Parts for Craftsman 358796341: Shroud / Crankcase / Crankshaft Parts

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This genuine Husqvarna gasket kit for a hedge trimmer or a string trimmer contains the gasket and the fastening components required to attach the gasket to the engine and seal the engine, thereby protecting it from damage. Symptoms of a blown gasket can include smoke pouring out of the exhaust, an overheating engine, or oil leakages. If any of these symptoms can be directly attributed to the gasket, it should be removed and replaced immediately before using the hedge trimmer or string trimmer again. If the blown gasket has also damaged the fastening components, a full gasket kit should be ordered to replace every component of the gasket. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This gasket kit is compatible with the following brands: MTD and Cub Cadet. This part is sold individually.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

This is a genuine outer bearing replacement for use on select models of outdoor lawn and garden equipment. The outer bearing is installed on the crankshaft and helps create a flexible joint for the various components to move against. This bearing is made of durable metal material, but over time it can become worn and damaged. It may also come loose or get lost in the process of other repairs. In any case, a faulty bearing will need an immediate and original replacement. Wear gloves and allow the engine to cool completely before beginning any repairs. Be sure to take the crankshaft components apart carefully to access the bearing so that they can be reassembled properly. Bearings should also be lubricated when installed.This is an OEM part that is manufactured to exact standards. It is made by Craftsman and can be used in machines from Weed Eater, Poulan, and Craftsman. This bearing can be used in compatible blowers, edgers, trimmers, pruners, and hedge trimmers. It is sold as an individual unit and there is no additional hardware included.

A crankcase seal is what prevents the oil from leaking between the crankcase opening and the crankshaft. It is often found on the engine's front or underside and seals the timing cover to the crankshaft. Oil seals may become damaged or worn with use. Bearing seizures and grinding indicate that the crankcase seal should be replaced. If there is oil leaking from the crankcase or on the crankshaft, a replacement crankcase seal is necessary.Wear gloves and be sure to collect all the tools needed prior to starting a replacement. Replacing a crankcase seal requires Torx wrenches, a container for fuel, spark plug socket or wrench, adjustable or 10-millimeter wrench, rubber mallet, long-nosed pliers, screwdriver, adjustable pliers, socket set, starter rope, 2-cycle engine oil, ignition gapping gauge, and a razor blade. Follow the operator manual for specific directions.The crankcase seal is a genuine OEM part. It is sold individually. The crankcase seal is black, round, and made from durable, high-quality plastic and metal for extensive use. It can be used in a variety of lawn equipment, including leaf blowers, trimmers, hedge trimmers, and vacuums. It is compatible with various manufacturers, including Craftsman, Husqvarna, Weed Eater, RedMax, and Poulan Pro.

This replacement piston kit is designed to be used with many different types of handheld lawn and garden equipment. The pistons are important parts of the engine. The crankshaft powers the pistons, so they move up and down within the cylinder. The purpose of the pistons is to transfer the gas that expands within the cylinder. The pistons can begin to wear out over time, which means that they could fail, which will cause serious problems for engine performance. If there are issues with the piston, a replacement piston kit is essential to get the machine back up and running. When a piston goes bad, it will cause the engine power to decrease. In some cases, the engine might lose all power. Replacement will require pliers, a set of wrenches, and a screwdriver to complete. This high-quality piston kit replacement is a genuine OEM part. It is sold individually. The part can be used for pole pruners, edgers, leaf blowers, string trimmers, and hedge trimmers. Compatible brands include Weed Eater, Poulan, Poulan Pro, Husqvarna, and Craftsman.

Here is a replacement piston kit for use with handheld lawn and garden equipment engines. The pistons in an engine are essential to transfer combustion power to the various working parts of the machine. Pistons might need to be replaced if they have suffered any sort of damage or corrosion. There are several parts to the system including the piston, rings, wristpin, and circlips. The damage or wear and tear could occur in any of these different parts. When replacing a piston, it is a good idea to replace all of the parts of the kit, not just the part that is having issues. This authentic OEM piston kit is compatible with string trimmers, leaf blowers, hedge trimmers, pole pruners, and edgers. It is sold individually and is compatible with Husqvarna, Craftsman, Poulan, Poulan Pro, and Weed Eater brands. Owners buying a piston kit need to be sure they are getting the right part for their make and model.

A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.

This is a carburetor adapter. If this part is broken or deteriorated the carburetor may not function as efficiently, potentially causing the engine to misfire or reducing engine performance. In an internal combustion engine the carburetor is responsible for sending a combination of fuel and air to the motor for ignition. This carburetor adapter fits between the cylinder and carburetor to improve the functionality of the carburetor and, ultimately, the performance of the engine. This part is manufactured from high-quality and durable plastic. This carburetor adapter is a genuine OEM replacement part that has been sourced directly from the manufacturer. This carburetor adapter fits various different models of Husqvarna, WeedEater, and Poulan blowers, trimmers, and hedge trimmers. Please note this part is sold individually.

This is a choke control which is used on various types of trimmers for yards and gardens. It is made of durable plastic and is responsible for letting fuel go into the engine whenever the motor is running. The choke control comes with a steel ball, metal valve door, and a spring. If the choke control is damaged or stops working, it will need to be replaced. The engine will not receive fuel if the part is malfunctioning or otherwise damaged.This is a fairly easy replacement project that requires no tools other than a screwdriver. First, make sure the trimmer is turned off to prevent any accidents. Place it on a flat surface while making the replacement. The first step is to remove the carburetor from the engine. At that point, the choke control can be removed and the new replacement part can be installed. Reinstall the carburetor and the equipment will be ready for use.This choke control is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The choke control is designed to be used in string trimmers and hedge trimmers created by Craftsman, Poulan, and Weed Eater.

Screws are responsible for holding together various lawn and garden engine components and housing parts. Although it is made of durable metal, the screw can be subject to damage from an incident or impact. It could also become worn or stripped over time, or even lost in the process of other repairs. As a result, a replacement would be necessary, and it should be made as soon as possible. This screw will provide the perfect fit for compatible machines. This genuine OEM replacement screw is manufactured by Husqvarna to exact standards. It can be found in applications on more than 150 machines from Poulan, Husqvarna, Weed Eater, and Jonsered. The screw is used on multiple machines, including hedge trimmers, pruners, blowers, and trimmers. Be sure to check the parts diagram for exact application and location of this screw. The screw is sold individually as a single unit and those who need more than one will have to purchase additional quantities. This screw is made of premium metal and requires a Phillips head screwdriver for replacement.

The carburetor kit has a metal body that is designed to withstand high temperatures, a rubber primer bulb, and a plastic throttle lever. The carburetor is an integral part of engines in lawn and garden equipment. This is where the air and fuel will be mixed before being sent into the engine. The air comes in through the intake tube, and it flows into a smaller tube, where the fuel is injected through small holes in the carburetor body. Then, the two are mixed and released into the engine through a butterfly valve, which controls the amount of fuel going to the engine for optimal performance. The carburetor can become clogged over time or even be broken or damaged. If the engine is not running properly, the carburetor may need to be replaced. This is a simple replacement that only requires a screwdriver. Make sure to always disconnect the spark plug and wear gloves when performing engine repairs. This kit can be used with several models of lawn and garden equipment, including brands like Weed Eater, Paramount, Poulan, Jonsered, and Husqvarna.

This throttle cable is made for string trimmers and hedge trimmers. The part is designed to link the throttle trigger with the carburetor to ensure the equipment runs smoothly at all times. The small connectors on the end of the throttle cable can break or become brittle through time and use. Throttle cables can also kink or become damaged in other ways and will need to be replaced. If there is damage to the throttle cable, it will need to be removed for the replacement process. This can be done by pulling the two sides of the throttle parting apart from each other. The throttle trigger can be removed as well as the back cover. Once that's complete, the throttle cable can be taken out. Pass the new cable through the hole in the carburetor mounting plate and the engine housing. Reassembly before use.This throttle cable is sold as an individual component. It is a genuine OEM replacement part that is directly sourced from the manufacturer. The cable is made to fit string trimmers and edger trimmers manufactured by Weed Eater and Craftsman.

This cylinder is a genuine Husqvarna part. It is made as a part for trimmers, weed-whackers, blowers, and hedge trimmers. The holes on this cylinder head are not threaded. Removing or replacing the cylinder can be an important part of piston repair on machines such as these. As with most repairs, use basic precautions such as disconnecting the spark plug to prevent accidental powering on, emptying the fuel tank, and letting the engine cool completely.Replacing the cylinder is a relatively simple repair, but it entails disassembly of the blower/weed-wacker/trimmer itself, which is a more involved process. Be sure to have the proper safety equipment and tools. Typically, cylinders do not need to be replaced, but sometimes they can become damaged in an accident or worn from frequent use.This cylinder is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is manufactured for compatibility with machines made by Craftsman, Husqvarna, Jonsered, Poulan, and Weed Eater, though may also work with similar products from other brands.

This muffler bolt is an OEM replacement part that is sourced directly from the manufacturer. These bolts secure the muffler cover to the muffler on chainsaws, trimmers, and other small engines found in lawn and garden machines. Regular use can cause the bolts to loosen and possibly fall out of the cover. The muffler cover requires two bolts to secure it. These bolts have a hexagon-shaped head and require a hex key or Allen wrench to install or remove them from the cover.The muffler on small engines softens the noise coming from the machine. Being exposed to loud noise for long periods can lead to hearing damage. The muffler helps lessen this risk. The muffler cover protects the inner parts of the muffler. Rain, snow, dirt, and debris can cause rust and corrosion. Use the Allen key or hex wrench to loosen the muffler bolt if it is rusted or bent. Install the new bolt and tighten it using the hex wrench. The muffler bolt is made of high-quality steel and it sold as an individual part. The muffler cover requires two bolts to secure the cover. This bolt is compatible with chainsaws, hedge trimmers, and other small engines manufactured by Poulan, Weed Eater, and Husqvarna.

This OEMspark arrestor kit includes all the parts needed to replace the spark arrestor. The spark arrestor is a device that prevents the emission of hot exhaust, hot particles, and hot debris (that could be flammable) from being expelled from an internal combustion engine.The spark arrestor contains a screen that may become clogged through normal use. Common signs that the spark arrestor screen may be clogged are a lack of power during use, poor acceleration, and engine misfires. Carbon may build up on the screen, which causes these problems. The operator may be tempted to try cleaning the screen, but it is not recommended; the failed part needs to be replaced.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on other Husqvarna produced hedge trimmers, weed whackers, lawnmowers, chainsaws, snow throwers, power cutters, and leaf blowers manufactured by Craftsman, Poulan, Poulan Pro, Weedeater, AYP, Jonsered, McCulloch, and RedMax.

The fuel line pickup assembly includes the fuel filter and fuel line. This line carries the fuel to the carburetor, passing it through the filter on the way to remove any impurities that may be in the fuel. This ensures optimal performance and keeps the carburetor in good condition and free from debris and other buildup. Over time, the filter and line can become clogged. Typically, fuel filters are a part of routine maintenance, but they can also fail intermittently from a clog or other issue. In some cases, it may be best to replace the entire pickup assembly. This genuine fuel line pickup assembly is an OEM manufacturer replacement part from Husqvarna. It is designed to be used on select models of hedge trimmers from Poulan, Craftsman, Weed Eater, and Husqvarna. The part should be installed in a well-ventilated area and fuel should always be drained before working on the carburetor or other fuel line parts. Disconnect the spark plug before beginning repairs and be sure to wear gloves for hand protection.