Tecumseh Engine Parts

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

Flywheel keys are a component of lawnmowers and other small machines for use in the lawn and garden. The flywheel key makes sure the flywheel stays in the appropriate position relative to the crankshaft and the piston. If a lawnmower hits a rock or other item in the yard, it can cause damage to the flywheel key and the part may need to be replaced. The first step to determining the issue is inspecting the flywheel key visually. Remove the flywheel and look at the key and the slot on the crankshaft known as the keyway. The soft metal might be damaged and need to be replaced. Look for cracks and breaks in the metal. It should be smooth and clean without burrs. It also should not wobble when the flywheel is attached to the crankshaft. If it needs to be replaced, remove the spark plug lead and bolts holding the shroud to reach the component.This flywheel key is a genuine OEM component sourced directly from the manufacturer. It is available as an individual part. The key is designed for use with lawnmowers and wood chippers made by Lawn-Boy, Toro, Tecumseh, and Cub Cadet.

Carburetors must have tight seals to prevent too much air from getting into the carburetor at one time. If there are issues with a welch plug, it could cause an engine to lose power or to run rough. The plug might have lost its seal, it could have cracked, or it could have become lost. Sometimes, the vibration of the engine is enough to cause a plug to fall out if it is not tightly sealed. A loose fit will cause problems with the flow of fuel. This genuine OEM welch plug is sold individually and can help to seal your carburetor so your engine retains power. The part can be used with a range of lawn tractors, lawnmowers, snowblowers, and small engines. Compatible brands include Tecumseh, Lawn-Boy, Toro, Craftsman, and MTD.

This is a genuine throttle return spring used on select small engines. The throttle return spring is part of the throttle system. It is attached to the throttle cable and the throttle body or carburetor, and is responsible for pushing the throttle closed when the gas is released and opening the throttle when the throttle trigger is engaged. If the spring is faulty, the throttle will not be able to open and close properly. This can affect the machine's ability to operate and even prevent it from operating at all if the throttle remains closed and no power can get through. A replacement should be done as soon as possible to prevent further damage to the engine. This genuine OEM throttle return spring is manufactured by Tecumseh, and compatible with machines from Toro, Husqvarna, MTD, Lawn Boy, and Tecumseh. There are over 150 models that can use this replacement part. It is made of durable metal and sold as an individual part. This throttle return spring is a simple replacement that should only take a few minutes. Be sure to use care when replacing the spring because it can be susceptible to damage under excessive pressure or strain.

This is a genuine OEM carburetor sourced directly from the manufacturer designed for use in tillers and other small engines. The carburetor controls the mixture and gas and air that reaches the engine at different speeds. Regular use for prolonged periods can lead to the carburetor's failure, resulting in a sluggish engine and reduced fuel economy. A buildup of debris in the carburetor can also cause failure due to clogged airways preventing fuel from reaching the engine. Replacing the carburetor will solve these problems and is much less costly than buying entirely new equipment. Replacing the carburetor requires less than hour of work and a screwdriver, socket or wrench set, and clean basin. Remove the spark plug from the engine and drain the fuel into the clean basin. Locate the air filter and remove it. Remove the fuel line and crankcase. Remove the carburetor from the engine. Install the new carburetor. Reinstall the parts in reverse order. Start the engine and test the carburetor. This is a carburetor made of heavy-duty metal and molded plastic parts; it is sold as an individual pre-assembled unit. The carburetor is compatible with tillers and other small engines manufactured by Toro, Tecumseh, Cub Cadet, and Craftsman.

This dampening spring float is for use in lawn and garden carburetors. It is a vital component that prevents flooding in the carburetor, particularly if the equipment is going over rough terrain or is otherwise unstable.When replacing a missing or damaged spring float, be sure to refer to the manual and diagrams for the carburetor it is being installed in. Location and application of this hardware will vary based on the model of the carburetor.This dampening spring float is a genuine OEM part sourced directly from the manufacturer. It is sold individually. The manufacturer is Tecumseh. This dampening spring float is compatible with products by the following brands: Tecumseh, Craftsman, Toro, Cub Cadet, Lawn Boy, and Husqvarna.

This part is a replacement carburetor vent tube. This is a genuine OEM part made by Tecumseh and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a broken or otherwise defective carburetor vent tube on different models of small engine outdoor power equipment. The carburetor vent tube forces fuel to move through the carburetor by acting as a vent or port that generates pressure. This part is essential to equipment functionality and will require replacement if broken or faulty. Special tools may be necessary to install this part properly. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this carburetor vent tube, reference the owner's manual or equipment diagrams for specific instructions and part location.This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This carburetor vent tube can be used with a variety of lawnmower and wood chipper models manufactured by Tecumseh and Toro.

This is a main nozzle tube replacement for use with a range of different types of outdoor equipment and small engines. Another name for the main nozzle tube is the fuel jet. The fuel will turn into a vapor and then travel through the main nozzle in a vacuum process. This draws the air into the Venturi pipe. The main nozzle tube is made from plastic, and it can eventually start to break down and wear away. When this happens, it will no longer be efficient. Owners might find that the engine is not running smoothly, or that it is difficult to start the engine. Replacing this element of the system could be what is needed. This is a genuine OEM main nozzle tube replacement. It is sold individually and works for various models of lawn mower, snowblower, tiller, pressure washer, generator, log splitter, wood chipper, and other small engines. Compatible brands include MTD, Toro, Cub Cadet, Lawn-Boy, Craftsman, and Briggs & Stratton. Owners should always ensure they are getting the correct replacement for their make and model.