Parts for Kitchenaid KRMF706EBS04: Cabinet Parts

The Power Control Board is an OEM component for Whirlpool refrigerators. It is an essential electronic component responsible for monitoring and regulating power distribution throughout the entire unit. The power control board controls components such as cooling fans, compressors, lights, ice makers, and more.

Symptoms of a bad power control board include: 

• Lights, fans, or other components failing to turn on
• Inability to adjust temperature settings  
• Constant tripping of circuit breakers
• Error codes displayed that cannot be cleared

Causes of failure include moisture damage, component breakdown over time, or power surges that can fry circuitry.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Refrigerator Control Board is an OEM part for Whirlpool refrigerators. It acts as the brain of the refrigerator, managing and coordinating various functions such as temperature regulation, defrost cycles, and the operation of fans and compressors.

You should replace the control board if it malfunctions or fails. Causes of a bad control board can include power surges, electrical shorts, or component wear and tear over time. Exposure to moisture or extreme temperatures can also cause damage to the board.

Symptoms of a bad control board include:

• Inconsistent or incorrect temperatures
• The refrigerator or freezer not cooling
• Unresponsive control panel or display
• Unusual noises from the refrigerator
• Error codes displayed on the control panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This upper left door hinge supports and guides the appliance door for smooth opening and secure alignment. Replacing a worn or damaged hinge restores proper door fit and helps prevent sagging or uneven seals. What it does:

• Provides the pivot point that lets the door open and close smoothly
• Keeps the door aligned to maintain an even seal and proper closing
• Prevents door sagging, rubbing, or misalignment that can cause gaps
• Works with the hinge pin and mounting points to support door weight

• Disconnect power to the appliance and remove food from the door area before starting
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use the same mounting hardware unless replacements are specified; tighten fasteners securely but do not overtighten
• Inspect strike plates, lower hinge, and gasket for related wear

Color: Grey  (LH)

Color: Black  (LH)
 

Color: Grey  (RH)

Color: Black  (RH)
 

This replacement screw fastens appliance components to restore secure connections and reduce vibration or rattling. Use it when panels, brackets, or assemblies are loose or moving. What it does:

• Secures panels, brackets, and small appliance parts to prevent movement
• Restores proper alignment for doors and trim that shift from loose hardware
• Helps eliminate vibration noise caused by loose fasteners
• Works with assemblies that use standard machine/sheet-metal screws

• Disconnect power or gas supply before servicing the appliance
• Use the correct driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or damage parts
• Inspect surrounding components and replace any damaged clips or hardware as needed

Color: Black

Color: Grey

The Hinge Door is an OEM part for Whirlpool refrigerators. It attaches the refrigerator door securely while allowing smooth opening and closing. Reinforced metal hinges withstand heavy doors with precision balance.

Over the years, excess force from heavy loads or clumsy handling can misalign hinges. Causes of a bad hinge include stripped screws, bent barrels, or worn bushings letting doors droop or stick.

Symptoms of a bad hinge include:

• Door doesn't close or seal properly
• Difficulty opening/closing the refrigerator door 
• Door is crooked or sits unevenly
• Noise or grinding felt/heard from hinges

This Whirlpool OEM hinge ensures proper door function. Its durable construction maintains dependability and refrigerator efficiency. Compatible also with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, select Kenmore models.

Color: Grey
 

Color: Black
 

This hex-head sheet metal screw secures refrigerator panels, brackets, and other internal components. Replacing a missing, corroded, or stripped screw helps keep parts tight, reduces vibration noise, and maintains proper alignment of covers and assemblies.

• Fastens sheet-metal panels, ducts, brackets, and trim inside the cabinet
• Helps maintain a secure fit and reduce rattles or buzzing
• Restores alignment when an original fastener is missing or damaged
• Common signs include loose or vibrating panels, a stripped screw head, or a screw that won't tighten

• Unplug the refrigerator and shut off water supply if working near ice/water components
• Use the correct nut driver or socket for the hex head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace screws one at a time to help keep parts aligned

The Hinge Bushing is an OEM component specifically designed for Whirlpool refrigerator doors. It is a circular bearing and support component that promotes smooth door swinging. The bushing fits within hinges to reduce friction and prevent premature wear.  

Causes of compromised hinge bushings can be years of door opening compressing the bushing material. Exposure to moisture also contributes to cracked, pitted or damaged bushings failing to guide doors effortlessly.

Symptoms of failing hinge bushings include:

• Stiff or resistant door movement requiring extra effort  
• Noisy hinges or grinding sounds due to metal-on-metal contact
• Misaligned or sagging doors unable to fully latch or seal
• Premature wear of connecting hinge parts forcing early replacement

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

Color: Black
 

Color: Grey
 

Replacement screw that secures panels, brackets, and other components inside your appliance, keeping assemblies tight and aligned. Replace missing or stripped hardware to eliminate looseness, reduce vibration, and restore a solid, factory-fit hold.

• Fastens panels, brackets, trim, or internal components
• Helps maintain alignment and reduce rattling/vibration
• Replaces missing, loose, rusted, or stripped hardware
• Common signs: stripped head/threads, loose panel, buzzing/rattling noises

• Disconnect power before service; shut off gas/water if applicable
• Match to the original screw; start threading by hand to avoid cross-threading
• Use the correct driver size to prevent stripping
• Tighten snugly; do not overtighten. If it won't hold, inspect the receiving hole/clip

The LED Power Board is an OEM replacement part for Whirlpool refrigerators. It functions as the central hub that powers the LED lights within the appliance, ensuring the interior is well-lit for easy visibility. The board is designed to efficiently distribute power to the LEDs, contributing to the refrigerator’s energy efficiency and the longevity of the lights.

Symptoms of a bad LED Power Board include:

• Flickering or dim interior lights
• Lights not turning on when the refrigerator door is opened
• Unusual buzzing or electrical sounds
• Error codes or signals related to the lighting system

Causes for a malfunctioning LED Power Board can include electrical surges, component wear over time, or issues with the connections or wiring.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Refrigerator Door Switch is an OEM replacement part for Whirlpool refrigerators. It is a crucial component that monitors the opening and closing of the refrigerator door, ensuring proper operation and energy efficiency.

Causes of a bad Door Switch can include physical damage, wear and tear over time, or electrical malfunctions.

Symptoms of a faulty Refrigerator Door Switch include:

• Interior lights remaining on even when the door is closed
• Compressor failing to cycle on and off as intended
• Condensation or frost buildup due to improper sealing
• Error codes or warning lights related to the door switch

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

This rubber grommet cushions and protects a mounting or wiring pass-through, helping reduce vibration and prevent chafing where parts or wires pass through a panel. It's a simple replacement that restores a secure, quiet fit. What it does:

• Provides a protective barrier around openings to prevent wire and component abrasion
• Cushions panels or components to reduce noise and vibration
• Helps maintain proper alignment of mounted parts
• Commonly replaced when torn, flattened, or allowing rubbing/metal-to-metal contact

• One rubber grommet as shown

• High-level replacement — access to the panel or opening is required
• Inspect surrounding fasteners and wiring for damage while replacing
• Use basic hand tools; avoid stretching the grommet excessively during installation
• Disconnect power to the appliance before working in areas with wiring or motors