Parts for Lg LFXC22526D/04: Door Parts

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Water funnel assembly for bottom-mount refrigerators. Directs water flow in the ice and water dispenser system. Replace if cracked or damaged.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Ice not dispensing or spilling? This refrigerator ice storage bucket collects and holds ice from your ice maker. Simple DIY install in 10 minutes.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Supports and guides sliding refrigerator drawers or shelves for smooth rolling. Replace if worn, cracked, or causing wobbling, sticking, or noise.

Dual roller wheel assembly that mounts to the rear wall of the freezer drawer. Replace when wheels are missing, broken, or cracked for smooth sliding.

Replacement drawer pan that supports items inside your refrigerator drawer. Install when original is cracked, warped, sagging, or broken to restore storage.

Replaces a cracked, warped, or broken drawer tray in your bottom-mount refrigerator. Restores stable storage support and smooth drawer operation.

Replaces a cracked, warped, or broken drawer tray in your bottom-mount refrigerator. Restores stable storage support and smooth drawer operation.

Replace a cracked, broken, or missing right-side refrigerator shelf. Restores safe, level storage for food containers and everyday items in your fridge.

Left-hand shelf assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing shelves. Installs inside fresh food compartment.

Left side door shelf assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing shelves. Installs on left door interior.

Replace your refrigerator's mesh shelf net when torn or stretched to restore organization and prevent items from falling through. Verify fit with your model.

Replacement door shelf net that secures small items in your refrigerator door. Installs on door shelf to replace cracked, stretched, or missing nets.

Replaces the outer cabinet panel on your bottom-mount refrigerator. Restores appearance and structural support when the original is cracked, broken, or missing.

Replacement shelf holder for bottom-mount refrigerators. Secures and supports shelves in place. Needed when original is cracked, broken, or missing.

Supports the fresh room crisper drawer area and contains spills in your refrigerator. Replace this tray if cracked, warped, or broken to restore drawer fit.

Molded plastic cover that protects the internal tray area in your refrigerator. Replaces cracked, warped, or missing covers to restore containment.

Replaces a cracked, broken, or missing tray cover in your bottom-mount refrigerator. Restores a finished appearance and protects the tray area.

Deli drawer front cover panel for LG bottom-mount refrigerators. Replaces cracked, broken, or discolored decorative cover. Clips onto panel.

Snap-on trim piece that conceals mounting screws and fasteners on your refrigerator. Replace this cover if cracked, broken, or missing to restore appearance.

Replaces a cracked, broken, or missing crisper drawer in your refrigerator. Restores proper storage space for fresh produce and vegetables.

Replacement crisper drawer for bottom-mount refrigerators. Restores proper storage for fresh produce when original is cracked, broken, or missing.

Refrigerator lamp cover protects the interior light bulb. Replace if cracked, discolored, or broken to restore proper lighting. Verify fit with model.

Dim or uneven refrigerator lighting? This lamp cover protects and diffuses your interior light. Direct-fit replacement lens, simple installation.

Replaces a cracked, broken, or missing tray cover in your bottom-mount refrigerator. Protects tray surface and prevents spills or contamination.

Supports and guides refrigerator drawers or racks for smooth sliding. Replace if your guide is cracked, broken, worn, or causing misalignment or detachment.

Replaces worn or damaged drawer slide rail in bottom-mount refrigerators. Restores smooth gliding and proper alignment when original is cracked or broken.

Freezer running constantly or building frost? This door foam assembly restores the thermal barrier to stop cold air leaks and reduce compressor runtime.

Fix warm fridge temps and frost buildup with this refrigerator door gasket. Creates an airtight seal to keep cool air inside. DIY-friendly install.

Decorative door trim handle for refrigerator doors. Replaces scratched, cracked, or worn trim pieces to restore a finished look and easier grip.

Decorative trim cover that fits over your refrigerator door handle. Replace if cracked, discolored, or missing to restore your handle's appearance.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Molded insulation insert that fits inside refrigerator doors to restore thermal barrier and reduce condensation. Replace when foam is compressed or damaged.

Seals the gap between door and cabinet to keep cold air in. Replace if you notice air leaks, frost buildup, or a loose door seal. Confirm fit with your model number.

Seals the refrigerator door to prevent cold air leaks, frost buildup, and temperature fluctuations. Replace if torn, cracked, or no longer sealing tightly.

Connects French doors on refrigerators. Replace if cracked, broken, or spring-damaged. Installs between doors to maintain proper seal alignment.

Drawer guide rail for bottom-mount refrigerators. Installs on the drawer frame to ensure smooth sliding. Replace if cracked, broken, or worn out.

Replacement door basket for bottom-mount refrigerators. Restores door storage when original bin is cracked, broken, or missing. Holds bottles and condiments.

Clear plastic storage basket that mounts inside your refrigerator door. Holds condiments, spreads, and small items. Replace if cracked, broken, or missing.

Clear plastic storage bin that mounts inside refrigerator door. Replace if cracked, broken slide pegs, or loose assembly from temperature changes.

Door stopper assembly for refrigerators. Installs on the door to limit opening angle and prevent wall damage. Replace if cracked, broken, or missing.

Door stop assembly for bottom-mount refrigerators. Mounts inside the door to control door closing and sealing. Replace if broken, cracked, or missing.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Fix loose wiring or electrical connection issues in your refrigerator with this connector rail. Secures and organizes wire harnesses for reliable operation.

Mounting rail that holds and aligns connector assemblies inside your refrigerator. Replace if cracked, broken, or missing to restore secure fit.

Guides and supports refrigerator drawers as they slide in and out. Replace if your rail is cracked, broken, or worn to restore smooth drawer movement.

Drawer slide rail allows refrigerator shelves and drawers to glide smoothly. Replace if drawers stick, wobble, or won't close properly. Verify fit with model.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Secures and pivots your refrigerator door at the top for proper alignment and smooth operation. Replace if door sags or seals poorly. Verify fit.

Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:

• Supports the refrigerator door and allows it to pivot smoothly.
• Replaces worn, bent, or damaged hinges that cause door sag or misalignment.
• Helps reduce noisy or grinding door operation when the hinge is failing.
• Promotes an even door seal to help maintain internal temperature consistency.

• Unplug the appliance and remove food from nearby shelves before starting work.
• Support the door while removing hinge fasteners to prevent dropping or damage.
• Reinstall using the original hardware; align the door and tighten fasteners securely but avoid overtightening.

Seals and finishes the duct opening in your refrigerator, directing airflow properly. Replace if cracked, loose, or missing to restore secure connections.

Lever spring for bottom-mount refrigerators. Provides tension for internal lever mechanisms. Replace if broken, stretched, or missing to restore proper fit.

If your refrigerator lever won't return to position or feels loose, this lever return spring restores proper tension for smooth operation. Direct-fit part.

Fix a non-responsive or broken dispenser button with this push-style lever. Restores tactile feedback and control input. Simple snap-in replacement.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Fix a refrigerator not cooling or freezing over with a new evaporator coil assembly. This part circulates refrigerant to cool your fridge compartments.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fixes refrigerator running warm or compressor area overheating. This fan motor assembly circulates air over the condenser coils to regulate temperature.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Drain tray assembly that collects condensation beneath your refrigerator. Replace if cracked, broken, or missing to prevent water leakage issues.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

Rear machinery compartment cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing covers that protect compressor components.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:

• Holds a cover, panel, or door-related component in proper position to prevent shifting
• Reduces noise caused by loose or vibrating parts
• Restores original fit where a broken or missing clip allows movement
• Simple mechanical function — no electrical connections or calibration

• One restrainer

• Disconnect power (and water if applicable) before beginning repairs
• Inspect surrounding mounting points for damage; replace any broken tabs or fasteners
• Typically installs with basic hand tools; align clip and press or snap into place until secure

Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

Refrigerator not cooling evenly or making excessive noise? This fan grille assembly protects the evaporator fan and directs airflow for proper cooling.

Fix refrigerator lights staying on or not turning off when door closes. This magnetic door switch is a common solution. Simple DIY repair in 15 minutes.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Refrigerator making loud noise or not cooling evenly? This fan assembly circulates air to eliminate hot spots and restore consistent temperatures.

Fix warm refrigerator or freezer temps with this evaporator fan motor assembly. Circulates cold air throughout compartments. Located behind freezer wall.

Replace a damaged or missing motor cover on your bottom-mount refrigerator. Protects the compressor motor from dust and debris. Simple installation.

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Fix unusual noises or warm temperatures caused by a loose evaporator fan motor. This mounting bracket secures the circulation fan in your refrigerator.

Fix ice buildup in your refrigerator with this defrost heater. Melts frost from the evaporator during defrost cycles to restore consistent cooling.

Fix a dim or flickering refrigerator interior with this LED light assembly. Direct replacement part restores bright, even lighting in minutes.

Illuminates your refrigerator display for clear, even brightness. Replace when you notice dark spots, dim areas, or missing segments on the screen. Verify fit with your model number before ordering.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

Fixes unresponsive control panel and loss of cooling functions. This main power control board restores electronic controls in your bottom-mount refrigerator.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Fix your refrigerator when it stops making ice or produces small/hollow cubes. Complete ice maker assembly kit includes bin and mounting hardware.

Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.

Ice maker stopped making ice or won't shut off when bin is full? This assembly automates the fill, freeze, and harvest cycle to restore ice production.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Refrigerator not cooling properly? A failed evaporator fan motor stops cold air circulation. This motor replacement restores airflow across the coils.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.

If ice spills in your freezer or the dispenser won't pick up ice, this refrigerator ice bucket assembly restores proper storage and delivery.

This dispenser lever is the user-operated push arm that activates a refrigerator's water or ice dispenser. It replaces a broken or worn lever so the dispenser responds correctly when pressed. What it does:

• Acts as the push actuator for the fridge water/ice dispenser
• Transfers user pressure to the dispenser switch/valve so water or ice is released
• Restores proper alignment and feel if original lever is cracked, loose, or missing
• Fits into the dispenser housing and connects to the dispenser mechanism

• One dispenser lever

• Disconnect power to the appliance before starting any repair
• Remove the dispenser bezel or front panel per your model's service instructions to access the lever
• Inspect surrounding clips and pins; replace any damaged fasteners for a secure fit

If your refrigerator is making loud noises or not cooling properly, the AC motor may have failed. This motor powers essential cooling components.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Replaces cracked or leaking water line connector tubes in refrigerators. Restores proper water flow between components. Confirm fit with your model number.

Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.

Fix ice maker not filling or water dispenser not working with this refrigerator water inlet valve assembly. Solves leaks and no-water issues. DIY repair.

Fix no water or ice issues with this water inlet valve. Common when ice maker won't fill or dispenser trickles. Easy 10-minute DIY with video guide.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Plastic cover cap for bottom-mount refrigerators. Snaps over mounting screws or fasteners to conceal hardware. Replace if cracked, broken, or missing.

Secures bracket assemblies inside your refrigerator to keep components aligned and reduce vibration. Replace if cracked, bent, or missing.

Secures and protects your refrigerator's internal air filter while maintaining proper airflow. Replace if cracked or loose to restore the sealed fit.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

Replace a broken or leaking water filter housing that prevents water flow to your dispenser and ice maker. Direct fit for bottom-mount refrigerators.

Secures and protects your refrigerator's air filter, maintaining proper airflow and filtration. Replace if cracked or loose. Verify fit with your model.

Complete freezer door assembly for bottom-mount refrigerators. Replaces cracked, dented, or damaged freezer doors. Includes door shell and inner components.

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.

Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

Freezer door won't lock or close securely? This lever cover protects the door lock mechanism from wear and impact damage. Easy DIY installation.

Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.

Seals the ice bank door to prevent warm air from melting ice and causing clumping. Replace if ice melts, refreezes into clumps, or frost forms around the bin.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.