Parts for Ge RSG22IBPAFWW: 06 - Fresh Food Shelves Parts

Color: white. It measures about 17 inches wide by 1 inch high.

Color: white. Measures about 17 inches wide by 1 inch deep.

The Vegetable Pan is an OEM part for GE refrigerators. This part serves as a dedicated storage solution for fruits and vegetables within the refrigerator, helping to maintain optimal humidity levels and ensuring that produce stays fresh longer.  

Over time, the vegetable pan can experience wear or damage from frequent use, accidental impacts, or overloading. This can lead to cracks, warps, or breaks in the pan, which might affect its ability to properly store produce or fit correctly within the refrigerator.

Symptoms of a bad Vegetable Pan include:

• Difficulty sliding the pan in or out
• Produce not staying as fresh for the intended duration
• Visible cracks or damage to the pan
• Water accumulation beneath the pan due to improper sealing

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This OEM Replacement Part is a clear, meat pan designed for GE refrigerators. The pan measures approximately 20 inches wide, 9 inches high, and 17 inches deep. It is a pan designed to be placed inside the refrigerator compartment for storing and holding raw meats, poultry, or other foods that may produce juices or drippings.

A damaged or worn meat pan can lead to leaks, spills, and potential cross-contamination within the refrigerator. Causes of a bad meat pan may include physical impact, improper cleaning methods, or simply wear and tear over time.

Symptoms of a faulty meat pan include:

• Visible cracks, dents, or warping on the pan surface
• Difficulty sliding the pan in or out of the refrigerator compartment
• Leaks or spills due to improper containment of juices
• Rust or corrosion on the pan material

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

The Pan Cover Front Gasket is an OEM part for GE refrigerators. This gasket provides a seal for the front edge of the refrigerator's crisper or pantry drawer pan cover, preventing cold air from escaping and ensuring that the contents remain at the optimal temperature for freshness.

Common causes of a bad gasket include regular wear and tear, exposure to food spills, or accidental damage from frequent opening and closing of the drawer.  

Symptoms of a bad pan cover front gasket include:

• The drawer not sealing properly, leading to temperature fluctuations
• Visible cracks, tears, or warping of the gasket
• Increased condensation or frost buildup in the drawer area
• Food items spoiling faster than usual

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Lower gasket shield protects and supports the bottom edge of the refrigerator/freezer door gasket for a tighter seal, reducing air leaks and moisture build-up while keeping the gasket aligned for reliable sealing. What it does:

• Protects and secures the lower edge of the door gasket to maintain proper gasket positioning and contact.
• Helps prevent cold air loss, frost buildup, and condensation caused by a misaligned or damaged lower gasket area.
• Provides a mounting surface that keeps the gasket from folding or pulling away at the bottom of the door.
• Replaces worn, cracked, or broken lower shield pieces that can cause visible gaps or sealing issues.

• Disconnect power to the appliance before beginning any repairs and follow manufacturer service instructions.
• Remove the door gasket or lower trim per OEM steps to access the shield; keep fasteners and note orientation for reassembly.
• Do not force plastic parts; if removal is tight, work slowly to avoid cracking the cabinet or new shield.

The Slide Bearing is an OEM part for GE refrigerators. This small but crucial component is typically located on the rails of refrigerator drawers, allowing them to slide in and out smoothly without sticking or jamming. The slide bearing helps reduce friction between the drawer and the frame, protecting the refrigerator's structure from wear and tear while ensuring a quieter, more efficient operation. 

Symptoms of a failing slide bearing include:

• Drawers becoming difficult to open or close
• Squeaking noises during drawer movement
• Increased resistance or jerking when pulling out the refrigerator drawers

Causes of slide bearing deterioration typically involve accumulation of food particles or debris, general wear from frequent use, or inadequate lubrication leading to increased friction and eventual wear out.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This slide rail is an OEM replacement part for GE refrigerators. The slide rail measures 1.25 inches in height, 2 inches in width, and 16 inches in depth.  This durable and reliable slide rail ensures smooth and effortless drawer operation. 

Causes of failure involve repeated impact stresses absorbing the weight of the heavy door opening and closing potentially thousands of daily times over 10-20 years. 

Symptoms of a faulty slide assembly include:

• Difficulty fully opening or closing the oven door  
• Binding, jamming or misalignment of door movement
• Visible bending or warping of metal slide track components
• Loose fasteners connecting assembly to cabinetry 

This OEM replacement part is also compatible with Hotpoint and RCA electric ranges as well.

NOTE: For the right-hand side order WR72X240. For the slide bearing order WR1X2048.

The Slide Assembly RH is an OEM replacement part for GE side-by-side refrigerators. As a replaceable sub-assembly, it restores smooth extension of plastic vegetable/multi-purpose slides on the right interior. The slide measures approximately 16 inches.

Symptoms of a bad slide assembly include: 

• Drawers failing to fully extend or retract inward  
• Difficulty using bins and storage sections 
• Noisy operation of problematic slides
• Stress concentration leading to cracks along slides

Causes stem from extended use gradually degrading nylon rollers and wear strips through inevitable friction. Exposure to excessive weights above slide limits may also bend or warp steel support rails quicker.

This genuine GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.

The Left Hand Slide Assembly is an OEM component for GE bottom-mount refrigerators. It sits on the left side and smoothly guides the refrigerator shelf inserts in and out. This slide measures Approx 10 inches x 1 3/8 inch x 1 5/16 inch.

Symptoms of a faulty slide assembly include:

• Shelves difficult to fully extend or retract
• Grinding or rubbing noises from the shelf area 
• Visible signs of wear to plastic rollers and tracks

Causes relate to typical wear and tear over time under regular use. Improper loading of shelves can also potentially damage slide machinery.

For the right hand side order WR72X242. For the slide bearing order WR1X2048.

This GE replacement restores smooth shelf functionality, compatible with Hotpoint, RCA, and select Kenmore models as well.

The Slide Assembly RH is an OEM part for GE refrigerators. This slide assembly is designed to support and guide the refrigerator's drawers, ensuring smooth opening and closing. The slide measures approximately 10 inches x 1 3/8 inch x 1 5/16 inch. This is the right-hand side. For the left-hand side order WR72X241. For the slide bearing order WR1X2048.

Over time, the slide assembly can become worn out or damaged. Causes of a bad slide assembly can include frequent use, physical damage from overloading the drawers, or wear and tear on the sliding mechanism.

Symptoms of a bad Slide Assembly RH include:

• Difficulty opening or closing the refrigerator drawers
• Drawers not sliding smoothly or getting stuck
• Unusual noises when moving the drawers

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a 10-24 x 1.0 inch screw used to secure appliance panels and components. It replaces worn or missing fasteners to restore proper fit and reduce rattling or loose parts for safer, quieter operation. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable
• Stops vibrating or rattling caused by loose or missing screws
• Restores proper grounding/attachment where a threaded fastener is required
• Matches OEM thread size and length for a correct fit when replacing damaged screws

• Use the correct driver bit and turn carefully to avoid stripping the head or threads
• Do not overtighten; snug until secure to prevent damage to mating parts
• Replace like-for-like with the same thread size and length for proper fit
• Disconnect power and follow appliance safety guidelines before accessing internal components