and leaks

This replacement window is the clear panel that installs in the appliance's front/door to restore safe visibility and a complete barrier. Replacing a damaged window helps protect users and maintain proper appliance performance.

• Provides a viewing area while keeping the interior contained
• Helps the door/front close and seal properly when intact
• Replaces cracked, chipped, hazy, or missing window panels
• Resolves sharp edges, rattling, or loss of heat/air through the opening

• Disconnect power and allow the unit to cool before service
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Reuse existing screws, trim, and gasket/seal as required
• Do not overtighten fasteners; verify door alignment and seal after installation

This OEM water hose routes and contains water within your appliance's plumbing path. Replacing a worn or damaged hose helps restore a watertight connection and prevents leaks, odors, and water-related faults. What it does:

• Carries water between internal components
• Maintains a sealed flow path to prevent drips and leaks
• Helps proper circulation and drainage by avoiding kinks or collapses
• Common failure signs include visible cracks, brittleness, leaks, or moisture under the unit

• 1 hose

• Disconnect power and turn off the water supply before servicing
• Protect flooring; pull the appliance forward for access
• Note hose routing and clamp positions; take photos for reference
• Inspect/replace clamps or O-rings if worn; verify no leaks on test cycle

This inner oven door glass replaces a cracked, fogged or damaged viewing window so you can safely check cooking progress without opening the door. Fits the oven door assembly; restores visibility and helps maintain proper oven seal. What it does:

• Provides the transparent barrier in the oven door for viewing food while cooking
• Replaces cracked, scratched or clouded glass that impairs visibility
• Helps maintain the door's insulating barrier to support consistent oven temperatures
• Reduces risk of heat loss from damaged or missing glass

• One inner oven door glass panel as pictured

• For safety, disconnect power to the appliance before removing the door or glass
• Glass may be sharp; wear cut-resistant gloves and eye protection during removal and installation
• Follow the oven manufacturer's door-disassembly steps—do not force or bend door components

This hose inlet connects the household water line to the appliance's fill system, restoring proper water delivery for normal cycles. It's a direct replacement for damaged, cracked, or leaking inlet hose assemblies. What it does

• Channels incoming water from the supply into the appliance's fill system.
• Prevents leaks at the supply connection when intact and properly installed.
• Commonly replaces hoses that are cracked, split, or worn and causing visible leaks.
• Can resolve issues with poor or no water fill when the hose is blocked or damaged.

• Disconnect power and shut off the water supply before starting.
• Inspect and replace any worn O-rings, ferrules, or clamps as needed.
• Hand-tighten fittings, then secure with recommended clamps; avoid overtightening.