Parts for Frigidaire FGHB2844LM1: 07 - Cabinet Parts

Filters contaminants from refrigerator water and ice. Replace every 6 months or when flow slows for clean, fresh-tasting water. Verify fit by model.

Fan cover for bottom-mount refrigerators. Protects the fan assembly from debris. Replace if cracked, broken, or missing to maintain proper airflow.

Replacement air duct for your bottom-mount refrigerator. Directs airflow between compartments. Order a new duct if yours is cracked or damaged.

Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.

Replaces worn or damaged shaft support bushing in your refrigerator. Cushions rotating shafts to reduce friction and noise. Order a new bushing today.

Seals the coil cover area to maintain proper airflow and prevent dust buildup. Replace if worn, cracked, or losing seal efficiency. Verify fit with your model.

Plastic cover that shields the evaporator coil and directs airflow in the freezer compartment. Replace if cracked, broken, or missing to prevent debris.

Covers the factory test opening on your refrigerator cabinet or liner. Replace if missing, cracked, or damaged to restore a finished look and seal.

Fix SY EF error codes or warm refrigerator temperatures with this evaporator fan motor. Moderate DIY repair restores air circulation and cooling.

Interior light won't turn on or off? This refrigerator light switch controls the lamp circuit. Easy DIY fix restores reliable lighting control.

LED light bulb illuminates your refrigerator interior. Replace when bulb burns out, flickers, or stops working. Verify fit with your model number.

Wiring harness for refrigerators. Connects electrical components inside the appliance. Replace if wires are frayed, damaged, or connections are loose.

Wiring harness for bottom-mount refrigerators. Connects electrical components inside the unit. Replace if wires are frayed, damaged, or corroded.

Refrigerator cover cap that installs on the exterior cabinet or internal components. Replace if cracked, broken, discolored, or missing to restore appearance.

Fix a refrigerator light that won't turn on, flickers, or has a loose bulb. This interior light socket secures the lamp and restores reliable lighting.

Fix intermittent refrigerator operation caused by worn or heat-damaged component sockets. This receptacle restores secure plug-in connections for reliable performance.

Replace your refrigerator door gasket seal to restore proper sealing and energy efficiency. Worn gaskets cause temperature loss and higher bills.

Support plate for refrigerator light socket assembly. Mounts inside the fresh food compartment. Replace if cracked, broken, or missing to secure socket.

Cover cap for bottom-mount refrigerators. Replaces cracked, broken, or missing covers. Installs on exterior or interior panels to restore appearance.

Replacement screw fastener for securing panels, trim, and components inside your refrigerator. Needed when original screws are stripped or missing.

Secures panels, brackets, and internal components in your refrigerator. Replace when the original fastener is missing, stripped, or corroded for proper fit.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Adjustable front roller assembly for refrigerators. Supports appliance weight and allows leveling adjustments. Replace if roller is damaged or bolt is broken.

Secures internal components to the refrigerator frame. Replace this mounting bracket if the original is bent, broken, or missing to restore alignment.

Washer for bottom-mount refrigerators. Replaces lost, damaged, or worn washers used to secure components. Essential for proper assembly and fit.

Lower door hinge for bottom-mount refrigerators. Secures the door to the cabinet frame. Replace if cracked, stripped, or causing door misalignment.

Lower door hinge provides the pivot point for your refrigerator door. Replaces worn, damaged, or broken hinges that cause door sagging or misalignment.

Plastic spacer that mounts between refrigerator door components to maintain proper alignment and spacing. Replace if cracked, broken, or missing.

Door spacer for bottom-mount refrigerators. Maintains proper spacing between door panels and cabinet. Replace if cracked, missing, or worn to prevent rubbing.

Replacement corner trim that covers the cabinet edge of your refrigerator. Restores a finished look to cracked, chipped, or missing corner pieces.

OEM mounting bracket that secures the hinge and pin assembly inside your refrigerator. Replace if cracked, broken, or missing to restore proper alignment.

Supports and aligns the refrigerator door at the hinge pivot point. Replace if cracked, bent, or worn to restore stable door operation and proper sealing.

Replace a cracked or missing upper hinge cover on your refrigerator door. This trim piece conceals hinge hardware for a clean, finished look.

Replacement trim cover cap for your refrigerator. Conceals exposed openings and components for a neat appearance. Order when original is cracked or missing.

Molded plastic trim piece that conceals the upper door hinge assembly. Replace if cracked, broken, or missing to restore a finished look.

Hex head screw secures refrigerator door hinges to the cabinet. Replace if missing, stripped, or lost during moves or repairs. 1/4-20 thread size.

Adjustable front roller assembly for refrigerators. Supports appliance weight and allows leveling adjustments. Replace if roller is damaged or bolt is broken.

Replacement screw for refrigerator panels, brackets, and covers. Secures interior and exterior components. Needed when original is missing, stripped, or corroded.

This control board has been manufactured by Frigidaire for use with compatible refrigerators. This part is responsible for managing the different functions of the refrigerator, including the defrost times and cooling cycles. A faulty control board can lead to the appliance failing to maintain cold enough temperatures, in which case, the control board should be immediately replaced. Ensure that the appliance is powered off and disconnected from the power source and that perishable foods are safely stored for the duration of the repair process.This is a genuine OEM part and has been sourced directly from the manufacturer. This control board is compatible with different models of refrigerators that have been manufactured by Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and some other compatible brands.

Refrigerator door guide channel that helps align and support the door mechanism. Replace if cracked, broken, or worn to restore proper door alignment.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.

Replacement screw for securing panels, components, and assemblies in appliances. Needed when original screws are stripped, lost, or damaged during repair.

Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.

Black front grille kickplate panel for refrigerators. Installs at the bottom base of your unit. Replace if cracked, broken, faded, or missing to restore appearance.

Small bearing insert that supports the refrigerator door stop mechanism. Replace when worn, cracked, or causing loose door alignment and excess play.

Timer not staying secured? This mounting screw fastens the defrost timer to its bracket. Simple fix in under 10 minutes with basic tools.

Hex washer head screw for washers and laundry centers. Replaces missing, stripped, or damaged screws during repairs or component replacement.

Insulated cardboard cover assembly that installs on the rear bottom of your refrigerator. Replaces a cracked, torn, or missing original cover.

Fixes incorrect temperature readings and short cycling. This thermistor monitors fridge temps and signals the control board. Moderate DIY repair.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.

Molded plastic evaporator cover that protects the freezer coil assembly and directs airflow. Replace if cracked, broken, or missing for proper cooling.

Clear light shield lens protects interior refrigerator bulb from moisture and impact while diffusing light. Replace if cracked or tabs broken. Confirm fit.

Replacement light lens cover for your refrigerator. Replace when cracked, yellowed, or damaged to restore proper lighting. Verify fit with your model number.

Plastic cover that protects and conceals electrical wiring connections in your refrigerator. Replace if cracked, broken, or missing to restore appearance.

Fix a fridge that's freezing food or not cooling properly. This air damper controls cold airflow between compartments. Moderate DIY repair for most models.

Seals the air damper opening to maintain proper airflow between compartments. Replace if torn or compressed to fix uneven cooling and drafts.

Refrigerator not cooling or ice maker stopped working? This main control board fixes temperature regulation and ice production issues. Moderate DIY repair.

Seals refrigerator door to maintain temperature and reduce energy loss. Replace if worn, torn, or compressed to restore cooling efficiency. Verify fit.

Seals refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing temperature issues. Verify fit with model number.

Secures the evaporator fan motor to its bracket for proper airflow. Replace if broken or missing to eliminate vibration, noise, or cooling issues.

Replacement sump cover for bottom-mount refrigerators. Installs under drawers to protect components. Needed when original is cracked, broken, or missing.

Mounting screw for washer and pedestal installation. Replaces lost, stripped, or corroded screws. Secures components and panels during assembly.

Foam insulation installs in refrigerator cabinet walls and interior surfaces. Replace if cracked, compressed, torn, or missing to restore efficiency.

Wiring harness for bottom-mount refrigerators. Connects electrical components throughout the unit. Replace if wires are frayed, damaged, or corroded.

Fixes incorrect temperature readings and excessive frost buildup in refrigerators. This sensor monitors air temperature to control compressor cycles.

White button plug insert for refrigerator door handles and panels. Replaces cracked, broken, or missing plugs. Restores clean finished appearance.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.