Parts for Frigidaire FRS23KF7AW4: 09 - Shelves Parts

This Frigidaire Refrigerator Water Filter is an OEM replacement part for select Frigidaire brand refrigerators with a slide-out cartridge in the front compartment. Your refrigerator water filter reduces the chorine taste and odor from your water. It also effectively helps filter out sediment, including dirt, sand, and rust,

The filter is easy to install without the need for special tools and should be changed every 6 months. With an operating temperature range of 33-100°F and a pressure range of 30-100 PSI, this OEM part offers reliable performance. The filter measures approximately 6-3/4" x 5-1/4" x 2-1/4" and features a high-grade coconut carbon filter media. 

For filter bypass order 242227702.

This shelf and trim assembly replaces a damaged or worn refrigerator shelf trim to restore a secure shelf edge and improve storage stability. It provides the finished trim piece that retains items and keeps the shelf seated correctly. What it does:

• Replaces cracked, chipped, or missing shelf trim so food and containers stay securely on the shelf
• Restores the shelf edge that helps prevent items from sliding off when opening the door
• Re-establishes a proper fit between the shelf and cabinet for stable storage
• Helps maintain the refrigerator's interior appearance by replacing worn trim

• One shelf and trim assembly

• High-level replacement only — remove food and shelves before installing
• Use basic hand tools; avoid overtightening to prevent cracking the trim
• If the shelf is damaged, replace the shelf and trim together for best fit
• Disconnect power only if service requires accessing electrical components

This refrigerator shelf restores a flat, sturdy surface for storing food and containers. Replace a broken or missing shelf to regain capacity, keep items organized, and help prevent spills inside your appliance.

• Provides a level platform to hold groceries and containers
• Helps organize contents and maximize usable space
• Replaces damaged, bent, or missing shelves
• Common symptoms: cracked/broken shelf, wobbling, items tipping, reduced storage capacity

• Empty the area and wear gloves; handle carefully to avoid injury or damage
• Align the shelf with the side supports and slide or lower it into place
• Ensure it's fully seated before loading; distribute weight evenly

Replacement shelf assembly for the freezer compartment restores a sturdy, level surface for food storage and organization. Replace a damaged or missing shelf to recover capacity, maintain proper spacing, and keep items from shifting.

• Creates a rigid support surface for items in the freezer section
• Maintains intended storage layout and airflow when installed in the correct position
• Replaces a bent, broken, rusted, or missing shelf
• Helps prevent tipping and overcrowding that can damage contents

• Unplug the appliance and wear gloves for safety.
• Remove or relocate food; slide or lift the old shelf out of its supports.
• Align the new shelf with the rails or tabs and fully seat it.
• Verify the shelf is level and secure before loading.

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

• The oven interior remains dark when the light switch is engaged.
• Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
• Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Light Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding the light bulb in place and providing the electrical connection needed to illuminate the refrigerator's interior. This ensures visibility inside the refrigerator, helping you easily find and access your stored food items.

Causes of a bad light socket can include electrical malfunctions, wear and tear over time, or damage due to bulb replacements or impact.

Symptoms of a bad light socket include:

• The refrigerator light not turning on
• Flickering or dim light
• Visible damage to the socket
• Electrical sparking or unusual noises when the light is on

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Restore stable storage and help contain leaks with this Spill Safe Shelf. Replacing a cracked or missing shelf brings back usable space and helps prevent spills from dripping onto lower shelves and drawers.

• Supports food and containers on the designated refrigerator level
• Spill Safe design helps contain minor leaks to the shelf area
• Replace if the shelf is cracked, warped, loose, or missing
• Common symptoms: drips reaching lower shelves, shelf no longer seating correctly, reduced storage capacity

• Remove all items from the shelf area before replacement
• Slide the old shelf out; align the rear of the new shelf with the slots/rails, then lower the front until fully seated
• Do not force into place; use the correct rail position for your model
• Handle with both hands to avoid dropping or damaging the shelf

Restore stable storage and help contain leaks with this Spill Safe Shelf. Replacing a cracked or missing shelf brings back usable space and helps prevent spills from dripping onto lower shelves and drawers.

• Supports food and containers on the designated refrigerator level
• Spill Safe design helps contain minor leaks to the shelf area
• Replace if the shelf is cracked, warped, loose, or missing
• Common symptoms: drips reaching lower shelves, shelf no longer seating correctly, reduced storage capacity

• Remove all items from the shelf area before replacement
• Slide the old shelf out; align the rear of the new shelf with the slots/rails, then lower the front until fully seated
• Do not force into place; use the correct rail position for your model
• Handle with both hands to avoid dropping or damaging the shelf

The Lower Crisper Pan Cover is an OEM replacement part for Frigidaire refrigerators. It provides a protective barrier that covers the lower crisper storage pan. 

Symptoms of a bad crisper pan cover include:

• Cracks, holes, or discoloration of the plastic material
• Improper fitment that does not fully cover the crisper pan

Causes of a bad crisper pan cover can be prolonged use leading to wear and tear of the plastic over time. Accidental damage from cleaning chemicals or physical impact could also degrade its protective function.

Note: This cover does not include glass. Some models did not use the glass but if preferred, you can order part# 240350614. 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Crisper Pan Cover is an OEM part for Frigidaire refrigerators. It serves as the cover for the crisper drawer, providing a sturdy surface that helps to keep fruits and vegetables fresh by maintaining the appropriate humidity levels within the drawer. The cover also functions as a shelf for additional storage space.

Signs of damage can include broken edges, visible cracks, or an inability to properly fit or stay in place.

Symptoms of a bad upper crisper pan cover include:

• Difficulty sliding the crisper drawer in and out
• Food items not staying fresh due to improper humidity levels
• Visible cracks or damage to the cover
• The cover not staying securely in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This humidity control assembly regulates moisture levels in the refrigerator's crisper/produce compartment to help keep fruits and vegetables fresher. It replaces a failed or unresponsive humidity control to restore proper compartment humidity. What it does:

• Senses and adjusts airflow to the crisper/produce drawer to help control moisture levels.
• Helps reduce excess humidity that can cause wilting or increase moisture that can accelerate spoilage.
• Stops or corrects intermittent or non-responsive humidity settings that affect drawer performance.
• Can resolve issues with produce drawer not maintaining expected humidity or feeling excessively wet or dry.

• One humidity control assembly.

• Disconnect power to the appliance before beginning any work.
• Remove produce drawers and access panels as needed to reach the control; handle gently to avoid damaging clips or electrical connectors.
• Reconnect wiring harness securely and test function before fully reassembling.

The Crisper Pan is an OEM part for Frigidaire refrigerators. It provides enclosed storage for fruits and vegetables, helping maintain freshness.

Over time, the crisper pan can crack or warp due to exposure to cold, moisture, and repeated opening/closing. Damage from improper handling when loading produce can also cause failure.

Symptoms of a failing crisper pan include:

• Poor humidity regulation/airflow
• Condensation buildup inside the pan
• Visible cracks or splits in the plastic
• Difficulty sliding the crisper in and out
• Produce spoiling more quickly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Note: Due to a factory revision, the new crisper pan may not have the graphics across the front but is a genuine factory replacement part.  

The Lower Crisper Pan is an OEM part for Frigidaire refrigerators. This pan is designed to store fruits and vegetables at optimal humidity levels, keeping them fresh for longer periods. It fits at the bottom of the refrigerator, sliding in and out smoothly for easy access and organization of produce.

Causes of a bad Lower Crisper Pan can include cracks or breaks due to regular use, accidental impacts from heavy or awkwardly shaped items, or damage from improper handling during cleaning. These issues can compromise the pan's functionality, leading to reduced storage efficiency.

Symptoms of a bad Lower Crisper Pan include:

• Visible cracks or damage to the pan
• Difficulty sliding the pan in and out
• Produce not staying fresh as long due to improper humidity control

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This front shelf trim replaces a cracked, chipped or missing trim piece to restore the shelf edge and help keep items from sliding off. Durable trim snaps into the shelf front for a clean, finished look. What it does

• Replaces damaged or missing front shelf trim to restore the shelf edge
• Helps keep items from sliding forward off the shelf
• Restores a finished appearance to the shelf front
• Works with the corresponding shelf assembly to maintain proper fit

• Remove food and shelves before installing; handle glass shelves with care
• Trim typically snaps or screws into the shelf front—align and press until it seats
• Use basic hand tools if fasteners are present; do not force parts to avoid breakage

The Refrigerator Meat Pan Hanger is an OEM part for Frigidaire refrigerators. It supports the meat pan, allowing it to slide in and out smoothly for easy access to stored items. This hanger ensures the proper positioning and stability of the meat pan within the refrigerator.

Causes of a bad meat pan hanger can include wear and tear from frequent use, accidental impacts, or damage due to overloading the meat pan. A faulty hanger can lead to difficulties in sliding the pan and may affect the organization of the refrigerator.

Symptoms of a bad refrigerator meat pan hanger include:

• The meat pan not sliding smoothly or getting stuck
• Visible cracks or breaks in the hanger
• The meat pan tilting or becoming misaligned
• Difficulty in maintaining the position of the meat pan

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Meat Pan Hanger, Right Side is an OEM part for Frigidaire refrigerators. It is specifically designed to support the meat pan on the right side, ensuring it hangs securely and slides smoothly when accessed. This component is crucial for maintaining the structural integrity of the refrigerator's internal organization, allowing for efficient storage and easy access to meats and other perishables.

Symptoms of a bad Refrigerator Meat Pan Hanger include:

• The meat pan drooping or not holding in place,
• Difficulty in sliding the pan in or out,
• Visible damage or breakage of the hanger.

Causes of meat pan hanger failure typically involve excessive weight in the pan, frequent and forceful use, or physical impacts that could weaken or break the hanger.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement glass insert fits into the crisper cover frame to create a sturdy, easy to clean surface above your produce drawers. Replace a cracked or missing insert to restore safe storage and proper drawer support.

• Sits in the crisper cover frame to support items above the drawers
• Helps contain spills to protect the drawers below
• Maintains correct spacing so crisper drawers open and close smoothly
• Replace when the original glass is cracked, chipped, shattered, or missing

• Unload the shelf and remove the crisper drawers
• Lift out the crisper cover frame and place it on a flat surface
• Remove the damaged glass and set the new insert into the frame recess without forcing
• Reinstall the cover and drawers; wear cut-resistant gloves and handle glass carefully

This Glass Shelf Inset is an OEM replacement part for Frigidaire refrigerators. Crafted from durable transparent glass, this shelf creates an enclosed area optimized for storing fruits and vegetables in the upper fridge compartment.

Causes of a damaged glass shelf insert can include chips or cracks developing from impact or excessive weight loads over time.

Symptoms of an inadequate upper crisper pan include:

• Leaks or moisture inside upper refrigerator shelves
• Blocked visibility of produce and food items
• Inability to properly store hydrated fruits and veggies
• Products drying out or spoiling faster without humidity control

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, and Kelvinator.

The Freezer Basket Hanger is an OEM part for Frigidaire freezers. This component is designed to support the freezer basket, ensuring it stays securely in place, allowing for organized storage and easy access to frozen items.

You should replace the freezer basket hanger if it becomes damaged or fails to hold the basket properly. Causes of a bad freezer basket hanger can include regular wear and tear from frequent use, accidental impacts, or exposure to heavy loads that exceed its design specifications.

Symptoms of a bad freezer basket hanger include:

• The freezer basket not staying in place
• Difficulty in sliding the basket in and out
• Visible cracks or breaks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Basket Hanger is an OEM part for Frigidaire refrigerators. This component supports the freezer basket, ensuring it stays securely in place and slides in and out smoothly. The hanger is crucial for organizing and maximizing the storage space in the freezer compartment.

Causes of a bad hanger can include repeated use leading to wear and tear, exposure to heavy loads, or accidental breakage. A faulty hanger can lead to instability and difficulty accessing the freezer basket.

Symptoms of a bad freezer basket hanger include:

• Freezer basket not staying in place
• Difficulty sliding the basket in and out
• Freezer basket sagging or tilting
• Visible damage or cracks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Basket Hanger is an OEM part for Frigidaire freezers. This component is designed to support the freezer basket, ensuring it stays securely in place, allowing for organized storage and easy access to frozen items.

You should replace the freezer basket hanger if it becomes damaged or fails to hold the basket properly. Causes of a bad freezer basket hanger can include regular wear and tear from frequent use, accidental impacts, or exposure to heavy loads that exceed its design specifications.

Symptoms of a bad freezer basket hanger include:

• The freezer basket not staying in place
• Difficulty in sliding the basket in and out
• Visible cracks or breaks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Basket Hanger is an OEM part for Frigidaire refrigerators. This component supports the freezer basket, ensuring it stays securely in place and slides in and out smoothly. The hanger is crucial for organizing and maximizing the storage space in the freezer compartment.

Causes of a bad hanger can include repeated use leading to wear and tear, exposure to heavy loads, or accidental breakage. A faulty hanger can lead to instability and difficulty accessing the freezer basket.

Symptoms of a bad freezer basket hanger include:

• Freezer basket not staying in place
• Difficulty sliding the basket in and out
• Freezer basket sagging or tilting
• Visible damage or cracks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This meat pan is the refrigerator's deli drawer. Replacing a cracked or missing bin restores smooth sliding access for meats and cheeses and helps keep the fresh food section organized.

• Creates a dedicated compartment for deli items in the fresh food section
• Slides on existing shelf rails for easy access
• Restores proper fit when the original bin is cracked, warped, or missing
• Common symptoms: broken or missing drawer, front lip cracked, drawer falls or won't slide smoothly

• Remove contents; pull the old drawer straight out from the rails
• Inspect and clean the rails; transfer any reusable parts from the old drawer if applicable
• Align the new pan on the rails and slide it fully into place
• If movement is tight, confirm the shelf cover and rails are seated and level

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This water tank assembly with coiled tubing stores and channels refrigerator water for the dispenser/ice system, keeping water routed and ready for use. Replaces a damaged or leaking reservoir to restore proper water flow. What it does

• Holds and directs water from the supply line into the dispenser/ice system via integrated coiled tubing.
• Helps maintain correct water flow and routing inside the refrigerator.
• Commonly used when the tank leaks, cracks, or causes reduced/irregular water dispense.
• Designed to work with the fridge's internal water plumbing and fittings.

• Turn off power to the refrigerator and shut off the water supply before starting.
• Drain remaining water from lines to reduce spills; have towels handy.
• Inspect and reuse or replace associated seals and fittings as needed for a watertight connection.

This cover shields internal components and gives the appliance a finished appearance while preventing debris from entering sensitive areas. It restores a clean look and helps keep wiring and mechanics protected. What it does:

• Protects internal parts from dust, dirt and accidental contact
• Secures and conceals wiring, connectors and small components
• Helps stop rattles or vibration-related noise when intact
• Restores finished appearance after damage or loss

• Disconnect power to the appliance before starting any work
• Remove any retaining screws or clips to access and replace the cover
• Handle carefully to avoid damaging mounting tabs or clips

This is a factory replacement screw fastener used to secure components in your appliance. It restores a tight, rattle-free fit for panels, brackets, and trim when an original screw is missing, stripped, or corroded.

• Secures panels, brackets, and trim to the appliance cabinet or liner
• Replaces a missing, stripped, or rusty screw
• Helps eliminate looseness, vibration, or rattling components
• Maintains proper alignment and a clean, factory fit

• Unplug the appliance before servicing; if near water lines, shut off the supply
• Match to the original and install in the same location/orientation
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• Keep and reuse any original washers or spacers if present

This ice cream shelf replaces a cracked, damaged, or missing freezer door shelf to restore convenient storage for tubs and small containers. Durable molded plastic matches the original fit and helps keep frozen goods organized. What it does:

• Provides a dedicated shelf area on the freezer door for ice cream tubs and small frozen items
• Replaces broken, cracked, warped, or missing shelves that no longer hold containers securely
• Restores proper spacing and organization in the freezer door to prevent items from falling
• Matches OEM fit and mounting points for a direct replacement

• Remove all food and empty the door area before installing
• Inspect mounting tabs/rails for damage; replace any broken clips separately
• Align shelf tabs with door slots and press into place until fully seated
• Use caution to avoid pinching; wear gloves if edges are cold or sharp

This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.

• Fastens the designated component to the appliance cabinet or assembly
• Helps reduce looseness, vibration, and rattling
• Replaces missing, corroded, or stripped screws
• Supports proper alignment of panels, trim, and brackets

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to the original location; retain any reusable clips or washers
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten into plastic or thin metal

Right hand side. For the left hand side order 241674401

Left hand side. For the right hand side order 241674402

This small clip secures the crisper cover's slide so it stays aligned and operates smoothly. Replacing a broken or missing clip restores proper slide action and helps keep your crisper cover assembly functioning as designed.

• Holds the crisper cover slide in place and aligned with its track
• Helps the slide move smoothly without popping off or binding
• Common symptoms: slide is loose or falls out, won't stay in place, cracked/missing clip
• Visual damage or loss can leave the crisper drawer cover slide inoperable

• Disconnect power and remove food items for safe access
• Remove the crisper drawer and lift out the crisper cover assembly
• Release the damaged clip and snap the new clip into the cover/slide as oriented
• Reassemble and verify the slide moves freely end to end

This clip mounts to the refrigerator liner and secures the crisper cover/slide rail so the drawer stays supported and glides properly. Replace a broken or missing clip to restore alignment and smooth operation of the crisper.

• Holds the crisper cover/slide rail firmly against the cabinet liner
• Supports the crisper drawer to prevent sagging or tilt
• Helps restore smooth opening and closing of the crisper drawer
• Common symptoms of failure: loose rail, drawer off-track, difficulty sliding, or a cracked/missing clip

• Unplug the refrigerator or disconnect power before servicing
• Remove the crisper drawer and cover/glass to access the clip
• Release the old clip (snap tabs or screw), align and secure the new clip; reuse the original fastener if your model uses one
• Reinstall the cover and drawer; the drawer slides freely