Parts for Kenmore Elite 72214307910: Sump Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Factory replacement lower frame trim that mounts to the base of your dishwasher door. Restores proper fit and finished appearance when original is cracked, bent, or damaged.

Dishwasher not dispensing detergent or rinse aid? This detergent dispenser assembly restores proper soap release. Remove inner door panel to access.

Secures dishwasher to countertop or cabinet to prevent tipping. Includes mounting brackets for stable installation. Replace if broken, missing, or worn.

Fixes leaks from the middle or bottom of your dishwasher during wash cycles. This complete sump assembly restores proper drainage. Basic difficulty repair.

Small sleeve bushing that supports pivoting or rotating joints in your dishwasher. Replace when worn, cracked, or causing excess friction between moving parts.

Replace your dishwasher door hinge spring to restore proper tension and alignment. Fixes sagging or uneven door movement for a reliable seal. Confirm fit.

Door cable connector assembly for dishwashers. Guides and supports the door through opening and closing motions. Replace if cracked, broken, or worn.

Supports the drum for smooth, quiet rotation. Replace when you hear squeaking, thumping, or notice wobbling during cycles. Verify fit with your model number.

Lower rack roller for dishwashers. Mounts to the bottom rack assembly to allow smooth gliding in and out. Replace if cracked, broken, or worn down.

Fixes AE error codes and incorrect water fill issues in dishwashers. This sensor monitors tub water levels to optimize washing performance and fill.

Fix ice maker not filling or water dispenser leaking with this check valve. Prevents backflow in the water supply line. DIY-friendly repair part.

Fix NE error code or weak spray arm pressure with this diverter motor. Controls water flow to spray arms. Moderate DIY repair, about 1 hour install.

Dishwasher won't start or stops mid-cycle? This door micro switch detects secure closure before cycles begin. Direct fit repair for door latch issues.

Fix uneven cooling and temperature fluctuations in your refrigerator. This air damper assembly controls airflow between compartments to restore proper cooling.

Dishwasher not draining, making loud humming or whining noises, or showing HE error code? The circulation pump assembly is likely the issue. DIY-friendly.

Exterior door panel for dishwashers. Covers and protects internal door components while providing finished appearance. Replace if cracked, dented, or worn.

This lower access cover is the factory replacement panel that secures and protects components at the base of the appliance while restoring the cabinet's appearance. It provides a durable service access point for routine maintenance. What it does:

• Protects controls, wiring and components located behind the lower front of the appliance from dust and debris
• Restores a clean, finished look when the original cover is cracked, broken or missing
• Provides the correct access opening and mounting points for service and inspection
• Stops rattling or vibration caused by a loose or damaged lower panel

• Disconnect power to the appliance before starting any service
• Remove the old lower cover by loosening the retaining screws or clips, then align new cover tabs before fastening
• Use the original mounting hardware when possible; hand-start screws to avoid cross-threading and tighten snugly — do not overtighten
• Inspect and repair adjacent components or mounting points before installing the new cover

Supports and aligns the freezer drawer for smooth gliding. Replace if drawer sticks, sags, or seals poorly. Confirm fit with your model number.

Water inlet hose channels supply water into your dishwasher for proper filling. Replace if leaking, cracked, or loose to restore secure connection. Verify fit with your model number before ordering.

Fix poor cleaning or dishes not getting clean with this dishwasher spray arm nozzle assembly. Restores proper water spray pattern. Moderate DIY repair.

Snap-on trim cap that covers exposed fasteners or openings in your dishwasher. Replaces cracked, broken, or missing caps to restore a finished look.

Fix a dishwasher that won't drain or squeals during draining. This drain pump case assembly houses the pump that removes water during the drain cycle.

Dishes not getting clean or spray arm not rotating? This nozzle shaft distributes water to spray arms. DIY-friendly fix with minimal effort needed.

Seals the fill funnel to prevent water leaks in your dishwasher. Replace if you notice water pooling or leaking during cycles. Verify fit with your model.

Fixes poor cleaning and spotty dishes caused by weak water spray. This dishwasher spray nozzle assembly restores proper water distribution. Moderate DIY.

Fix poor cleaning or weak spray with a new dishwasher spray arm manifold. Distributes water to all spray arms for complete dish coverage. DIY repair.

Captures food particles and debris to maintain proper water flow. Replace when clogged or damaged to restore filtering performance. Confirm fit with your model.

Reduces sediment, chlorine taste and odor in your refrigerator's drinking water and ice. Replace every 6 months for best performance. Confirm fit with your model.

Replace your dishwasher's bent, damaged, or worn wire rack shelf. Restores secure storage and smooth gliding for dishes, pans, and cookware inside the tub.

Cracked or broken control panel housing? This case assembly secures and protects internal control components while restoring a finished look to your unit.

Dishwasher won't start or runs with door open? This door safety switch assembly detects door position to ensure cycles only run when closed.

Parts assembly for dishwashers. Replaces damaged, broken, or missing assembly components. Essential for restoring proper function and appearance.

Prevents water leaks by sealing the dishwasher door. Replace if you notice moisture escaping or reduced cleaning performance. Confirm fit with your model.

Cap assembly for dishwashers. Replaces worn, cracked, or missing cap components. Direct replacement part restores proper coverage and protection.

Dishwasher not starting or responding to controls? This control assembly restores normal operation. Common repair for failed control systems.

Fix a top rack that won't slide in completely or sticks when pulling out. This rail assembly supports and guides the upper dish rack smoothly in and out.

Holds utensils and small items upright in your dishwasher's lower rack. Replace if the basket is cracked, broken, or missing prongs that no longer secure items.

Fix poor drying or weak airflow in your dishwasher with a new blower motor casing assembly. Houses motor, fan, and wax motor for proper ventilation.

Dishwasher holder secures components in place. Replace if cracked, broken, or missing to restore proper assembly and prevent rattling or movement.

Holder component for dishwasher interior mounting. Replaces broken, cracked, or missing holders that secure internal parts in place.

Fix a dishwasher door that won't stay closed or a machine that won't start. This door latch lock assembly restores secure closure for safe operation.

Fix a dishwasher door that won't close or latch properly with this door latch holder. Secures the lock assembly for reliable door engagement and safe operation.

Stopper roller guides and cushions dishwasher panels for smooth, quiet operation. Replace if door binds, rubs, or moves unevenly. Confirm fit with your model.

Dishwasher not powering on or controls unresponsive? This wire harness restores electrical connectivity between components. Direct replacement part.

Lower cover assembly for dishwashers. Protects internal tub mechanisms. Replace if cracked, dented, or damaged. Includes gasket and mounts with screws.

Seals the opening between dishwasher door and tub to prevent leaks. Replace when worn, cracked, or leaking. Verify fit with your model number.

Dishwasher making loud fan noises or blowing air inefficiently? This blower cover directs airflow and protects internal fan components. DIY-friendly fix.

Replace your dishwasher's duct assembly if cracked, broken, or missing. This duct channels air during the drying cycle. Direct-fit component.

Replacement drain hose assembly for dishwashers. Routes wastewater from the tub to your home's drain system. Replace if cracked, kinked, or leaking.

Creates a watertight seal around the dishwasher tub opening. Replace if you notice leaks, excess noise, or poor wash performance. Confirm fit with your model.

Connects water hoses in your dishwasher's internal plumbing. Replace this connector if it's cracked, leaking, or worn to restore secure water flow.

Holder component for dishwashers. Secures internal parts in place during wash cycles. Replace if cracked, broken, or missing to restore proper fit.

Fix dishwasher electrical issues with this wire harness connector assembly. Restores secure electrical connections between internal components.

Drain hose assembly directs wash water from your dishwasher to the drain or disposal. Replace if cracked, leaking, kinked, or disconnected.

Replace your dishwasher's broken or missing holder. This structural component secures parts in place during operation. Essential for proper assembly.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Replace your refrigerator door hinge to restore proper alignment and smooth operation. Fixes sagging doors and sealing issues. Confirm fit with model number.

Lower rack assembly for dishwashers. Holds dishes and cookware during wash cycles. Replace if bent, warped, cracked, or damaged from heavy loads.

Supports and pivots your refrigerator door for smooth opening and secure closing. Replace when door sags, misaligns, or won't seal properly. Confirm fit with your model number.

Replacement roller for dishwasher lower rack. Installs on the dishrack axle to enable smooth gliding. Replace if cracked, broken, or missing.

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This supporter hinge is a replacement hinge support bracket that helps secure and align the appliance door so it opens and closes smoothly. It restores proper hinge positioning to reduce door sag and uneven sealing. What it does:

• Secures the door hinge assembly and provides a stable mounting point
• Helps maintain door alignment to improve sealing and reduce gaps
• Reduces door sag and uneven wear on hinge components
• Restores smooth door movement and consistent closing

• One supporter hinge / hinge support bracket

• Disconnect power to the appliance before starting any repair
• Remove the door per the service manual instructions to access the hinge support
• Use appropriate hand tools and keep fasteners organized for reassembly
• Do not overtighten mounting screws; adjust hinge alignment as needed after installation

Replacement holder for dishwasher interior. Secures components in place. Needed when original is cracked, broken, or missing. Direct fit part.

Dishwasher holder component that secures parts in place during operation. Replace if broken, cracked, or missing to restore proper assembly and fit.

Upper dishwasher rack holds dishes, glasses, and small items during wash cycles. Replace if cracked, broken, rusted, or missing tines affect loading.

If your dishwasher stopped working due to worn internal components, this parts assembly restores full function. Replaces damaged sub-assembly parts.

Parts assembly for dishwashers. Replaces broken, damaged, or missing components. Check your model number for proper fit and compatibility.

Replace worn drum support rollers to eliminate grinding noise and restore smooth drum rotation. Supports even spinning during cycles. Confirm fit with model.

Dryer making loud thumping or squealing noise? A worn drum support roller causes noise and poor rotation. This roller assembly restores smooth, quiet operation.

Fix a dishwasher with no power or won't turn on. This noise filter assembly repairs electrical interference issues. DIY-friendly repair part.

Lower dish rack assembly for your dishwasher. Replaces cracked, broken, or worn racks that no longer hold dishes securely. Direct fit replacement.

Replace a cracked, bent, or missing wire rack assembly in your dishwasher. Restores organized storage and stable support for dishes and cookware.

This is a replacement interior tray that holds items and helps contain spills and crumbs inside the appliance. It restores a stable surface where the original tray was cracked, warped, or missing. What it does:

• Provides a flat, stable surface for cookware, food containers, or components
• Helps catch drips, crumbs, and minor spills to keep the appliance interior cleaner
• Replaces damaged, cracked, or warped trays that no longer sit level
• Restores proper part alignment so other components that rest on the tray function correctly

• One replacement interior tray

• Handle carefully to avoid scratching or chipping; wear gloves if needed
• Disconnect power to the appliance before working in or around electrical components
• If any mounting clips or fasteners are missing or damaged, replace them per the OEM manual

Dishwasher won't start or lock? Flashing lights during cycle? This door latch assembly with safety switches fixes door sensing issues. Moderate DIY repair.

Replace your dishwasher door gasket to stop leaks and restore a watertight seal. Install when water escapes during cycles. Confirm fit with your model.

Replaces worn or damaged outer door frame trim on your dishwasher. Restores proper alignment, sealing, and finished appearance. Confirm fit with your model.

Replace your cracked, bent, or missing refrigerator shelf rack to restore secure storage space. This rack installs inside the fridge compartment.

Replace your dishwasher's broken or rusted wire rack assembly. This structural component provides stable dish positioning and proper water circulation.

Upper rack assembly for dishwashers. Holds dishes, cups, and utensils during wash cycles. Replace if cracked, broken, or missing tines and wheels.

Restore the second-level cooking surface inside your microwave. This interior cooking rack sits on the factory support hooks to elevate dishes for certain cycles, replacing a lost, bent, or chipped rack so cookware stays level and heats properly. What it does:

• Creates a second cooking level when your model calls for it
• Elevates dishes above the turntable for multi-item reheating or convection/grill use
• Replaces a rack that is missing, bent/wobbly, or has damaged coating that may cause arcing
• Seats in designated support positions to maintain proper clearances

• 1 cooking rack

• Disconnect power before cleaning or servicing; handle carefully to avoid chipping the coating
• Position only on the designated support hooks; ensure it is level and not touching cavity walls
• Use strictly as directed in your model's owner's manual
• Discontinue use and replace if arcing occurs or the rack is damaged

Upper dish rack assembly for dishwashers. Holds cups, glasses, and small items during wash cycles. Replace if cracked, broken, or wheels are worn.

Upper dishwasher rack holds dishes and glassware securely during wash cycles. Replace when damaged, cracked, or wheels no longer glide smoothly.

Lower dish rack for dishwashers. Holds plates, bowls, and cookware during wash cycles. Replace if cracked, broken, or rollers are damaged.

Replace broken or missing tines in your dishwasher's dish rack. This component supports and secures dishes during wash cycles. Easy replacement part.

Replace a bent, worn, or missing dishwasher wire rack. Restores a stable, level surface for dishes and cookware. Essential when original is damaged.

Fix water leaks or dispenser flow issues with this dishwasher water guide. Directs water flow to prevent misdirection. Simple plastic channel replacement.

Replace your damaged or missing dishwasher rack wire. This wire assembly installs inside the rack to provide support for dishes and glassware.

Dishes not getting clean or water not spraying properly? This dishwasher nozzle assembly sprays water during wash cycles. Moderately easy DIY repair.

Replacement wire rack for your dishwasher. Provides secure support for dishes and cookware. Install when original rack is cracked, bent, or missing.

Support bracket that secures internal components to the dishwasher chassis. Replace if bracket is cracked, broken, or missing to restore proper alignment.

Dishwasher not filling with water or showing IE error? The water inlet valve controls water flow into the tub. Easy DIY replacement in under an hour.

Replacement parts assembly for dishwasher. Install to replace broken, cracked, or missing components. Restores proper structure and appearance.

Fixes uneven cooling between freezer and fresh food sections. This air damper assembly regulates airflow to restore proper temperatures in both compartments.

Right side dish rack rail assembly for LG dishwashers. Supports and guides rack extension and retraction. Replace if cracked, broken, or worn smooth.

Fix a refrigerator that won't cool, has display errors, or isn't responding to controls. This control board module regulates temperature and functions.

Wire harness for dishwashers. Connects electrical components inside the unit. Replace if wires are damaged, frayed, or connections are broken.

Replace your dishwasher's damaged or broken wire harness. This electrical component connects internal wiring systems. Order when harness is frayed or worn.

Replace the wire harness in your dishwasher. This internal wiring component connects electrical systems and may need replacement if damaged or frayed.

Cabinet base for dishwasher. Installs at bottom of unit to provide structural support. Replace if cracked, damaged, or corroded. Essential component.

Dishwasher buttons not responding or display blank? This control board assembly restores front panel functions. Moderate DIY difficulty repair.

Adjustable leveling leg installs under dishwasher to elevate unit and ensure proper drainage. Replace if cracked, broken, or missing for stability.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.