Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Microwave won't start or runs with door open? Failed door switch prevents safe operation. Simple DIY fix with basic tools in under 30 minutes.
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more
Microwave won't turn on or trips breaker? The time delay fuse protects against power surges. Located by the magnetron. Moderate DIY repair.
Called AppliancePartsPros because of good experiencing diagnosing problem with a dishwasher repair. We definitely are modest income amateurs! Same excellent response to our questions. Three possible causes. Used easy search menu to fine replacement parts. Bought all three, knowing that if all not needed, the others could be returned (within 365 days) for refund. Replaced the capacitor successfully after calling to get more help with a couple of places where we got stuck. Oven now works... Read more
Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.
My son told me that almost all the microwave ovens that came into the repair center he worked at, 15 years ago, had a defective magnetron. I ordered a magnetron, and sat back until one shipped. The one that came, the first time, was in a small factory cardboard box, which was in a large bubble-pak Fedex envelope; which didn't show any signs of abuse. Inside, however, the factory box was beat up. Removing the magnetron, I noticed that the socket, as well as its' pins, was bent, and loose in the... Read more
Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.
Needed installation parts. I ordered the parts from the company I purchased the appliances from. A week went by and no parts, called, emailed and called again to find out when the parts would arrive to be able to Re-schedule the installation. After the run around, I found AppliancePartsPros website and placed my order with them. I received the parts I needed within the time they promised. I was able to schedule my installation to enjoy my new appliance. It's been almost 4 weeks and still no... Read more
Exhaust damper for microwave venting systems. Installs on rear exhaust to regulate airflow. Replace if cracked, broken, missing, or not sealing properly.
Microwave won't start or stops working? A broken door latch prevents the door switch from engaging. Direct replacement, typically takes 15-30 minutes.
I removed the old choke cover (which in error I snapped in half) to expose the latch and spring. Removed the broken latch. Placed the new latch in, replaced the spring and put on the new choke cover. Read more
Replace your microwave's interior or underside light bulb when dim or burned out. Restores visibility for monitoring food. Confirm fit with your model.
Microwave door won't stay closed or latch? This door latch spring provides tension to secure the door shut. DIY repair in under 10 minutes with video help.
Ordered door latch part and new spring. You Tube video helped me identify what I needed. I tried the fix recommended and it didn't work so I ordered the parts. It took less than 5 minutes to switch out the old for the new. If the door doesn't latch, you can't run the microwave and it's key. It wasn't an expensive or hard fix to get my microwave up and running again. So pleased with AppliancePartsPros for having what I needed and being reasonable about pricing. Turnaround time was excellent! Read more
Microwave won't heat or makes loud buzzing noise? The diode regulates magnetron current flow. Simple repair—test with multimeter for continuity.
I have a multimeter so I was able to check the fuse per website recommendations and it was blown. However, the capacitor on the microwave was also original so I elected to replace the capacitor, fuse, and the ground protect diode. The repair was very simple (making sure the capacitor was discharged before replacing) and the microwave is now up and running again. Excellent trade to buy $40 worth of parts rather than a new $400 microwave. One nit - Kenmore puts a screw in the back that... Read more
Protective shield that covers internal components on the microwave door. Replace if cracked, broken, or tabs have snapped off during handle or latch repair.
Careful placement of new screws into the inside of the outer door that now hold the frame assembly to the door secured the frame assembly to the outer door. All of the other parts I bought and replaced were a waste of money. I figured since I had them I might as well install them anyways. Easier than sending them back since I had the whole thing apart anyways. The part I really needed was no longer available, the outside door. The glass reinstalled into the retainers in the door without a... Read more
Inner door frame assembly for microwaves. Supports window, trim, handle, and latch alignment. Replace if cracked, broken, or structural clips damaged.
Metal mounting plate that secures the microwave chassis to the wall or cabinet. Replace if bracket is bent, cracked, or missing during installation.
Called appliance parts pros and received the OEM bracket the next day. Fit perfectly. No problem. Read more
Plastic film covers holes in the microwave inner door frame. Replace if bubbled, burned, cracked, or peeling. Attaches to door glass assembly.
Holds the light bulb and maintains electrical connection in your microwave. Replace when socket is cracked, heat-damaged, or causes flickering lights.
Added an additional light socket to the existing reflector. Changed the original 40 watt incandescent bulb to two 5 watt LED bulbs. It's actually bright enough for my old eyes now. Read more
Mounting hardware kit for installing microwave to wall or cabinet. Includes screws, bolts, and brackets needed to secure unit. Replaces missing parts.
Ordered it from you. Read more
Truss head tapping screw secures panels, brackets, and covers in appliances. Replaces missing or damaged fasteners to restore snug fit and alignment.
Removed old broken door handle per video link on AppliancePartsPro.com. Installed new handle with no issues. <10 minute job at best. Read more