Engine Gasket & Seal

This is an authentic oil pan gasket replacement that has been sourced from the manufacturer. It can be used with many types of lawn and garden machines. The gasket is used as a means to help seal the oil pan to the bottom of the engine block. This helps to ensure that there is no oil leakage when the oil moves back and forth from the pan to the engine. Oil leaks are a major sign of a problematic oil pan gasket. Although the gaskets are made from quality material, they will need to be replaced on occasion. Over time, the gaskets can start to stretch or wear thin. They may start to dry out or crack and break away. This would allow for oil leaks to start. Small leaks could start to degrade the gasket further. The gasket should be replaced whenever the owner is performing maintenance on the machine and changing out the oil and the oil filter. The genuine OEM oil pan gasket is sold individually. It can be used with more than 150 models of snowblowers, generators, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, and MTD.

This is a replacement crankcase gasket that can be used for a range of outdoor power equipment and small engines including lawn mowers. The crankcase gasket helps to provide a seal between the crankcase and the crankcase cover. It will help to ensure that there are no oil leaks, which could cause performance problems with the engine. The crankcase gasket should be checked on when owners do regular maintenance to their machines. The gaskets can start to have problems the longer they are used. They can start to dry out and crack, and they may even break. These kinds of issues could then cause an oil leak. This not only causes a mess, but it will waste oil. The replacement is relatively easy to perform. The crankcase gasket is made from durable material, and it is a genuine OEM part right from the manufacturer. It can be used with many types of small engines including those found on pressure washers and lawn mowers. Brands with compatible models include Tecumseh, Lawn-Boy, Toro, and Briggs & Stratton.

This replacement cylinder head gasket is a genuine part manufactured by Tecumseh for use in select lawn and garden engines. The cylinder head gasket is designed to fit between the cylinder head and the crankcase, sealing the flow of air and fuel through the engine and preventing oil from getting into the fuel. The gasket is exposed to high heat and constant pressure and will become brittle and worn over time. This could affect the seal and lead to bigger problems, so an immediate replacement is necessary. This OEM cylinder head gasket is manufactured to exact standards by Tecumseh and can be used in select models from the brand, as well as those from Toro and Lawn-Boy. The gasket fits certain models of pressure washers, lawnmowers, and chippers. It is sold as an individual unit and doesn't include any hardware or accessories. Replacing the cylinder head gasket should only be done when the engine is cool. Wear gloves and work in a well-ventilated space when doing this kind of work for safety. When replacing gaskets, always use care with the new part so that it doesn't get broken or damaged during installation.

This genuine OEM intake manifold gasket is found on lawnmowers, snowblowers, and other lawn and garden equipment. The intake manifold gasket protects the carburetor from debris and containments that would affect the engine performance. If the engine misfires, surges, won't start, or is running hot; the intake manifold gasket could be causing the problem. Normal wear and tear can cause the gasket to tear or have debris buildup and need to be replaced.The manifold intake gaskets need to be inspected and replaced on a regular basis even when there is not an engine issue. If the motor is misfiring or overheating, the intake manifold gasket is one place to check. Empty the fuel tank and make sure there is no fuel in the carburetor. Disconnect the spark plug and remove it from the engine. Make repairs in a well-ventilated area. Remove the old gasket and clean the area to ensure a tight fit when the new ones are installed. This manifold intake gasket is sourced directly from the manufacturer and sold as an individual part. It is compatible with lawnmowers, snowblowers, tillers, and pressure washers manufactured by Craftsman, Toro, and Tecumseh.

This authentic OEM replacement carburetor gasket is compatible with a variety of different lawn tractors and mowers. Like any gasket, this part acts as a seal to keep fuel and air inside the carburetor. This is incredibly important because the carburetor is responsible for maintaining a balance of oxygen and fuel. If either fuel or air escape from the carburetor, the engine will not create the right amount of combustion and will not start and run properly. Heat and pressure are the most common reasons why gaskets break down. As the engine heats up, this gasket absorbs that heat and becomes more malleable. Damaged carburetor gaskets can cause the carburetor to idle, vibrate, backfire, or stall out. Changing out a carburetor gasket requires gaining access to the interior of the carburetor. Whether or not this is a difficult job will depend on the appliance is that needs repairing. This high-quality replacement part will fit Tecumseh, MTD, and Toro appliances and is sourced from its original manufacturer. This replacement carburetor gasket does not ship with any additional hardware.

Cylinder head gaskets are part of internal combustion engines found in snow blowers and other lawn equipment, such as riding lawnmowers. They create a seal for the gas in the cylinder, and prevent coolant and oil from getting into the other cylinders. Even with regular use, cylinder head gaskets can fail. The result is a loose, worn, or damaged component that can no longer perform its job. Signs the cylinder head gasket has gone bad include leaks, overheating, and poor engine performance. A replacement part and repair are required to ensure the continued operations of the device.Replacing a cylinder head gasket requires protective gloves and the proper tools. The technique for replacing a damaged or worn cylinder head gasket will vary depending on the engine's location and the particular gasket that has to be exchanged.This cylinder head gasket is an authentic OEM replacement part. It is supplied by the manufacturer and sold individually. It is compatible with both Tecumseh and Toro snowblowers, lawnmowers, and various cycle horizontal engines. It is made of high-quality, durable material.

This is an intake manifold gasket used primarily in lawnmowers and wood chippers with small engines. The intake manifold gasket sits between the carburetor and the intake manifold. It offers an air-tight seal that ensures the carburetor runs at peak performance levels. The gasket is made from compound material and is durable, but through time and use, the part can wear and break down, which necessitates replacement.Some symptoms of a worn-out intake manifold gasket are engine misfiring, decrease engine power, leaks, and engine overheating. In some cases, the gasket will also break and need to be replaced before the lawn equipment is used. Installing a new intake gasket requires a wrench. Make sure the equipment is turned off and placed on a sturdy surface. Remove the spark plug wire before taking off the carburetor. Next, the manifold gasket can be removed before placing a new component and reassembling additional parts.This intake manifold gasket is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The gasket can be used with lawnmowers and wood chippers manufactured by Craftsman, Lawn-Boy, MTD, Tecumseh, and Toro.

This gasket set is a genuine OEM part sourced directly from the manufacturer. It is used in many different lawn and garden machine engines. These gaskets are used in the carburetor to prevent air and fuel from leaking out and reducing engine performance. Everyday use and the excessive heat of the engine can cause damage to the gaskets over time. This is evident by a sputtering engine or one that backfires. This is due to air or fuel infiltrating the combustion chamber through the carburetor. When this occurs, the gaskets will need to be replaced.Open the carburetor and remove the damaged gaskets. Clean the parts of the carburetor, receiving the new gaskets before installing them. If the areas are cleaned well, the new gaskets will not require lubrication. After seating the gaskets, ensure the fit is tight and that there is no buildup of debris or dust that could interfere with a complete seal. If the gasket appears off level, check for dust or tiny particles underneath it; remove it and clean the area before sealing the part. Reinstall the carburetor cover. Start the engine with the pull rope and check for sputtering or backfiring; there should be none. This gasket kit is sold as an individual kit. It is compatible with small engines manufactured by Tecumseh, Toro, and Craftsman.