Snow Removal Equipment Gasket & Seal

This is a replacement carburetor gasket. The gasket plays an important role in the carburetor. It helps to ensure that there is no additional air getting into the carburetor. It also ensures no dirt or other debris makes it into the carburetor. If the gasket is not working properly or has been damaged, air and other elements that get into the carburetor could cause the engine to run rough. It could also make it more difficult to start the engine.Over time, the carburetor gasket will wear down and will need to be replaced. Gaskets will dry out and crack the longer they've been used. There is also the possibility that the gasket has not been seated properly, which would require repair. Whenever owners are servicing the carburetor, they should make it a point to replace the gaskets, even if they appear to be in serviceable condition.This gasket is an OEM replacement part sourced directly from the manufacturer. It will work for certain models of carburetors from Tecumseh and Craftsman. Each of the gaskets is sold individually.

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

This replacement oil seal is an authentic OEM part for a wide range of snow thrower engines. As its name suggests, this part seals oil into the engine. More specifically, though, this oil seal is used in the crankshaft and camshaft. These two parts are responsible for translating reciprocal motion, and as such, they experience a lot of jostling. To keep from rubbing and creating friction, they require a lot of oil. So that the oil does not leak, they are sealed with oil seals. After prolonged exposure to hot oil, oil seals will begin to degrade and lose their ability to tightly seal off a shaft. When this happens, oil will leak from the engine and those parts will begin to rub against each other. As more and more friction builds up, the engine will start to quickly overheat and burn oil. Since these seals are located deep inside the engine, be prepared to follow the owner's manual on how to access and reassemble the cam and crankshafts. This replacement oil seal is a high-quality part designed to match the specifications of Toro, Tecumseh, Lawn Boy, and Husqvarna appliances. It comes sourced from its original manufacturer and does not include and additional hardware.

A gasket provides a mechanical seal between two mating surfaces to prevent leakage. This carburetor gasket, in particular, is designed to deliver an airtight seal for the carburetor so that air won't seep into where it shouldn't be. This gasket is essential for the proper functioning of the carburetor and the engine. A small engine is sensitive to minor changes in airflow, and an air leak would cause misfiring, engine vibration, and overheating. Over time, a gasket may wear out and begin to crack. Use this manufacturer-sourced gasket made from high-quality material as a replacement. This part is an original OEM replacement part that works with specific models of snowblowers, generators, and small engines from Tecumseh, MTD, Simplicity, Briggs & Stratton, Cub Cadet, Craftsman, and Toro. It is sold individually.

This cylinder head gasket is an original OEM part sourced directly from the manufacturer, Tecumseh. It is sold individually. A cylinder head gasket is an important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a snow blower, a generator, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Tecumseh, and Simplicity.The cylinder head gasket part is crucial because it serves as the seal between the engine block and cylinder head or heads. Its purpose is to seal the combustion gases within the cylinders, thereby avoiding leaking of coolant or engine oil into the cylinders. Leaks in the head gasket can be problematic because they prevent the engine from running properly and often lead to overheating.The replacement or repair process of the cylinder head gasket should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This breather gasket is made of durable but flexible plastic, designed to seal the cylinder block and the breather body. A breather is a pipe that enables internal combustion in the engine to properly vent any crankcase pressure out of the engine. It is essentially a venting pipe or system and ensures that the engine's piston rings seal tighter against the cylinder walls (however many there are in that engine). When this gasket dries out, that pressure and seal cannot be created effectively and the engine may malfunction. Replacing the breather gasket means using a wrench to disassemble the breather, clean the surfaces, remove the original gasket, and use this authentic replacement part before reassembling This is an OEM replacement part designed for Toro, Tecumseh, Lawn-Boy, MTD, and Husqvarna equipment, including snowblowers and other small engine systems. This item ships individually.

This head gasket is designed for use in the engine of lawnmowers and snow blowers. It is created to separate the engine block from the cylinder head and acts as a regulator to keep the mower in good working order. The head gasket prevents oil and coolant from mixing together by sealing in the internal combustion process. If the seals of the gasket weaken or the gasket head blows, the lawn and garden tool will no longer operate at the appropriate power level. Having low engine power in a lawnmower or snow blower is one indication that the head gasket is damaged or no longer working. This can be caused by lack of maintenance, wear and tear, worn seals, or insufficient amounts of oil. A compression test will need to be done to determine whether this is the problem. If the head gasket has a crack, loose bolts, or compromised seals, it will need to be replaced. This head gasket is designed for use with engines, lawnmowers, and snow blowers manufactured by Husqvarna, Tecumseh, Craftsman, and Toro. This is an individual genuine OEM component that comes directly from the manufacturer.

This is an authentic oil pan gasket replacement that has been sourced from the manufacturer. It can be used with many types of lawn and garden machines. The gasket is used as a means to help seal the oil pan to the bottom of the engine block. This helps to ensure that there is no oil leakage when the oil moves back and forth from the pan to the engine. Oil leaks are a major sign of a problematic oil pan gasket. Although the gaskets are made from quality material, they will need to be replaced on occasion. Over time, the gaskets can start to stretch or wear thin. They may start to dry out or crack and break away. This would allow for oil leaks to start. Small leaks could start to degrade the gasket further. The gasket should be replaced whenever the owner is performing maintenance on the machine and changing out the oil and the oil filter. The genuine OEM oil pan gasket is sold individually. It can be used with more than 150 models of snowblowers, generators, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, and MTD.

This genuine OEM intake manifold gasket is found on lawnmowers, snowblowers, and other lawn and garden equipment. The intake manifold gasket protects the carburetor from debris and containments that would affect the engine performance. If the engine misfires, surges, won't start, or is running hot; the intake manifold gasket could be causing the problem. Normal wear and tear can cause the gasket to tear or have debris buildup and need to be replaced.The manifold intake gaskets need to be inspected and replaced on a regular basis even when there is not an engine issue. If the motor is misfiring or overheating, the intake manifold gasket is one place to check. Empty the fuel tank and make sure there is no fuel in the carburetor. Disconnect the spark plug and remove it from the engine. Make repairs in a well-ventilated area. Remove the old gasket and clean the area to ensure a tight fit when the new ones are installed. This manifold intake gasket is sourced directly from the manufacturer and sold as an individual part. It is compatible with lawnmowers, snowblowers, tillers, and pressure washers manufactured by Craftsman, Toro, and Tecumseh.

Cylinder head gaskets are part of internal combustion engines found in snow blowers and other lawn equipment, such as riding lawnmowers. They create a seal for the gas in the cylinder, and prevent coolant and oil from getting into the other cylinders. Even with regular use, cylinder head gaskets can fail. The result is a loose, worn, or damaged component that can no longer perform its job. Signs the cylinder head gasket has gone bad include leaks, overheating, and poor engine performance. A replacement part and repair are required to ensure the continued operations of the device.Replacing a cylinder head gasket requires protective gloves and the proper tools. The technique for replacing a damaged or worn cylinder head gasket will vary depending on the engine's location and the particular gasket that has to be exchanged.This cylinder head gasket is an authentic OEM replacement part. It is supplied by the manufacturer and sold individually. It is compatible with both Tecumseh and Toro snowblowers, lawnmowers, and various cycle horizontal engines. It is made of high-quality, durable material.