Parts for Lg LLMXS3006S/00: Cycle Parts

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

This rear door handle replaces the damaged or worn handle on compatible LG appliances, restoring a secure grip and proper door operation. Durable molded construction matches factory fit for a clean, factory-original appearance. What it does

• Replaces a cracked, loose, or broken rear door handle to restore safe door gripping and operation
• Provides the mounting surface and attachment points used by the factory rear handle assembly
• Helps eliminate rattling or misalignment caused by a damaged handle
• Fits where the original rear handle attaches to the appliance door frame

• One rear handle

• Basic hand tools required; remove power and follow factory service manual for safe disassembly
• Keep fasteners and clips in order; replace any damaged hardware with OEM parts
• Handle mounting faces the interior rear of the door—verify orientation before tightening

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Ice not dispensing or spilling? This refrigerator ice storage bucket collects and holds ice from your ice maker. Simple DIY install in 10 minutes.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Drawer tray assembly for bottom-mount refrigerators. Replaces cracked, broken, or warped trays in the lower fresh food compartment or crisper section.

Replacement crisper drawer tray assembly for bottom-mount refrigerators. Restores produce storage when original is cracked, warped, or broken.

Replaces cracked, broken, or warped drawer tray in your bottom-mount refrigerator. Restores stable storage surface and smooth drawer operation.

Replace a cracked, broken, or missing shelf assembly in your bottom-mount refrigerator. This structural component installs inside the fresh food compartment.

Replacement supporter cover for bottom-mount refrigerators. Secures internal panels and restores proper alignment. Needed when original is cracked or missing.

Replacement shelf assembly for your bottom-mount refrigerator. Installs inside the fresh food compartment. Order when original is cracked or broken.

Interior shelf assembly for bottom-mount refrigerators. Replace cracked, broken, or warped shelves to restore organized storage in your fridge.

Reduces food odors in your refrigerator's fresh-food compartment by neutralizing smells at the source. Replace when odor control becomes less effective.

Refrigerator drawer cover panel that sits on the front of your crisper or storage drawer. Replace if cracked, broken, discolored, or missing.

Drawer guide rail for bottom-mount refrigerators. Installs along the drawer sides to help drawers slide smoothly. Replace if cracked, broken, or worn.

Drawer guide rail for bottom-mount refrigerators. Mounts inside the cabinet to support and align drawers during opening and closing. Replace if cracked or worn.

Guides your refrigerator drawer for smooth, aligned movement. Replace if drawer sticks, wobbles, or makes noise. Verify fit with your model number.

Replacement air filter housing assembly for bottom-mount refrigerators. Installs inside the fresh food compartment. Replace if cracked, broken, or missing.

Replacement crisper pan for bottom-mount refrigerators. Stores and organizes fruits and vegetables in the crisper drawer. Needed when original is cracked, warped, or missing.

Replacement insert tray for refrigerator crisper drawers. Organizes and contains fresh produce. Install when original is cracked, broken, or missing.

Replaces damaged or cracked rear TV housing cover on your bottom-mount refrigerator. Restores cabinet fit and protects internal components and wiring.

Dim or uneven refrigerator lighting? This lamp cover protects and diffuses your interior light. Direct-fit replacement lens, simple installation.

Replace worn drum support rollers to restore smooth, quiet dryer operation. Reduces squeaking and rubbing sounds while maintaining proper drum alignment. Confirm fit with your model number.

Rail guide assembly for bottom-mount refrigerator drawers. Ensures smooth drawer glide operation. Replace if cracked, broken, or causing misalignment.

Fix refrigerator door misalignment or poor sealing with this door alignment magnet. Restores magnetic retention to keep panels and components secure.

Factory door foam insulation assembly for bottom-mount refrigerators. Replace when compressed, torn, or missing to restore proper sealing and reduce condensation. Confirm fit with your model number.

Replaces worn freezer door insulation to restore thermal seal and reduce frost buildup. Install when cooling efficiency drops or frost forms excessively. Confirm fit with your model number.

Seals your refrigerator door to maintain temperature and reduce energy loss. Replace when worn, cracked, or causing frost buildup. Confirm fit with model.

Restore a tight door seal and prevent air leaks with this refrigerator door gasket. Replace when you notice frost buildup, condensation, or warm temps inside. Confirm fit with your model number.

This cover cap conceals screws or mounting hardware on your refrigerator. Replace if cracked, broken, missing, or discolored to restore a clean appearance.

Plastic cover cap for refrigerators. Snaps onto shelves, hinges, or trim to conceal screws and mounting hardware. Replace if cracked, broken, or missing.

Left-side door handle trim for refrigerators. Restores finished appearance and edge protection. Replaces cracked, scratched, or missing trim pieces.

Exterior trim piece for refrigerator door handle. Replaces cracked, scratched, or worn decorative trim to restore original appearance and finish.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Replaces worn door foam insulation to restore thermal efficiency and reduce frost buildup. Install when door feels warm or condensation appears inside. Confirm fit with your model number.

Door foam assembly that installs inside your refrigerator door panel. Replace if foam is compressed, deteriorated, or missing to restore proper insulation.

Seals the refrigerator door to keep cold air in and warm air out. Replace if worn, torn, or moldy to restore proper temperatures and efficiency.

Replaces worn door gasket to restore airtight seal, prevent warm air leaks, reduce frost and condensation. Check your model number for proper fit.

Restores your refrigerator's exterior appearance and protects internal components. Replace when cracked, dented, or missing to maintain proper seal. Confirm fit with your model number.

Replacement door basket assembly for bottom-mount refrigerators. Organizes items in the door compartment. Replace if cracked, broken, or missing.

Replacement door basket assembly for refrigerator doors. Restores storage for bottles, jars, and condiments. Replaces cracked, broken, or missing bins.

Replacement door basket for bottom-mount refrigerators. Mounts inside the door to hold bottles and jars. Replace if cracked, broken, or missing.

Replaces a broken or missing door stopper assembly on your refrigerator. Cushions door movement and holds the door in position to prevent slamming.

Mounts at the hinge to control door opening range and promote smooth closing. Replace if cracked, broken, or worn to restore proper door swing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replaces worn or broken lower door hinge that no longer provides proper tension. Installs at the bottom center of French door refrigerators to pivot and support the door. Essential for smooth door operation and proper seal.

Refrigerator shelf rail connector that secures shelf rails to the interior liner. Replace this connector if it's cracked, broken, or missing to stabilize shelves.

If your refrigerator's ice maker or dispenser isn't advancing properly, a worn drive gear is often the cause. This direct-fit gear restores smooth rotation.

Secures wiring harness to refrigerator chassis. Replace if clip is cracked, broken, or missing to keep electrical connections stable and organized.

Right-side drawer slide rail for bottom-mount refrigerators. Replaces broken, cracked, or worn rails that prevent smooth drawer operation.

Drawer slide rail enables smooth gliding of refrigerator shelves and drawers. Replace if drawers stick, wobble, or won't slide properly. Verify fit with your model.

Ice maker not ejecting ice or tray not rotating? This drive gear restores the ice maker cycle. Simple DIY fix in under 30 minutes with basic tools.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Replace your refrigerator's center hinge assembly to restore proper door alignment and ensure smooth operation. Fits select bottom-mount models. Verify compatibility.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Secures and aligns your refrigerator door for smooth opening and proper sealing. Replace if door sags or closes unevenly. Verify fit with your model number.

Secures and aligns the top refrigerator door for smooth opening and proper sealing. Replace when door sags or won't close properly. Verify fit with your model.

Seals and finishes the duct opening in your refrigerator, directing airflow properly. Replace if cracked, loose, or missing to restore secure connections.

Lever spring for bottom-mount refrigerators. Provides tension for internal lever mechanisms. Replace if broken, stretched, or missing to restore proper fit.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Microwave door won't latch or release properly? This lever holder bracket secures the door lever assembly to restore smooth door operation. Easy DIY fix.

If your refrigerator lever won't return to position or feels loose, this lever return spring restores proper tension for smooth operation. Direct-fit part.

Water funnel assembly for bottom-mount refrigerators. Directs water flow in the ice and water dispenser system. Replace if cracked or damaged.

Replacement door hinge spring for refrigerators. Provides tension for smooth door opening and secure closure. Replace if door sags or won't stay closed.

Fix a dispenser lever that won't activate ice or water flow. This refrigerator dispenser lever restores easy push-button operation in minutes.

Fix your refrigerator not cooling properly with this evaporator coil assembly. Restores proper refrigeration when frost buildup or warm temps occur.

Refrigerator won't cool or compressor won't start? This overload protector prevents compressor damage from overheating or power surges. Easy DIY fix.

Fix incorrect temperature readings or inconsistent cooling with this refrigerator thermistor assembly. Moderately easy repair for bottom-mount models.

Secures small moving parts and assemblies in refrigerators. Replace if the original pin is bent, broken, or missing to restore proper alignment.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Replacement drip tray for bottom-mount refrigerators. Installs beneath the unit to catch condensation. Replace if cracked, missing, or worn out.

If your refrigerator has uneven cooling or fan noise, the fan guide may be damaged. This part channels airflow properly and prevents blade rubbing.

Fixes refrigerator running warm or compressor area overheating. This fan motor assembly circulates air over the condenser coils to regulate temperature.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Replacement drain tray assembly for bottom-mount refrigerators. Collects defrost water beneath the unit. Replace if cracked, warped, or missing.

Protective front cover panel for refrigerators. Installs on the exterior to conceal components. Replace if cracked, broken, or missing.

Protects motor and drive components from debris and accidental contact. Shields internal machinery at the back of the tub for safer operation.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix refrigerator not cooling, temperature fluctuations, or display errors with this main control board. Moderately challenging repair for bottom-mount models.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Fixes intermittent power issues or component failures in your refrigerator. This electrical connector assembly restores secure wiring between components.

Fix freezer light staying on or not turning on when door opens. This magnetic reed switch detects door position. Located on freezer wall, easy DIY.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Fix frost buildup in your refrigerator with this defrost heater sheath. Restores proper defrost cycles and prevents ice accumulation. DIY repair.

Illuminates refrigerator interior when door opens. Replace when light dims, flickers, or fails to restore bright visibility. Verify fit by model number.

Replace a damaged or non-functioning refrigerator power cord assembly. Restores electrical connection when your fridge won't turn on or power on.

Fix a refrigerator that won't power on or has no display with this main power control board assembly. Restores electronic control and power distribution.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.

Ice maker stopped making ice or won't shut off when bin is full? This assembly automates the fill, freeze, and harvest cycle to restore ice production.

Fix a refrigerator that stopped making ice or produces slow, irregular ice cycles. This ice maker assembly restores automatic ice production. Moderate DIY.

Fix warm refrigerator or noisy operation with this evaporator fan motor assembly. Restores proper airflow and temperature control in your fridge.

Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Ice bin cracked, warped, or causing weak dispensing and jams? This ice bucket assembly stores and delivers ice to your dispenser. Easy DIY repair.

This dispenser lever is the user-operated push arm that activates a refrigerator's water or ice dispenser. It replaces a broken or worn lever so the dispenser responds correctly when pressed. What it does:

• Acts as the push actuator for the fridge water/ice dispenser
• Transfers user pressure to the dispenser switch/valve so water or ice is released
• Restores proper alignment and feel if original lever is cracked, loose, or missing
• Fits into the dispenser housing and connects to the dispenser mechanism

• One dispenser lever

• Disconnect power to the appliance before starting any repair
• Remove the dispenser bezel or front panel per your model's service instructions to access the lever
• Inspect surrounding clips and pins; replace any damaged fasteners for a secure fit

Ice maker stopped making ice or dispenser not working? This ice dispenser assembly includes the complete ice maker unit. Fixes inconsistent ice production.

Fix water leaking from your refrigerator door with a new water tank reservoir. Located behind the bottom door panel, this tank supplies your dispenser.

Plastic water supply tube for bottom-mount refrigerators. Connects water line to dispenser or ice maker. Replace if cracked, leaking, or broken.

Pipe holder bracket for bottom-mount refrigerators. Secures refrigerant or water lines in place. Replace if cracked, broken, or missing to prevent lines from sagging or vibrating.

Connects water tubing inside your refrigerator to supply the ice maker and water dispenser. Replace if cracked, leaking, or unable to hold tubing securely.

Plastic water supply tube that connects the main water line to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged.

Fix a refrigerator that's not dispensing water or making ice with this water inlet valve assembly. Controls water flow to dispenser and ice maker.

Fix ice maker overflows, water leaks, or no water to dispenser. This inlet valve controls water flow from your supply line. DIY-friendly repair.

Fix poor water taste or slow flow with this refrigerator water filter assembly. Includes activated carbon blocks and internal water valve components.

Fix no ice, slow water flow, or leaking issues with this refrigerator water inlet valve. Controls water supply to ice maker and dispenser.

Fix refrigerator cooling issues with this gas valve assembly. Direct replacement part for bottom-mount and side-by-side models. Moderate DIY repair.

Fix no water or ice issues with this refrigerator water valve assembly. Controls water flow to icemaker and dispenser. Moderate DIY repair in 30-45 minutes.

Plastic trim cap that snaps over exposed fasteners and mounting posts on your refrigerator. Replace if cracked, broken, missing, or discolored.

Fix water dispenser leaks or no ice with this inline water connector tube. Joins refrigerator water lines to restore secure flow. Simple repair.

Water line tube connector for bottom-mount refrigerators. Replaces cracked, leaking, or broken connectors that secure water supply tubing connections.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

Fix water leaking from your refrigerator's filter area with a new filter head assembly. Solves filter connection issues and slow water flow. DIY repair.

Plastic clip secures tubing and pipes inside your refrigerator. Replace if cracked, broken, or missing to keep lines properly routed and organized.

Replacement door hinge assembly for your refrigerator. Installs on the cabinet to support the door. Replace if cracked, bent, or worn for proper alignment.

Molded door shelf cover for the home bar compartment. Replaces cracked, broken, or missing covers. Installs on the refrigerator door for a finished look.

Secures and supports refrigerator door pivot for proper alignment and smooth operation. Replace when door sags, seals poorly, or binds. Confirm fit with model.

Freezer door won't lock or close securely? This lever cover protects the door lock mechanism from wear and impact damage. Easy DIY installation.

Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.

Seals the ice bank door to prevent warm air from melting ice and causing clumping. Replace if ice melts, refreezes into clumps, or frost forms around the bin.

Replaces worn air filter in your bottom-mount refrigerator to reduce odors and maintain fresh air in the food compartment. Replace when filter is clogged or every 6 months. Check model compatibility before ordering.