Parts for Poulan PP2822: Starter Housing / Cylinder / Muffler Parts

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective, stripped, or misplaced screw in outdoor power equipment.Screws are a standard piece of hardware that are intended to secure components within the equipment. Over time they may become stripped, corroded, lost, or otherwise broken and will require replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular screw, reference the owner's manual or equipment diagrams for specific instructions and part location.This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This screw can be used with outdoor power equipment manufactured by Husqvarna, Poulan, and other brands.

A new rope kit may be necessary if the original rope becomes deteriorated or frays with regular equipment use.This rope is part of the recoil starter assembly, an essential component that enables the motor to be pull-started. Due to frequent usage and wear and tear, the rope can easily fray. Without this rope the engine cannot be manually pull-started. It is manufactured from durable nylon.This Husqvarna rope kit is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement Husqvarna rope kit fits various different models of Husqvarna, Poulan, and Craftsman blowers, trimmers, and hedge trimmers. Please note this is sold individually. Handle grip not included.

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

This starter spring is a genuine Husqvarna part, sold individually. This starter spring can be used as a replacement part in a leaf blower or a hedge trimmer. The purpose of the starter spring in a leaf blower or a hedge trimmer is to function within the pull-start mechanism of the appliance so that when the starter rope is pulled, the pulley and the starter spring work in conjunction to allow the rope to trigger the powering the appliance.The starter spring in a leaf blower or a hedge trimmer might need to be replaced if it has been warped, snapped or otherwise damaged. If this occurs, the starter spring should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This starter spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This part is a replacement recoil starter assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective recoil starter assembly in hedge trimmers.The recoil starter assembly helps the engine to start up by spinning the crankshaft when the user pulls the rope. This part is critical, and if it is faulty in any way, the trimmer may not be able to start. Thus, when damaged, this part should be immediately replaced. When working on or near an engine it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this recoil starter assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This recoil starter assembly can be used with different models of hedge trimmers that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

A combustion engine will create a lot of pressure by igniting fuel and air with a spark. It features pistons beneath the valves and the cylinder block. Between these areas are the piston rings that have many purposes that include keeping gas compression between the piston and the wall of the cylinder, keeping a layer of lubrication on the inside of the engine, allowing adequate heat transfer, and supporting the piston inside the cylinder. This replacement piston ring is designed for use in a long list of edgers, trimmers, and blowers. It is compatible with Husqvarna, Poulan, and Craftsman machines. This is an OEM replacement part that will require a complex set of steps to install properly. It will require the use of torque wrenches, plug wrenches, pliers, screwdrivers, a mallet, and more to do the repair. It ships individually.

This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.

This clutch kit is a genuine Husqvarna part. It is designed for 2 cycle engines. When the trimmer speed changes from idle to run, the clutch attaches to the crankshaft and engages the drive components, causing the trimmer head to rotate, which is what makes this tool effective. It is normal for the clutch on a trimmer to wear out over time; when it is time to replace the clutch, the trimmer head will not rotate properly and may not rotate at all. The engine will not start. This clutch kit includes both the clutch itself and the clutch gasket. It is a genuine OEM part sourced from the manufacturer.This clutch kit is designed and manufactured to be compatible with a gas-powered hedge trimmer made by Poulan, model number PP2822, the Poulan Pro 22-inch 2 cycle dual sided hedge trimmer. It may also fit other hedge trimmers and appliances that are compatible with Husqvarna parts, including AYP, Craftsman, RedMax, Jonsered, Weed Eater, and McCulloch.

This is a high-quality flywheel assembly that is a component of many leaf blowers from top manufacturers. It is located on the crankshaft inside the leaf blower. The flywheel assembly is fitted with magnets on the side to create an electric charge when passing the ignition module. The charge goes to the spark plug, where it fires the mixture of fuel and air in the cylinder. If the key on the flywheel is damaged or broken, it can cause engine misfires. It may also cause the engine to be unable to start. In this situation, the flywheel assembly will need to be replaced. Basic tools and a pair of work gloves are needed to replace the flywheel assembly. Place the tool on a level surface, power it off, and disconnect the spark plug wire. Disassemble the tool to gain access to the flywheel so it can be removed. The new component can be placed in the same location before reassembling the other parts.The flywheel assembly is sold as an individual part. It is made to be compatible with leaf blowers manufactured by Craftsman, Husqvarna, and Poulan. This is an authentic OEM replacement component that is sourced directly from the manufacturer.

This part is a replacement air filter cover. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective air filter cover in hedge trimmers.The air filter cover helps to protect the air filter itself from unnecessary damage caused by dirt, debris, or the elements. If the filter is damaged, the engine may also become damaged, so the air filter cover should be replaced if rendered ineffective. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this air filter cover, the appropriate owner's manual and equipment diagrams should be referred to. This air filter cover is a genuine OEM part made of durable plastic and is sold individually. It is suitable for use with hedge trimmer models that have been manufactured by Husqvarna, Poulan, and other brands.

This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.

This replacement part is an air filter support and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. The air filter support is commonly found in hedge trimmers and provides support to the air filter. The air filter support ensures that the filter stays attached to the appliance and that it is working properly. A new air filter support might be needed if the current one is damaged or broken in any way. It is possible that the air filter support might need to be replaced after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This replacement carburetor kit is a genuine OEM parts kit for Craftsman hedge trimmers. The carburetor takes gasoline from the fuel line and mixes it with air from the intake valve to make a balanced fuel that is ready for combustion. Depending on how much fuel or air pass into the carburetor, the engine may run faster or slower. The most common reason for a carburetor to break down is if it is clogged with engine gunk. While it is sometimes possible to clean out a carburetor, if left for too long, the damage can be irreparable and the part will need replacing. First, remove the air filter and filter housing using a socket wrench. This will give access to the damaged carburetor and make it easier to unhook from the links that hold it in place. Be sure to set the gaskets firmly in place and then reassemble with the new part. This replacement carburetor is designed for use only with Craftsman appliances. It comes sourced directly from the original manufacturer and includes a carburetor and two gaskets.

This screw is a genuine Husqvarna part. A screw can be used as a replacement part in leaf blowers, hedge trimmers, and chainsaws. The purpose of this genuine OEM part is to rotate into one or more components so that the stability of those components is maintained within the internal or external machinery of one of these appliances.The screw is a small fastening component that can be easily lost or misplaced at any point during the standard lifespan of an lawn equipment due to its size. The screw can also be subject to damage that can necessitate a complete replacement with this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with equipment manufactured by Husqvarna, Craftsman, Poulan, Poulan, Pro, and Snapper.

Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.

This replacement part is a fuel line kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in appliances such as line trimmers and edgers. This part helps the user in determining how much fuel is present in the appliance and if they need to top it off prior to use. A new fuel line kit might be needed if the current one is damaged or missing. Be sure to wear work gloves during this replacement as fuel can get on the hands and become dangerous. Be sure the engine is powered off before attempting this repair. This fuel line kit is sold as a single kit and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This replacement part is a fuel line kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in appliances such as line trimmers and edgers. This part helps the user in determining how much fuel is present in the appliance and if they need to top it off prior to use. A new fuel line kit might be needed if the current one is damaged or missing. Be sure to wear work gloves during this replacement as fuel can get on the hands and become dangerous. Be sure the engine is powered off before attempting this repair. This fuel line kit is sold as a single kit and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This replacement part is a fuel line kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in appliances such as line trimmers and edgers. This part helps the user in determining how much fuel is present in the appliance and if they need to top it off prior to use. A new fuel line kit might be needed if the current one is damaged or missing. Be sure to wear work gloves during this replacement as fuel can get on the hands and become dangerous. Be sure the engine is powered off before attempting this repair. This fuel line kit is sold as a single kit and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This replacement part is a fuel line kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in appliances such as line trimmers and edgers. This part helps the user in determining how much fuel is present in the appliance and if they need to top it off prior to use. A new fuel line kit might be needed if the current one is damaged or missing. Be sure to wear work gloves during this replacement as fuel can get on the hands and become dangerous. Be sure the engine is powered off before attempting this repair. This fuel line kit is sold as a single kit and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This replacement part is a fuel tube grommet and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in appliances that require fuel and assists the tube in staying in place and secure. This grommet is very small but an important part of the overall operation of the appliance. A new fuel tube grommet might be needed if the current one is visibly damaged or missing. It is not unusual that grommets become stripped or worn down over time due to normal wear and tear. It is suggested that the user replace this part as soon as an issue arises. Be sure the engine is powered off. This replacement should be fairly easy and should only require common tools. This fuel tube grommet is sold individually. This part is a genuine OEM replacement part and it sourced directly from the manufacturer.

This is a fuel cap that is used with several types of small engine lawn and garden equipment. The purpose of the fuel cap is to make sure that all gasoline in the fuel tank stays in place and there are no leaks present. The fuel cap can experience wear and tear over time or become cracked, broken, or damaged if it impacts other items. If fuel can be smelled through the cap, if the cap doesn't tighten, or if it is otherwise visibly damaged, the fuel cap should be replaced.Prior to replacement or even removing the fuel cap, the equipment should be placed in a well-ventilated area. It's also important to disconnect the spark plug wire to create a safe environment. Empty any fuel in the tank into an appropriate container before moving on. Once empty, you can replace the old cap with a new one.This is a genuine OEM replacement component that is directly sourced from the manufacturer. It is sold as a single fuel cap. The part is created to be compatible with string trimmers, hedge trimmers, and leaf blowers manufactured by Poulan, Poulan Pro, and Craftsman.

This is a fuel cap that is used with several types of small engine lawn and garden equipment. The purpose of the fuel cap is to make sure that all gasoline in the fuel tank stays in place and there are no leaks present. The fuel cap can experience wear and tear over time or become cracked, broken, or damaged if it impacts other items. If fuel can be smelled through the cap, if the cap doesn't tighten, or if it is otherwise visibly damaged, the fuel cap should be replaced.Prior to replacement or even removing the fuel cap, the equipment should be placed in a well-ventilated area. It's also important to disconnect the spark plug wire to create a safe environment. Empty any fuel in the tank into an appropriate container before moving on. Once empty, you can replace the old cap with a new one.This is a genuine OEM replacement component that is directly sourced from the manufacturer. It is sold as a single fuel cap. The part is created to be compatible with string trimmers, hedge trimmers, and leaf blowers manufactured by Poulan, Poulan Pro, and Craftsman.