Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Temperature Sensor is an OEM replacement part for GE refrigerators, designed to accurately monitor and relay the temperature inside the refrigerator and freezer compartments to the electronic control board. By detecting the slightest changes in internal temperature, the sensor allows the control board to make real-time adjustments to the cooling system, activating the compressor and fans as needed to maintain optimal conditions for food preservation.
Over time, the temperature sensor can fail due to electrical issues, exposure to moisture, or general wear and tear. A malfunctioning sensor can lead to improper temperature regulation, affecting the efficiency of the refrigerator and the freshness of stored food.
Symptoms of a bad Temperature Sensor include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over... Read more
The Defrost Thermostat is an OEM replacement part designed for use in GE refrigerators. This component acts as a safety device in the refrigerator's defrost system, preventing the freezer from overheating during the defrost cycle. It works by monitoring the temperature of the evaporator coil and turning off the defrost heater when the coil gets warm enough, thus safeguarding the freezer from getting too hot.
Causes of a bad defrost thermostat can include corrosion, a blown fuse inside the thermostat, or wear and tear over time, which can lead to malfunctioning of the refrigerator's defrost system.
Symptoms of a bad Defrost Thermostat include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The Ice Dispenser Bucket Auger is an OEM replacement part for GE refrigerators. This component is responsible for pushing or "augering" the ice cubes from the ice bucket or bin towards the dispenser chute for easy access.
Symptoms of a failing ice dispenser bucket auger include:
Causes of needing to replace the ice dispenser bucket auger can include normal wear over time, damage from impact or foreign objects, or issues with the auger motor that drives its rotation.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
This was a little more involved than I originally thought, but after watching the video on the site it wasn't so bad. They walk you through each step verbally and visibly so you can see exactly what to do. Replacing the auger took around 20 minutes, and only that long because the screw holding the ice shield was a bit tough to turn. I just applied gentle pressure and turned slowly until it became loose. The rest was fairly easy, but I did get a small cut from the ice crusher blades. Nothing... Read more
The Vegetable Pan is an OEM part for GE refrigerators. This part serves as a dedicated storage solution for fruits and vegetables within the refrigerator, helping to maintain optimal humidity levels and ensuring that produce stays fresh longer.
Over time, the vegetable pan can experience wear or damage from frequent use, accidental impacts, or overloading. This can lead to cracks, warps, or breaks in the pan, which might affect its ability to properly store produce or fit correctly within the refrigerator.
Symptoms of a bad Vegetable Pan include:
Changed out the valve and cleaned the lines out Read more
The Ice Door Assembly is an OEM part for GE refrigerators. It is integral to the ice dispenser system, controlling access to the ice chute. This component ensures the efficient delivery of ice cubes or crushed ice when activated and seals off the chute when not in use to maintain the freezer's temperature and prevent frost buildup.
Symptoms of a bad Ice Door Assembly include:
Causes of a bad Ice Door Assembly can include mechanical wear from frequent use, failure of the spring mechanism or solenoid that operates the door, or damage to the sealing surfaces that leads to air leaks.
My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more
The Ice Dispenser Solenoid is an OEM replacement part for GE refrigerators. It is a crucial component that controls the flow of ice from the ice maker to the dispenser chute.
Symptoms of a bad ice dispenser solenoid include:
Causes of a bad solenoid can include electrical malfunctions, physical obstructions preventing proper operation, or simply wear and tear over time.
The Slide Assembly RH is an OEM replacement part for GE side-by-side refrigerators. As a replaceable sub-assembly, it restores smooth extension of plastic vegetable/multi-purpose slides on the right interior. The slide measures approximately 16 inches.
Symptoms of a bad slide assembly include:
Causes stem from extended use gradually degrading nylon rollers and wear strips through inevitable friction. Exposure to excessive weights above slide limits may also bend or warp steel support rails quicker.
This genuine GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.
Although the web ordering process was clear, I needed some "personal contact" via customer service. It took very little time to assure me the the parts were the correct ones and the video was easy to follow. When the parts arrived in 2 business days, it took only 30 mins. to complete the replacement of the slides. The video was a great way to assure there was no wasted time or effort. Read more
This slide rail is an OEM replacement part for GE refrigerators. The slide rail measures 1.25 inches in height, 2 inches in width, and 16 inches in depth. This durable and reliable slide rail ensures smooth and effortless drawer operation.
Causes of failure involve repeated impact stresses absorbing the weight of the heavy door opening and closing potentially thousands of daily times over 10-20 years.
Symptoms of a faulty slide assembly include:
This OEM replacement part is also compatible with Hotpoint and RCA electric ranges as well.
NOTE: For the right-hand side order WR72X240. For the slide bearing order WR1X2048.
The new slides fit perfectly. One thing to mention is that the slide rails come with the slide bearings so you do not need to buy those separate. When I called I was told I needed the bearings so I bought 3 assuming I would be able to salvage the others. Turns out I did not need them. Read more
The Door Recess Spring is an OEM replacement part for GE side-by-side refrigerators. It sits within the icemaker door frame to control movement and allow smooth closing/opening of the access point.
Causes of a bad icemaker door recess spring include wear and tear of thin metal coils repeatedly compressing over many years of filling cycles. Exposure to humidity intrusions from melting ice accumulates oxidation shortening spring elasticity.
Symptoms of a bad icemaker door recess spring include:
This genuine GE replacement spring is compatible with Hotpoint, RCA and Kenmore models.
The Refrigerator Union Connector is an OEM replacement part for GE refrigerators. It is responsible for connecting the water supply lines from the kitchen plumbing to the refrigerator, allowing water to flow to the ice maker and water dispenser. The plastic connector assists your water dispenser by joining two 5/16 inch x 5/16 inch plastic water lines. Over time, Union Connectors can crack or break under pressure.
Causes of a bad Union Connector include wear and tear from repeated use, exposure to extreme fluctuations or surges in water pressure, or damage from accidental mishandling.
Symptoms of a bad Refrigerator Union Connector include:
We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as... Read more
The Light Switch is an OEM replacement part for GE refrigerators. It controls the interior light, turning it on when the refrigerator door is opened and off when the door is closed. This ensures proper illumination for visibility when accessing the refrigerator's contents.
A malfunctioning light switch can result from wear and tear, electrical issues, or damage caused by repeated use. Over time, the internal mechanism may fail, or the housing can crack, leading to improper operation.
Symptoms of a bad light switch include:
I ordered a new switch from APP and fixed my fridge. However, the video posted for this repair on this site is not applicable to newer refrigerator models. I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch. So the correct method to replace the light switch in a newer model refrigerator is as... Read more
The Dairy Door is an OEM part for GE refrigerators. It is designed to fit into the refrigerator door and provide a covered compartment for storing butter, cheese, and other dairy products. This compartment helps to keep these items at a slightly different temperature than the rest of the refrigerator, which can extend their freshness.
Symptoms of a bad Dairy Door include:
Causes of a bad dairy door can include normal wear and tear from frequent opening and closing, accidental damage from loading or unloading items, or material degradation from exposure to the various conditions inside a refrigerator.
Just enter the appliance model and the all the parts are pictured! Really easy! Read more
The Condenser Fan Motor is an OEM part for GE refrigerators. This fan motor circulates air in the fridge, helping to cool the compressor and condenser coils for better temperature control. It also evaporates extra water in the drain pan, stopping problems from water buildup.
Symptoms of a failing condenser fan motor include:
Causes of condenser fan motor failure typically include wear and tear from continuous use, dust and debris accumulation obstructing fan movement, or electrical issues such as faulty wiring or capacitor problems.
Note: This is a (12-volt DC) fan motor. For the (115-volt AC) fan motor, order part number WR60X10220.
New cond fan & new evap fan & new defrost heater unit Read more
This OEM Replacement Part is a clear, meat pan designed for GE refrigerators. The pan measures approximately 20 inches wide, 9 inches high, and 17 inches deep. It is a pan designed to be placed inside the refrigerator compartment for storing and holding raw meats, poultry, or other foods that may produce juices or drippings.
A damaged or worn meat pan can lead to leaks, spills, and potential cross-contamination within the refrigerator. Causes of a bad meat pan may include physical impact, improper cleaning methods, or simply wear and tear over time.
Symptoms of a faulty meat pan include:
The Dispenser Switch is an OEM replacement part for GE refrigerators. This switch is crucial for the functionality of the water and ice dispenser, as it activates the dispensing mechanism when the user presses the lever or button. The switch ensures that the refrigerator dispenses water or ice on demand, providing convenience and ease of use.
Over time, the dispenser switch can wear out or become damaged due to frequent use, exposure to moisture, or electrical issues. This can result in the switch failing to activate the dispenser properly, impacting the performance of the refrigerator's dispensing system.
Symptoms of a bad dispenser switch include:
After disconnecting power to the fridge, I first removed the ice maker/water dispenser/fridge control faceplate. This easily popped out using a flat head screw driver. Then disconnected the 3 wire harness connections to the control board. I next removed the plastic dispenser housing shield. There's only 4 screws that hold this on. Finally, I removed the Micro-switch, disconnected the two wire connectors and installed the replacement switch and reinstalled everything. The repair took only... Read more
The Pan Snack Lower is an OEM part for GE refrigerators. This component is designed to store snacks and other small items in the lower section of the refrigerator, offering a convenient and organized storage solution. The pan slides in and out smoothly, making it easy to access your snacks and keep them fresh.
Causes of a bad pan snack lower can include physical damage from overloading or mishandling, cracks or breaks from wear and tear over time, or issues with the sliding mechanism that prevent it from operating correctly. A damaged or malfunctioning pan can reduce storage efficiency and accessibility.
Symptoms of a bad pan snack lower include:
I ordered the parts I needed from Appliance Parts Pros which I found very easily. The installation was as easy as turning a few screws to attach the rails, putting the glass in place, and sliding the drawer back in place. Read more