Parts for Maytag LDE7500ADL: 15 - Tumbler (Lde7500acl,Acw,Adl,Adw) Parts

The Lint Filter is an OEM part for Whirlpool dryers. It is designed to capture lint and debris that are produced during the drying cycle, preventing them from entering the dryer’s internal components and reducing the risk of fire hazards. This filter measures approximately 13 inches wide by 9 inches high. 

Over time, the lint filter can become clogged with lint, get damaged, or develop holes that reduce its effectiveness. Regular cleaning is necessary to maintain its performance, but eventually, it may need replacement to ensure optimal dryer operation.

Symptoms of a bad lint filter include:

• Reduced drying efficiency
• Longer drying times
• Excessive lint on clothing
• Visible damage or holes in the filter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement mounting screw for washer panels, brackets, and components. Needed when original fastener is missing, stripped, or rusted to restore secure fit.

Prevents lint buildup and moisture escape between drum and front panel. Replace when cracked, flaking, or separated. Confirm fit with your model number.

This small hardware washer serves as a spacer/bearing surface within appliance assemblies to distribute load and maintain proper clearance. Replacing a worn washer helps restore smooth operation and alignment of the affected control or mechanism. What it does:

• Distributes fastener load and protects mating surfaces
• Maintains correct spacing to prevent rubbing or binding
• Provides a smooth bearing surface to reduce friction and noise
• Common symptoms when worn or missing: looseness, scraping sounds, difficult or rough turning, misalignment

• 1 washer

• Disconnect power; shut off gas or water if applicable
• Note the stack order and orientation before removal
• Inspect the mating fastener/shaft for wear and replace related parts if damaged
• Reassemble and tighten fasteners snugly—do not overtighten—then test for smooth operation

Replacement screw for securing dryer panels, brackets, and baffles. Ideal for replacing missing, stripped, or rusted hardware to restore a secure fit.

Replacement mounting screw for securing components and housings in place. Order a new screw if yours is stripped, missing, or damaged during repairs.

Secures drum rollers, brackets, and panels in your dryer. Replace if stripped, corroded, or missing to restore safe, rattle-free operation. Confirm fit.

Fiber washer seals drum roller shaft connections in dryers. Replace when worn to prevent leaks and noise. Confirm fit with your model number.

The Dryer Drum Roller Axle is an OEM part for Whirlpool dryers. It plays a role in the dryer's operation by offering support and an axis for the drum roller to spin smoothly. This guarantees effective and balanced tumbling of clothes throughout the drying cycle. 

Causes of a bad Dryer Drum Roller Axle can include prolonged use leading to wear and tear, accumulation of lint and debris causing additional friction, or improper loading of the dryer drum which can bend or strain the axle.

Symptoms of a bad Dryer Drum Roller Axle include:

• Unusual noises, such as squeaking or grinding, during the operation
• The dryer drum struggling to turn or not turning at all
• Increased vibration or shaking of the dryer unit
• Clothes taking longer to dry or not drying evenly

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Replacement drum support roller for dryers. Installs on the drum assembly to allow smooth rotation. Replace when cracked, worn, or making noise.

Fiber washer seals drum roller shaft connections in dryers. Replace when worn to prevent leaks and noise. Confirm fit with your model number.

Retaining clip secures mixer components in place. Replace if cracked, rusted, or missing to restore proper assembly and stability of internal parts.

This dryer drum belt connects the motor to the drum for proper rotation. Replace when the drum won't spin or makes squealing sounds. Verify fit by model number.

Lifter fin that mounts inside the rotating drum to tumble laundry. Replace if cracked, broken, or missing. Installs with screws for proper load movement.

Hex washer head screw for dishwashers. Secures door panels, control boards, latches, and internal components. Replace if missing, stripped, or damaged.

Pop rivet secures sheet-metal panels, brackets, and burner jar lids on appliances. Replace missing, drilled-out, or damaged rivets for permanent hold.

Supports drum rotation and reduces friction. Replace when dryer squeals, rumbles, or drum sticks. Includes mounting hardware. Verify fit by model number.

Specs: 10 - 16 x .375