Parts for Ge GDT580SSF2SS: Body Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Replacement door spring for dishwashers. Balances door weight for smooth opening and closing. Replace if spring is broken, stretched, or missing.

Adjustable leveling leg for dishwashers. Screws into the base frame to set height and stabilize the unit. Replace if worn, broken, or missing.

Dishes not drying or staying wet after cycle? This heating element heats water during wash and dries dishes after rinse. DIY-friendly replacement part.

Factory replacement drip tray that installs under your dishwasher to catch and channel water from condensation or minor leaks, protecting floors and cabinets.

Secures the dishwasher heating element to the tub from underneath. Replace if cracked, stripped, or missing to prevent leaks at the element mounting point.

Replaces cracked, leaking, or worn drain hoses in your dishwasher. Creates the required elevated loop to prevent backflow. Essential for proper drainage.

Replacement upper spray arm assembly for dishwashers. Snaps into place on the top rack. Replace when cracked, broken, or if the arm has fallen off or detached.

Seals the upper spray arm hub to route water properly through the arm. Replace when worn to restore upper-rack spray performance and stop leaks or bypass.

Fill funnel directs water into the tub and allows air to escape during drying. Replace if leaking at inlet or water doesn't fill properly. Verify fit.

Fill funnel directs water into the tub and allows air to escape during drying. Replace if leaking at inlet or water doesn't fill properly. Verify fit.

If your dishwasher isn't filling properly or you see water pooling underneath, the fill hose may be brittle or leaking. DIY replacement in 30 minutes.

Fill funnel directs water into the tub and allows air to escape during drying. Replace if leaking at inlet or water doesn't fill properly. Verify fit.

The Conduit Main Assembly is an OEM replacement part for GE dishwashers. It is installed within the dishwasher tub below the upper wash arm, and is responsible for securely mounting and holding the upper wash arm in place during operation.  

Causes of a bad upper wash arm support include:

• Symptoms of a bad upper wash arm support include: 
• Vibration or noise from an unsecured wash arm
• Improper alignment of spray pattern
• Restricted rotation of the wash arm during washing  
• Leaks at the tub connection point

Symptoms can include cracks or breaks that compromise its structure, or wear over extended use without replacement.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Docking port for dishwasher mid blaster assembly. Mounts to rear wall with two clips. Replace if cracked, broken, or seals no longer hold properly.

Seals the water feed conduit connection to maintain spray arm pressure and prevent leaks. Replace if you notice low water flow or white residue on dishes.

Protective shield that covers electrical conduit connections on your dishwasher. Replaces cracked, broken, or missing shields to protect wiring.

Hex washer head screw for securing dishwasher brackets, panels, and internal assemblies. Replace if stripped, corroded, or missing during repairs.

Connects dishwasher door to spring mechanism to prevent door from dropping when opened. Replace if cable is broken, frayed, or detached from pulley.

Door hinge pulley for dishwashers. Works with springs and cables to balance door movement. Replace if cracked, broken, or causing uneven door operation.

Zinc-plated 10-32 x 1/4 inch screw secures internal panels and brackets in dishwashers. Replace missing, stripped, or corroded fasteners to restore fit.

Friction washer creates resistance to prevent dishwasher components from loosening during operation. Replace if parts become loose or rattle. Verify fit.

Replace missing or stripped mounting screws in your washer dryer combo. This 12-pack secures panels, components, and internal parts during assembly or repair.

Cushions and positions the tub to reduce vibration and prevent metal contact. Replace if worn or if tub alignment shifts during wash cycles.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Encloses the power-connection compartment at the base of your dishwasher. Replace if cracked, broken, or missing to protect wiring from debris.

Dishwasher not filling with water or filling too slowly? The water inlet valve controls water flow into the tub. DIY-friendly repair with video guide.

10-32 x 9/16" machine screw secures dishwasher panels, brackets, and internal assemblies. Replace missing, stripped, or damaged fasteners to restore fit.

Dishwasher won't start or lights are completely unlit? Main control board failure stops all functions. Moderate DIY repair restores power and cycles.

Spray arms not spinning or dishes staying dirty? This dishwasher wash pump circulates water during the wash cycle. Moderate DIY repair with wiring.

Fix dishwasher electrical failures with this DC wiring harness assembly. Restores power and signal connections to components for reliable operation.

Protective lower housing for dishwasher control electronics. Replaces cracked, broken, or missing base covers. Shields wiring and components from debris.

Replaces the protective top cover for your dishwasher control box housing. Needed when the original is cracked, broken, or missing to keep electronics enclosed.

Insulation bag assembly that wraps around the dishwasher tub to reduce noise and retain heat. Replace if torn, deteriorated, or missing material.

Foam insulation wrap that lines the dishwasher tub to retain heat and dampen noise. Replace if worn, torn, or missing to restore efficiency.

Leaking dishwasher? A damaged hose clamp may be allowing water to escape at pump or drain connections. This clamp secures hoses to prevent leaks.

Secures hoses and tubing in your dishwasher to prevent leaks and ensure proper water flow. Replace if you notice water dripping or leaking around connections. Verify fit with your model number before ordering.

Stainless steel mounting screw for dishwasher components. Replaces rusted, corroded, or missing screws on handles, racks, and internal parts.

Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This latch assembly secures the door and activates switches. 5-10 min fix.

Seals the dishwasher tub opening to prevent water leaks during wash cycles. Replace if worn, flattened, or causing leaks. Verify fit with your model.

Replaces worn, cracked, or missing side trims along the dishwasher tub opening. Restores a clean finish and allows the door to open smoothly.

Replaces worn, cracked, or missing side trims along the dishwasher tub opening. Restores a clean finish and allows the door to open smoothly.

Secures your dishwasher underneath the kitchen countertop. Replace if the bracket is cracked, broken, bent, or missing from installation.

Secure your dishwasher to the underside of countertops with this screw and button plug kit. Replace stripped, missing, or damaged fasteners.

Fix loose or rattling control board with this dishwasher clip. Secures electronic board to prevent vibration and wire strain. Simple snap-in install.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.