Parts for Kitchenaid KP26M1XQ2ER5: Color Variation Parts

This upper machined housing supports and aligns the appliance's drive/transmission assembly for smooth operation and reduced vibration. It replaces a worn or damaged support that can cause noise or imbalance. What it does:

• Provides a machined mounting surface for the transmission/drive assembly
• Keeps drivetrain components aligned to reduce wobble and noisy operation
• Helps maintain proper interaction between the transmission and tub/drum
• Commonly replaced when wear or damage causes vibration, grinding, or unstable spinning

• One upper machined housing

• Disconnect power and water before starting any repair
• Access may require removing outer panels or the cabinet
• Inspect related bearings, seals, and fasteners and replace if worn
• If you're not comfortable with drivetrain work, consider service

Upper housing assembly for stand mixers. This machined structural component covers and protects the motor head. Replace if cracked, damaged, or worn.

This housing is the replacement cabinet housing that secures and protects internal components, restoring proper alignment and appearance. It helps maintain safe operation by covering wiring and support points. What it does:

• Protects internal components and wiring from debris and damage
• Restores proper fit and alignment of adjacent panels and controls
• Reduces noise and vibration caused by loose or damaged cabinet parts
• Common symptom: visible cracks, gaps, or wobbling of the appliance exterior
• Common symptom: rattling or rubbing noises coming from the cabinet area

• Disconnect power (and water, if applicable) before starting any repair
• Handle panels carefully — edges may be sharp; wear gloves and eye protection
• Require basic hand tools (screwdrivers, nut drivers) to remove panels and fasteners
• Follow manufacturer instructions for reassembly and torque of fasteners

This housing assembly replaces the damaged or worn outer casing that protects internal components and keeps the appliance structure secure. Restores proper fit and prevents debris from contacting internal parts. What it does:

• Replaces cracked, broken, or misshapen housing sections that cause gaps or misalignment
• Helps stop rattling or vibration caused by loose or compromised panels
• Protects internal wiring, motors and other components from dirt and accidental contact
• Restores correct mounting points for adjacent panels and hardware

• Disconnect power (and water if applicable) before servicing to avoid shock or injury
• Follow OEM service manual for panel removal and reassembly; some screws/clips may be hidden
• Use proper tools and keep track of fasteners and seals to ensure a secure fit
• Inspect and replace damaged mounting points or adjacent parts as needed for a lasting repair

Replacement outer housing for stand mixers. Restores exterior protection and finished appearance when original is cracked, broken, or damaged.

Empire Red porcelain enamel finish for mixer bowls. Restores faded, chipped, or worn coating. Brings back glossy factory appearance and color.

Onyx black finish panel restores your mixer's exterior appearance. Replaces worn, scratched, or mismatched decorative panels with a factory-style surface.

Replacement trim band that finishes the door or frame edge of your stand mixer. Replace when worn, cracked, or missing to restore appearance and protect edges. Verify fit with your model number.

Fix grinding noises or mixer speed issues with this stand mixer gearcase assembly. Essential component housing internal transmission gears.

This gearcase is the drive transmission that transfers motor power to the washer agitator and basket, restoring normal agitation and spin performance. It replaces a worn or damaged transmission assembly to help the washer move and clean properly. What it does:

• Transfers motor torque to the agitator and tub so the washer can agitate and spin
• Restores normal agitation or spinning when the transmission is worn or stripped
• Stops slipping, grinding, or inconsistent motion caused by damaged gears
• Works with the motor coupling and drive components to maintain correct drive alignment

• One gearcase (transmission) assembly

• Disconnect power and turn off water supply before starting any repair
• Access may require removing the cabinet, drive belt, and motor—follow OEM service instructions
• Inspect adjacent parts (motor coupling, seals, fasteners) and replace any worn components

Mixer won't turn or makes grinding noise? This gearcase assembly transfers motor power to the beater attachment. Restore mixing action and eliminate noise.

Fix grinding noise or slipping during mixing with a new lower gearcase. Transfers motor power to the rotating assembly. Moderate DIY repair.

Fixes mixer that won't turn or makes grinding noises. This gearcase assembly transfers motor power to beaters. Moderate DIY repair, 1-2 hours.

Fix mixer attachment spinning issues with a planetary gear assembly replacement. Common fix for stripped gears or attachments not rotating properly.

Fix poor mixing or uneven beater rotation with this stand mixer planetary gear assembly. Connects beaters to motor for proper orbital motion.

If your stand mixer bowl isn't rotating or attachments won't spin, the planetary gear assembly may be worn. Moderately difficult repair requiring disassembly.

Fix grinding noises or mixer bowl not spinning with this planetary gear assembly. Restores smooth rotation and proper mixing action in stand mixers.

Fix a stand mixer that won't rotate the beater or mixes unevenly. This planetary assembly transfers power from the gearcase to spin attachments smoothly.

Fix a mixer planetary that fell off or slipped down. This assembly holds the beater and rotates it around the bowl for thorough mixing. DIY repair.

If your mixer attachment falls off or makes clunking noises, the planetary assembly likely needs replacement. This is a 15-minute repair with basic tools.

Onyx black decorative panel cover for stand mixers. Replaces cracked, chipped, or discolored exterior panels. Restores appearance and finish.

Replacement support bracket for stand mixers. Installs to stabilize and secure the motor or mixing mechanism. Needed when original is cracked or broken.

Empire red touch-up paint for mixers. Restores original finish to cover chips, scratches, and blemishes on exterior surfaces. Maintains appearance.

Onyx black trim band cover for stand mixers. Replaces cracked, chipped, or discolored decorative trim pieces. Restores the finished look of your mixer.

Replace your mixer's cracked or discolored body cover panel. This cosmetic part refreshes your stand mixer's exterior appearance when worn or damaged.

Onyx black housing cover for stand mixers. Replaces cracked, chipped, or discolored exterior casing. Restores clean appearance to mixer body.

Empire red decorative housing shell for stand mixers. Replaces cracked, chipped, or discolored exterior casing. Restores appearance and protects motor.

Stand mixer base housing that supports the motor and mixing head. Replace if cracked, damaged, or missing. Installs as the main body structure.