Parts for Ge HCK23LCMAFCC: 02 - Fresh Food Door Parts

Fresh food side. Color: white. For the same part in black, purchase WR02X10779.

The Fresh Food Door Gasket is an OEM replacement part for GE refrigerators. It forms an air-tight seal around the fresh food door preventing air and moisture exchange between the refrigerator interior and exterior. The gasket helps to maintain the ideal temperature and humidity levels inside for optimal food storage.

Causes of a bad gasket can include cracks, tears, or worn-away sections compromising the air-tight seal over time. Exposure to heat, moisture, or chemicals during cleaning may also degrade sealing qualities.

Symptoms of a bad gasket include:

• Cool air leaking from around the door
• Interior surfaces becoming wet or frosty
• Difficulty maintaining proper interior temperature settings

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Bin is an OEM part for GE refrigerators. It is a convenient storage compartment located on the interior of the refrigerator door, designed to hold and organize smaller items such as condiments, jars, or beverages.

Symptoms of a faulty door bin:

• Cracks or breaks in the bin itself
• Difficulty in removing or inserting the bin
• Loose or misaligned fit within the door
• Leaks or spills from the bin

Causes of a bad door bin can include physical damage from impact or excessive force, general wear and tear over time, or issues with the mounting brackets or support mechanisms.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models. 

This fixed module shelf supports and secures the refrigerator freezer control module and related electronics to prevent movement and vibration. It restores proper mounting and helps keep wiring and components stable. What it does

• Provides a stable mounting platform for the freezer control module and related circuit components
• Prevents module movement and vibration that can cause noise or intermittent connections
• Helps keep wiring and connectors routed away from moving parts and cold airflow
• Used when the original shelf is cracked, bent, or missing, causing loose electronics

• One fixed module shelf

• Disconnect power to the appliance before starting any work
• Handle electronics and connectors carefully to avoid damage from static or force
• Retain or replace mounting screws and clips as needed; inspect surrounding wiring routing

This replacement insert module restores proper fit and support inside the appliance's FF assembly, helping secure components and reduce looseness. It's a direct-fit replacement designed to stop rattling and restore stable alignment. What it does:

• Secures and positions internal components in the FF assembly to maintain correct spacing and alignment
• Replaces cracked, broken or worn inserts that allow movement or vibration
• Helps eliminate rattling, knocking or loose-feeling parts caused by a failed insert
• Preserves intended part geometry so adjacent components mount correctly

• Disconnect power to the appliance before starting any repair to avoid electrical hazard
• Remove only the panels and fasteners specified in your model's service instructions to access the insert
• Handle plastic clips and tabs carefully to avoid breakage; replace any damaged fasteners
• Test fit and operation before reassembling all panels

The Door Bin is an OEM part for GE refrigerators. This door bin is designed to fit onto the inner door panel of the refrigerator, providing convenient storage for condiments, bottles, and other items that need to be easily accessible. The use of this bin helps to maximize the storage capacity of the refrigerator, keeping items organized and within reach. 

Causes of damage to the door bin often include overloading it with too much weight, which can lead to stress cracks or breakage. 

Symptoms of a bad Door Bin include:

• Cracks or breaks in the bin 
• The bin not fitting properly onto the door panel 
• Difficulty in sliding the bin in and out or removing it for cleaning 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Bin Front is an OEM part for GE refrigerators. This component serves as the front barrier for door bins, helping to keep stored items in place and preventing them from falling out when the door is opened or closed. This front measures approximately 13 inches wide by 3-1/2 inches high.

Common causes of a bad door bin front include cracking due to impact, stress from heavy items, or general wear and tear from frequent use.

Symptoms of a bad door bin front include:

• Items falling out of the door bin
• The bin front appearing loose or detached
• Visible cracks or breaks in the plastic
• Difficulty in securing the bin front to the door bin

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This module snugger is a small retaining piece used in the refrigerator to hold its associated module or component securely in place. Replacing a cracked or missing snugger restores a tight fit, reduces vibration and noise, and supports correct operation.

• Secures the related module or assembly to prevent shifting
• Helps maintain proper alignment for reliable performance
• Reduces rattles and wear from vibration or movement
• Typical signs it's needed: part is broken or missing, components feel loose, or you hear rattling

• Disconnect power to the refrigerator before servicing
• Note the original orientation and location; take a photo for reference
• Reuse existing fasteners or clips if applicable; avoid overtightening
• After installation, confirm the part holds the assembly firmly and that movement is smooth where intended

This is a replacement 10-32 x 1 machine screw used to fasten appliance components. It restores secure mounting of panels, brackets and hardware so parts stay aligned and vibration or rattling is reduced. What it does:

• Secures panels, brackets, housings and small components to the appliance frame
• Keeps control boards, motors or assemblies held firmly in place
• Prevents loose parts that can cause vibration, noise or intermittent connections
• Matches the OEM thread and length for proper fit when replacing a worn or missing screw

• Disconnect power before working inside the appliance
• Use the correct 10-32 driver or bit to avoid stripping the head
• Thread into the original hole and tighten snugly; avoid over-torquing
• Replace with the same size and thread type to ensure proper fit and safety