Parts for Whirlpool WRT311FZDB01: Door Parts

Color: Black

Note: This is a 2 door kit with both the Refrigerator and Freezer doors.
 

Color: Bisque

Note: This is a 2 door kit with both the Refrigerator and Freezer doors.
 

Color: Stainless
Note: This is a 2 door kit with both the Refrigerator and Freezer doors.
 

Color: White

Note: This is a 2 door kit with both the Refrigerator and Freezer doors.

Color: Bisque

Color: Grey

The Handle End Cap is an OEM part for Whirlpool refrigerators. It covers and protects the end of the refrigerator's door handle.

A bad door handle end cap can be caused by regular wear and tear, accidental damage, or exposure to harsh cleaning chemicals. If you notice cracks, discoloration, or a loose fit of the end cap on your refrigerator's door handle, it may indicate a problem with the cap itself.

Symptoms of a bad door handle end cap include:

• Cracked or damaged 
• Discoloration or fading 
• Loose or wobbly fit on the handle

Replace your faulty door handle end cap with this genuine OEM part to restore your refrigerator's handle. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Color: Black

Color: White

Color: Bisque

The Handle is an OEM component specifically designed for Whirlpool refrigerator doors. It provides an easy grip for opening and closing access to the interior compartments. Proper handle functioning allows convenient operation of the refrigerator.

Causes of failure typically include normal wear of handle mounting attachment points from continual lifting/pulling stresses over many years. Exposure to heat or cleaning chemicals may also degrade handle components more rapidly.

Symptoms of a bad handle include:  

• The handle cracking, warping, or detaching from the door
• Difficulty opening/closing the refrigerator door  
• Obstructions when moving the door due to alignment issues

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Black

The Handle is an OEM part for Whirlpool refrigerators. It provides a durable and secure grip for opening and closing the refrigerator door. This handle is designed to match the specific aesthetic and functional requirements of Whirlpool models, ensuring a seamless fit and maintaining the overall design integrity of the appliance.

Over time, handles can become loose or damaged due to frequent use, accidental impacts, or material degradation. A compromised handle may not only affect the usability of the refrigerator but can also pose safety risks by potentially breaking off when force is applied.

Symptoms of a bad Handle include:

• Looseness or wobbling when touched or used 
• Visible cracks or breakage 
• Difficulty in opening or closing the door due to a poor grip 
• The handle coming off completely when pulled

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This Handle is an OEM part designed specifically for Whirlpool brand refrigerators. It refers to the external access handle used for opening and closing the refrigerator door.

Symptoms of a faulty handle include:

• Difficulty smoothly opening or shutting the refrigerator door
• Detached, loose, or dysfunctional handle components  

Potential causes are typical wear from heavy use over time. Moisture infiltration from gasket leaks can corrode internal handle mechanics as well.

Compatible models include some produced by KitchenAid, Maytag, Jenn-Air, and Kenmore.

The Screw is an OEM fastening component specifically designed for securing interior panels and assemblies of Whirlpool brand appliances. 

Causes of a problematic screw include stripping, corrosion, or shearing from repeated installations and removals during service procedures.

Symptoms of faulty screws include:

• Loosened or detached interior panels rattling behind appliance exteriors  
• Reduced structural integrity allowing unnecessary vibrations and noise

Compatible models include brands produced by KitchenAid, Maytag, and some Kenmore.

Color: Grey

The Fresh Food Door Gasket is an OEM part for Whirlpool refrigerators. It is a replaceable sealing strip located around the fresh food compartment door that helps maintain cool temperatures inside.

Causes of a bad gasket can include breakdowns in the adhesive over time allowing air gaps, or physical damage such as cracks or punctures compromising the seal. 

Symptoms of a faulty gasket include:

• Frost or moisture condensation building up inside  
• Higher energy bills from the compressor running excessively
• Warm air freely entering/exiting around the perimeter 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White

The Gasket-Fip is an OEM component designed specifically for Whirlpool refrigerators. This freezer's inner panel gasket seals the connection between the fridge door and the cabinet

Causes of a bad gasket can include cracks, warping, or compressing of the gasket material over many freeze-thaw cycles. Without a proper seal, cold air can escape and warmer air can enter the freezer compartment.

Symptoms of a bad gasket include:

• Ice or frost buildup inside the freezer door or around the door seal
• Freon lines on the back panel sweating or feeling warm 
• Unexpected temperature rises in the freezer

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore models. 

The Door Gasket is an OEM part for Whirlpool refrigerators. This gasket forms an important seal around the refrigerator door, preventing warm air from entering the sealed interior compartment. Maintaining proper temperature and humidity levels inside depends on an intact, well-sealed door gasket.

Causes of a bad door gasket can include cracks, tears or deterioration over time due to exposure and normal compression/expansion cycles. Food particles or debris trapped against the gasket can also damage sealing integrity.

Symptoms of a bad door gasket include:

• Difficulty closing or sealing the door properly
• Higher electric bills from the refrigerator running more often
• Warm air leaking into the refrigerator sections
• Loss of interior temperature regulation

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Fresh Food Door Gasket is an OEM part for Whirlpool refrigerators. It seals the refrigerator door, keeping cold air inside and preventing warm air from entering, which helps maintain the proper temperature and efficiency of the refrigerator.

You should replace the fresh food door gasket if it becomes damaged or worn out. Common causes of a bad gasket include wear and tear from regular use, exposure to temperature fluctuations, or physical damage from cleaning or handling.

Symptoms of a bad fresh food door gasket include:

• The refrigerator door not sealing properly
• Increased energy consumption
• Frost or condensation buildup around the door
• Visible cracks, tears, or deformation of the gasket

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This white door shelf trim is the front retainer for a refrigerator door shelf. It replaces a broken or missing rail to restore a secure edge that helps keep bottles and jars from sliding out. What it does:

• Acts as the front rail that snaps into the door liner to retain items on the shelf
• Helps prevent items from falling when the door is opened or closed
• Replaces cracked, warped, loose, or missing trim/end caps
• Common symptoms: broken or missing bar, trim won't stay seated, items fall from the door shelf

• One white door shelf trim with end caps

• Disconnect power and remove items from the affected door shelf before starting
• Gently release the old trim/end caps from the liner tabs—avoid prying directly on the door liner
• Align the new trim with the slots and snap/slide firmly into place until secure
• If plastic is cold/brittle, allow it to warm to room temperature and handle carefully

Color: Grey

This door trim is the molded finishing frame for the appliance door. Replacing a cracked, warped, or missing trim restores a clean look and helps keep door components properly aligned for a secure fit.

• Finishes the door edge and conceals gaps or fasteners for a clean appearance
• Depending on model, helps retain the outer panel or glass window
• Helps maintain proper alignment and feel of the door assembly
• Common symptoms: cracked/chipped trim, loose or rattling piece, gaps or sharp edges, cosmetic damage

• Disconnect power before servicing; shut off gas/water if applicable
• Protect the door and any glass; support the door if removal is required
• Transfer any clips, seals, or screws from the old trim; match the original orientation
• Secure the trim without overtightening and verify smooth door closing/latch alignment

Color: Bisque

Note: This is a 2 door kit with both the Refrigerator and Freezer doors.
 

Color: Black

Note: This is a 2 door kit with both the Refrigerator and Freezer doors.
 

Color: Stainless
Note: This is a 2 door kit with both the Refrigerator and Freezer doors.
 

Color: White

Note: This is a 2 door kit with both the Refrigerator and Freezer doors.

Color: Bisque

Color: Black

Color: Grey

Color: White

The Hole Plug is an OEM part for Whirlpool refrigerators. It plays an important role in sealing openings and holes within the refrigerator door. The plug prevents air leaks, moisture intrusion, and loss of cool air that could compromise cooling performance. 

Symptoms of a bad or missing door hole plug include:

• Increased humidity and moisture buildup inside the refrigerator  
• Difficulty maintaining proper internal temperatures
• Formation of frost or ice around door openings

Causes can be normal wear and tear over time that damages or dislodges the plug. Accidental impact or damage during cleaning could also dislodge it.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This door handle thimble is a small spacer/bushing used on select refrigerator and freezer doors. It sets the correct stand-off for the handle hardware so the handle mounts securely, aligns properly, and feels solid in use.

• Spaces and aligns the door handle to the correct distance from the door
• Supports the handle mounting stud/screw for a secure fit
• Helps reduce handle wobble, gaps, or scuffing against the door
• Replace if the handle won't tighten evenly or the original thimble is cracked, worn, or missing

• Disconnect power before servicing the appliance
• Support the handle to protect the door finish during removal
• Loosen the handle's set screw(s) or mounting bolt, remove the old thimble, and clean the area
• Seat the new thimble fully, reinstall hardware, and tighten evenly—do not overtighten

Color: Apollo Grey

Color: White

The Freezer Door Gasket is an OEM part for Whirlpool freezers. This gasket forms a tight seal around the freezer door, keeping the cold air inside and preventing warm air from entering, which helps to maintain the optimal temperature and efficiency of the freezer. The gasket measures approximately 20.19” x 31.29” Color: Misty Beige. For Black order 217731

Causes of a bad door gasket can include regular wear and tear, exposure to extreme temperatures, mold or mildew buildup, and physical damage from repeated opening and closing of the door. 

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• The freezer running more frequently to maintain temperature
• Difficulty keeping the door closed or it not sealing properly
• Visible cracks, tears, or deformation in the gasket

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Freezer Door Gasket (Black) is an OEM part for Whirlpool refrigerators. This part ensures an airtight seal around the freezer door. This gasket prevents warm air from entering and cold air from escaping the freezer compartment, playing a crucial role in maintaining the freezer's internal temperature. The gasket measures approximately 20.19” x 31.29”.

Causes of a bad Freezer Door Gasket can include natural aging and wear over time, exposure to extreme temperatures that can degrade the material, and physical damage from cleaning or heavy use.

Symptoms of a bad Freezer Door Gasket include:

• Visible cracks, tears, or wear in the gasket, leading to poor sealing
• Condensation or ice buildup around the door edges, indicating air leaks
• Difficulty in maintaining the freezer's set temperature, resulting in increased energy consumption
• The freezer door not closing properly or feeling less resistant to opening

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement screw secures panels, brackets, or trim within your appliance. Replacing a worn, stripped, or missing screw restores a tight, rattle-free fit so components stay aligned and operate as intended. What it does:

• Fastens components at the original factory locations specified for this part
• Replaces missing, damaged, or stripped screws to restore holding power
• Helps reduce vibration and rattling from loose parts
• Maintains proper alignment of panels, covers, brackets, and trim

• Disconnect power (and gas, if applicable) before servicing
• Match to the original screw and install in the same location and orientation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver or nut-driver; transfer any washers or spacers from the original hardware if present

The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.

Symptoms of a bad Bracket-Door Stop include:

• The door overextending when opened
• Difficulty in maintaining the door's position
• Visible bending, cracking, or damage to the bracket

Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Screw is an OEM part for Whirlpool refrigerators, designed to secure components of the ice maker assembly. This screw maintains the structural integrity of the ice maker, ensuring that all parts are tightly fastened to prevent malfunction or inefficiency in ice production. 

Causes of failure can include stripping of the screw threads through over-tightening or corrosion, leading to a less secure fit.

Symptoms of a bad Screw include:

• Loose or dislodged components within the ice maker assembly.
• Inconsistent or halted ice production due to components shifting.
• Unusual noises emanating from the ice maker as a result of loose parts.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door Shelf is an OEM replacement part for Whirlpool refrigerators. It is responsible for providing additional storage space inside the refrigerator door. The shelf features an open design that allows smaller items like condiments and snacks to be easily accessed.  

Causes of a bad door shelf can include cracks or breaks in the plastic material over time, detached or damaged mounting brackets, as well as normal wear and tear.

Symptoms of a bad door shelf include:

• Sagging or inability to securely hold contents  
• Complete detachment from inside refrigerator door
• Cracks or holes that compromise the storage surface

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Endcap is an OEM part for Whirlpool refrigerators. It serves as a component for the interior shelving system, providing support and stability to the shelves that hold food and beverages.  

Causes of a bad endcap can include physical damage from overloading shelves, accidental breakage, or normal wear and tear over time. These scenarios can lead to the endcap becoming cracked, broken, or otherwise unable to properly support the shelf, potentially leading to the shelf collapsing or not being able to hold items securely.

Symptoms of a bad Endcap include:

• Shelves that sag or fail to stay level
• Difficulty in sliding shelves in or out
• Visible cracks or breaks in the endcap
• Loose or unstable shelves due to poor endcap support

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This is a refrigerator door compartment bin. It provides organized storage on the door for condiments, jars, and small items, helping keep frequently used items within easy reach and preventing spills.

• Holds items on the refrigerator door and helps prevent tipping or sliding
• Replaces a cracked, loose, or missing door bin
• Common symptoms include items falling from the door, poor organization, or a bin that won't stay seated

• Unplug the refrigerator and remove contents from the old bin before replacement
• Lift the old bin straight up to release from the side rails; align and press the new bin into place
• Do not overload the bin; ensure a secure fit on the door rails
• Handle plastic parts carefully to avoid cracking

The Door Shelf Bin is an OEM part for Whirlpool refrigerators, designed to offer convenient storage space on the inside of the refrigerator door. This bin attaches to the door, providing an accessible place to store condiments, bottles, and other small items, maximizing the available space within your refrigerator. 

Causes of damage to the door shelf bin often include overloading with heavy items, impact from items being moved in and out of the refrigerator, or degradation over time due to the accumulation of moisture and exposure to temperature fluctuations. 

Symptoms of a bad Door Shelf Bin include:

• Cracks or breaks in the plastic
• Discoloration or warping, which can be caused by exposure to extreme temperatures or cleaning chemicals.
• Difficulty fitting into its designated slot on the refrigerator door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This manifold is the dishwasher's internal water feed tube that channels wash water from the pump to the upper spray levels. Replace a cracked, clogged, or leaking manifold to restore proper spray pressure and consistent cleaning performance.

• Routes wash water from the pump to mid/upper spray arms for full-rack coverage
• Helps maintain water pressure and flow to the upper spray zones
• Common symptoms of a failed manifold: weak or no spray on the upper rack, poor cleaning results, or leaks from the rear feed area

• Disconnect power and water supply before servicing
• Open the door and remove rack(s) as needed to access the rear feed tube
• Release locking tabs/clips, remove the old manifold, and fully seat the new one until it locks in place
• Run a short cycle to check for leaks

Color: Grey

Color: Bisque

Color: Black

The Hinge-Sleeve Hole Plug is an OEM part for Whirlpool refrigerators. It is designed to cover the hinge sleeve holes on the refrigerator door, providing a finished look and protecting the internal components from dust and debris.

Common causes of a bad hinge-sleeve hole plug include physical damage during routine maintenance or accidental impacts. A missing or damaged plug can lead to exposure of internal hinge components, potentially causing further damage over time.

Symptoms of a bad hinge-sleeve hole plug include:

• Visible gaps or holes in the refrigerator door hinge area
• Accumulation of dust or debris in the hinge mechanism
• Loose or unstable refrigerator door hinges

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Biscuit

Color: White

Color: Black

Color: Stainless