Parts for Ge PFSS9SKYBSS: 02 - Fresh Food Doors Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This left-side refrigerator door foam assembly restores insulation inside the door to help maintain proper cooling and reduce drafts. It replaces damaged or deteriorated foam that can let cold escape and allow moisture or frost to form. What it does:

• Replaces the internal foam insulation in the left refrigerator door to improve thermal sealing
• Helps reduce cold loss and maintain more consistent cooling inside the cabinet
• Can minimize frost or condensation buildup around the door area caused by degraded insulation
• Restores proper fit between the door liner and outer shell where foam has cracked or crumbled

• Disconnect power to the appliance before beginning any repair
• Remove door trim and liner per OEM instructions to access the foam assembly
• Handle carefully to avoid tearing the foam or damaging the door liner; use appropriate trim tools

The French Door Spring Pin is an OEM part for GE refrigerators. It plays a crucial role in the proper functioning of the refrigerator's French doors by ensuring they close securely and smoothly. This spring pin helps maintain the alignment and tension of the doors, contributing to the overall efficiency and usability of the appliance.

You should replace this French door spring pin if it becomes damaged or fails. Causes of a bad spring pin can include wear and tear over time, accidental damage, or corrosion due to exposure to moisture.

Symptoms of a bad French door spring pin include:

• Difficulty in closing the refrigerator doors
• Doors not staying securely closed
• Misalignment of the French doors
• Unusual noises when opening or closing the doors

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a French spring, or French divider door spring. It is used in refrigerators. This part allows the doors to open and close. It is located in the door of the fridge. A new French divider door spring may be needed if the door is stuck or is coming off of its hinges. This repair requires only a standard household toolkit. To replace the spring simply remove the old one and replace the part with a new, working piece. Be sure not to bend the spring while installing it as it will not fit in as the replacement part. This is a genuine OEM part. It is sourced directly from the manufacturer and is sold individually. This specific French Divider Door Spring is compatible with appliances made from General Electric.

This ice chute cap gasket seals the ice chute cap to help keep ice contained and reduce air or moisture intrusion in the dispenser area. It restores a tight, flexible seal for proper ice dispensing and storage. What it does:

• Seals around the ice chute cap to help prevent ice spills and migration
• Limits warm air and moisture from entering the ice compartment
• Helps reduce ice clumping and sticking by maintaining a stable chute seal
• Restores proper fit where a worn or torn gasket allows gaps

• Disconnect power to the appliance before inspecting or replacing the gasket
• Remove the chute cap carefully, clean mating surfaces, and press new gasket fully into place for an even seal
• Inspect surrounding trim for damage and handle the gasket gently to avoid tears
• If adhesive or fasteners are present on your model, use only OEM-recommended methods

This is a dispenser cover for refrigerators. It is stainless steel in color. The purpose of this part is to control the dispenser functions. It has buttons for turning on the energy saver mode, adjusting the freezer, an alarm, controlling the ice and water dispenser, and locking the dispenser. It also has a digital display.Over time and with use, the text on the dispenser cover may wear off. If this is the case, this part will replace it so that the user can see the text again. This part can also be replaced for cosmetic reasons such as if the stainless steel finish is scratched or damaged. Unplug the refrigerator before replacing this part.This dispenser cover is sold individually and is sourced straight from the manufacturer. This part is compatible with refrigerator units that are manufactured by the General Electric brand.

This is an ice chute and funnel assembly for refrigerators with ice dispensers on their doors. The chute opens upon the user's command input and releases ice into a glass or other container placed underneath it. With use, because of misuse, or as a result of accidental damage, part or all of the ice chute door and funnel may malfunction or fail entirely. When this happens, a replacement part is required to continue using the ice dispensing feature.If the ice chute no longer dispenses ice, or if it is dispensing too much or too little ice, it's a good indication that there is something wrong with this part of the appliance. It's a quick repair. It is always recommended to unplug the device before beginning the replacement. Move any food that could spoil while the repair is being completed.This refrigerator ice dispenser ice chute door and funnel assembly is a genuine OEM replacement part. It is sourced directly from the manufacturer. It is sold as an individual unit and made of durable materials. The replacement part is compatible with several models of refrigerators manufactured by General Electric, Hotpoint, and RCA.

A self-tapping screw used to fasten appliance panels and components where a threaded hole is formed as the screw is driven. Provides a secure hold for trim, brackets, and light assemblies during repairs. What it does:

• Cuts its own mating thread in sheet metal or thin plastic to secure panels and brackets
• Helps hold trim, access panels, or internal components in place
• Commonly used where a tapped hole is not present or repair requires a replacement fastener
• Can prevent loose parts and rattles caused by missing or damaged screws

• Unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correct screwdriver or bit to avoid stripping the screw head
• Start the screw straight and apply steady pressure; do not overtighten to avoid cracking plastic or stripping metal
• Replace only with the exact part number to ensure proper fit and function