Parts for Lg LRG3193ST/00: Cooktop Parts

Replacement screw secures panels and components in your microwave. Install when original hardware is stripped, rusted, or missing to stop rattles.

Wire harness for gas ranges. Connects electrical components inside your range. Replace if wires are damaged, melted, frayed, or connections are loose.

Factory mounting screw secures brackets, covers, and internal assemblies in your range. Replaces missing, stripped, or damaged fasteners for proper fit.

Replacement washer that secures fasteners and distributes load at connection points in ranges and ovens. Needed when original is missing, worn, or damaged.

Replacement screw for electric and gas ranges. Secures internal components and panels. Needed when original is stripped, missing, or damaged during repair.

Secures panels, brackets, and internal components in your range. Replace this screw if the original is missing, stripped, or rusted for proper fit.

Customized screw secures panels, brackets, and small assemblies in ranges and ovens. Replace when original specialized fastener is missing or damaged.

Mounting screw for range bake element assembly. Secures heating element to oven cavity. Replace if screw is stripped, missing, or corroded during repair.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Secures the fan blade to the motor shaft in ranges and ovens. Replace if loosened from vibration, stripped threads, or missing to restore proper mounting.

Replacement mounting screw for range panels and components. Needed when original screw is stripped, lost, or damaged. Secures panels for stable operation.

Fix a range that won't heat, cycle on, or respond to buttons. This control board assembly interprets inputs and restores reliable oven operation.

Secures panels, brackets, and trim on your gas range. Replace this self-tapping fastener if it's missing, stripped, or damaged to restore alignment.

Factory-style screw for securing panels, brackets, and assemblies on gas ranges and cooktops. Replace if missing, stripped, or damaged during repairs.

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Replaces a cracked, broken, or loose range door handle. Restores secure grip and smooth operation. Direct fit for OEM mounting points on your oven door.

Decorative trim panel for gas range doors. Replaces cracked, scratched, or faded door trim. Installs on the front exterior of the range door housing.

Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.

Inner door cover panel for gas ranges. Protects internal door components. Replace if cracked, damaged, or missing to restore door appearance and function.

Replaces a cracked, bent, or missing cover panel on your gas range. Protects internal components and restores appearance. Encloses wiring securely.

Bracket that secures the door handle to your range. Replace if cracked, broken, or missing to properly mount and support the handle assembly.

Fix incomplete LED displays, F9 error codes, or cycle failures with this gas range main control board. Coordinates all electronic functions. Moderate DIY.

Fixes range that won't heat, displays errors, or has unresponsive controls. This power control board regulates oven and burner functions. Moderate difficulty repair.

This supporter is a small mounting bracket that holds internal components in place to keep assemblies aligned and reduce vibration. Replacing a damaged supporter restores proper fit and steadies moving parts for quieter operation. What it does:

• Secures internal assemblies or panels to the appliance frame to prevent shifting
• Maintains alignment so doors, drawers or moving parts track correctly
• Dampens vibration and reduces rattling or knocking noises from loose components
• Prevents wear or damage caused by parts moving out of position

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing exterior panels or covers; keep fasteners organized.
• Install with the correct screws and hand tools; do not over-tighten to avoid cracking the bracket.
• Inspect neighboring clips, screws and supports while replacing this part; replace any additional damaged hardware.

Wire harness for gas ranges. Connects electrical components inside your range. Replace if wires are frayed, damaged, or connections are loose or broken.

Wire harness for gas and electric ranges. Replaces damaged, frayed, or corroded wiring connections. Essential when harness is broken or melted.

Fix unresponsive buttons, blank displays, or partially lit clock numbers on your gas range. Control panel houses the electronic interface and mounting.

Parts assembly component for gas ranges. Replaces broken, damaged, or missing assembly pieces. Direct fit for compatible range models.

Replace cracked, stripped, or worn burner control knobs on your gas range. This knob assembly mounts on the control panel to adjust flame levels.

Circular lug that connects stripped wires to threaded terminals in microwaves. Replace if cracked, corroded, or missing to restore secure connections.

Replaces a cracked, chipped, or worn cooktop surface on your gas range. Restores appearance and protects burner components. Installs over main frame.

Secures the fuse in your microwave. Replace if melted, cracked, or causing poor fuse contact. Verify fit with your model number before ordering.

This heater cover is the protective housing that surrounds and shields the dryer heater assembly, helping direct airflow and preventing contact with the heating element for safer, more reliable operation. What it does:

• Protects the heating element from debris and accidental contact
• Helps channel hot air through the heater assembly for proper drying performance
• Reduces risk of shorting or arcing by keeping wiring and components separated
• Can help eliminate rattling or vibration caused by a damaged or loose heater housing

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the dryer/back panel or cabinet; keep fasteners organized
• Inspect the heater element and surrounding components for damage while replacing the cover
• If you smell burning or see visible damage, replace damaged parts and test on a dedicated circuit

Rubber bumper grommet for electric and gas ranges. Replaces cracked, worn, or missing grommets that cushion and support range components.

Replacement oven rack shelf that installs inside your range cavity. Needed when original rack is rusted, warped, or missing to restore cooking space.

Replace a burner tube if flames are uneven, yellow, or won't ignite properly on your gas range. Moderately easy repair restores proper gas flow.

Burner won't ignite or fires intermittently? This gas range igniter switch assembly detects spark signals to light burners. DIY-friendly repair.

Front grille assembly trim for gas ranges. Replaces cracked, broken, or missing lower front panel trim. Restores finished appearance at base.

Grille assembly for gas ranges. Covers the cooking surface and supports grates. Replace if warped, bent, cracked, or broken to restore proper pan placement.

Need an extra cooking surface on your gas range? This grille assembly adds a flat-top cooking area between burners. Heavy-duty cast construction.

Gas burner orifice nozzle for ranges and cooktops. Installs inside the burner box to meter gas flow. Replace if damaged, missing, or converting fuel type.

Fix weak flames or burners that won't light properly with this gas range burner nozzle. Controls gas flow for optimal flame performance. DIY install.

Fix uneven flames or weak burner heat with this gas range burner nozzle. Restores proper gas flow and prevents leaks. Direct replacement part.

Fix weak flames or burners that won't light properly with this gas burner nozzle. Controls gas flow for proper flame size. Simple install with basic tools.

Weak or uneven flames on your gas range? This burner orifice nozzle meters gas flow for proper flame size and consistent heating. Easy DIY fix.

Replace a gas range burner when flames are uneven, won't ignite, or produce yellow flames. Common repair that restores proper cooking performance.

Replace a gas range burner when flames are uneven, won't ignite, or produce yellow flames. Direct swap installation takes 10-15 minutes with basic tools.

Burner not heating or heating unevenly? This surface element restores full heat output on your range. Straightforward DIY fix in under an hour.

Controls gas flow to your range burner. Replace this valve assembly when the original is faulty, leaking, or damaged to restore safe gas regulation.

Gas range won't ignite or heat properly? This valve assembly controls gas flow to your oven and burners. Restores ignition and safe operation.

Fix burners or oven not lighting with this gas valve assembly. Controls gas flow to restore safe ignition and consistent heating in your range.

Gas valve assembly that controls and delivers gas to the burner. Mounts inside the range cabinet. Replace if cracked, leaking, or damaged to restore safe gas flow.

Burner head controls ignition and flame distribution on your gas range. Fixes weak flames, uneven heating, or burners that won't light properly.

Burner cap for gas ranges. Fits over the burner assembly to protect from debris and damage. Replace if cracked, chipped, or missing for proper operation.

Fixes uneven flames and improves heat distribution. This burner cap covers the burner head to direct flame properly and protect against debris buildup.

Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.

Range won't turn on or has no power? This power cord assembly replaces damaged or worn main power cables, restoring electrical connection. Direct fit.

Replace your range's wire harness if the existing wiring is damaged, frayed, or showing signs of wear. Connects electrical components inside your range.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.

Fixes uneven baking and noisy oven operation. This convection fan assembly circulates hot air for consistent cooking. Moderate DIY repair restores airflow.

Mica sheet that covers the microwave waveguide opening to protect against food splatter and moisture. Replace if burned, cracked, or damaged to prevent arcing.

Replace your burned-out or dim oven light bulb to restore interior visibility while cooking. Direct-fit incandescent lamp for safe food monitoring. Verify fit with your model number.

Gas range burner gasket seals burner assembly to prevent gas leaks. Replace if worn, cracked, or causing uneven flames. Verify fit with your model number.

Replace your range oven door gasket to restore proper heat sealing and improve cooking efficiency. Fits select electric and gas range models.

Fix F11 error codes or slow heating with this gas range oven igniter. Solves no-heat issues and temperature problems. DIY repair takes under 1 hour.

Burner nozzle holder for gas ranges. Secures the gas nozzle in place on the burner assembly. Replace if cracked, broken, or missing to restore proper fit.

Fix uneven flames or burners that won't light with this gas range burner nozzle. Meters fuel flow to each burner for balanced, consistent heating.

Fix weak flames or uneven heating with a new gas range burner orifice nozzle. Meters proper gas flow to burners. Common issue: mineral buildup clogs.

This burner assembly replaces a damaged or worn surface burner to restore reliable heating on your cooktop. It provides a direct-fit replacement that helps eliminate ignition issues and uneven cooking performance. What it does:

• Directs the flame or heating element to cookware for consistent heat transfer
• Replaces cracked, clogged, or damaged burner components that cause poor heating
• Helps stop ignition clicking or failed light-offs when the burner hardware is faulty
• Restores correct burner alignment for even flame distribution and safer operation

• Disconnect electrical power and, if applicable, the gas supply before starting work
• Handle electrodes and terminals carefully to avoid damage; ensure proper alignment during reassembly
• Use basic hand tools; keep screws and small parts organized for reinstall

Fix a burner that won't light or heat unevenly with this gas range burner assembly. Common repair for weak or inconsistent flames on cooktop surfaces.

Cracked or damaged heat shield affecting your range's heating? This cover protects the heating element and tub. DIY repair with 4 screws in under an hour.

Pressure regulator assembly for gas ranges. Mounts to the gas supply line to control fuel pressure. Replace if cracked, leaking, or damaged.

Replaces the bottom panel inside your range oven cavity. Install this base if your current panel is warped, stained, or damaged from spills and cleaners.

Replace a gas range burner assembly when burners won't ignite, flame is uneven, or heat distribution is poor. Restores safe, reliable cooking.

Base plate for electric and gas ranges. Provides structural support at the bottom of the range. Replace if cracked, warped, or damaged from wear.

Control panel assembly for gas ranges. Replaces damaged, cracked, or worn front panels. Direct replacement for broken control panel housings.

Rubber foot pad that supports and stabilizes your range on the floor. Replace if cracked, broken, worn, or missing to keep your appliance level.

Secures your range to the floor or wall to prevent tipping hazards. Replace if damaged or during installation. Verify compatibility with your model.

Replacement slider for range drawers and panels. Restores smooth movement when original is worn, cracked, or broken. Mounts to moving components for alignment.

Replace worn range drawer sliders to restore smooth, quiet operation and proper alignment. Prevents damage to surrounding trim. Confirm fit with your model.

Replace your gas range's damaged or broken storage drawer assembly. Essential when the drawer is cracked, warped, or no longer slides properly.

Wire harness for gas ranges. Connects electrical components inside the unit. Replace if wires are frayed, damaged, or connections are loose or broken.

Fix a gas range that won't heat or has weak flames with this safety valve. Controls gas flow to burners. Moderate DIY repair with basic hand tools.

Mounting anchor for range door handles. Replaces worn, broken, or missing anchors to restore secure handle attachment and eliminate wobbling or loose fit.

Factory parts assembly for gas ranges. Restores original components and fit. Replace if assembly is damaged, worn, or broken to return proper operation.