Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker stopped working or not making ice? This complete ice maker assembly restores production. DIY install in 20-30 minutes with basic tools.
I replaced the ice maker after replacing the ice try and before that the ice chute gasket. All easy fixes. However, I am still seeing some frost build-up leading me to believe that the issue is just a faulty design, which I have read other posts on. Just too much warm air gets in the ice maker because it is located in the refrigerator, plus warm air probably finds its way from the outside dispenser, up the chute into the ice maker. Oh well, nothing the occasional hair dryer won't take care of,... Read more
Fix ice buildup on evaporator coils or inconsistent cooling with this refrigerator temperature sensor. Easy DIY repair with our video guide.
Poped off plastics caseing inside the frigerator. Unscrewed 4 screws holding black fan inplace. Followed yellow wire to locate white sensor. Need to be careful not to break styrofoam, don't force it, it should seporate from plastic easy as long as the 4 screws are out. Swap it for the new one and button it back up. While I was in there I replaced the defrost sensor and the other sensor next to the heating rod. Also I know there is an issue with drain hole plugging up with ice so I extended the... Read more
Ice dispenser jammed or cracked bucket? This ice bucket assembly stores ice and feeds the dispenser. Easy DIY fix in under 10 minutes for most models.
I noticed that the bottom of the plastic bucket was cracked even though it was less than two years old. I called Samsung and they wanted to charge me almost $200. Instead, I found the part at appliance parts pros for half that cost. Since I replaced the ice tray bucket assembly, my ice maker is working perfectly! Read more
Removes chlorine, lead, and mercury for clean, fresh-tasting water. Replace every 6 months or when flow decreases. Confirm fit with your model number.
I called your company with the serial number of the fridge, and had the best service locating the exact items i needed. I placed by order . and company called to confirm my order and the method of my payment. Thank you very much Read more
Refrigerator not cooling or ice building up? The evaporator fan motor circulates cold air. Common DIY repair when fridge runs warm or makes noise.
Replaced fan motor, temperature sensor and defrost thermostat. Note: I had to replace connector on new defrost thermostat. Connector on new part did not fit mating connector in refrigerator.. spliced in old connector for new one. Read more
Fix frozen food or incorrect temperature readings with a new refrigerator temperature sensor. Common DIY fix taking about 1 hour with basic tools.
Plastic support bracket that secures the freezer handle to the door. Replace if cracked, broken, or missing to properly mount your handle assembly.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
Replaces broken or worn auto-close lever assembly on refrigerator doors. Mounts at top of door to ensure automatic closing and proper seal alignment.
Repair went great thanks for your service Read more
Plastic support bracket that secures the freezer door handle. Replace if cracked, broken, or handle keeps loosening. Installs on bottom freezer drawer.
Followed your instruction from your youTube instructions Read more
Plastic center hinge for French door refrigerators. Installs on the mullion assembly between left and right doors. Replace when cracked, broken, or snapped.
I ordered the French door housing, the new piece has a solid raised curved part that enters the guide, and a new center hinge. I watched both repair videos shown on appliance parts Pro. It looked pretty simple, so I got my 2 screw drivers and unplugged the refrigerator and started. The hardest part was removing the upper and lower hinges. The video didn’t show how he got them loose, after several minutes of frustration I figured out how to release the hinge. The new parts installed really... Read more
Replaces the hinge that operates the center flap on French door refrigerators. Needed when the plastic hinge clip is cracked, broken, or detached from the spring mechanism.
I loosened middle hinge by the 2 screws which holds a power cord that clips together, then slid the hinge flap upward to release from the door. My bottom clip hinge was broken away from spring and the only way to attach a new hinge clip was to carefully separate the hinge flap. This can be done by squeezing the flap to see where the separation seams are. Small narrow screwdrivers along with a spatula will do without damaging the plastic. This allowed for acess to the spring which connects to a... Read more
Fix a frozen evaporator or frost buildup in your fridge. This defrost heater with built-in thermostat prevents ice on coils. DIY-friendly, 10-min install.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Replaces broken or missing end cap on refrigerator freezer door handle. Snaps into place to complete handle appearance. Commonly cracks or breaks off.
Replaces broken or missing handle mounting stud that secures refrigerator door handles. Installs into door to hold handle firmly in place.
Replaces broken or worn center mullion assembly between French doors. Includes internal spring mechanism. Needed when flap won't stay closed or spring fails.
The easiest repair I've ever done. I originally thought (after watching some youtube tutorials) I would need to replace the spring on the flap, but it is not accessible on our Samsung model. Undid the two screws holding the flap to the fridge door, pop it up off the other supports, and un-clip it from the power cord. Put the new flap on the same way and all done! Delivery of the part was crazy fast too! Read more
Seals the ice chute assembly in your refrigerator's dispenser door. Replace if cracked, broken, or missing to prevent frost buildup and air leaks.
Replaced chute gasket and ice bin. Has worked great so far. Fingers crossed. Read more