General Electric Touch Pad

The Main Control Board  is an OEM part for GE refrigerators. This main control board serves as the central control hub for your refrigerator, responsible for regulating various functions such as temperature control, defrost cycles, and overall operation.

A bad main control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as erratic temperature readings, unresponsive controls, or complete refrigerator malfunction, it may be time to replace the main control board.

Symptoms of a bad main control board include:

• Erratic temperature readings
• Unresponsive controls
• Complete refrigerator malfunction

Restore proper function to your GE refrigerator by replacing the faulty main control board with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This replacement control panel and mounting bracket assembly restores a secure, like-new stainless front to the appliance's control area, providing proper support for the user interface components and a clean, factory appearance after dents, cracks, or corrosion. What it does:

• Provides the structural fascia and support for the control area
• Restores proper alignment for buttons/knobs and display openings
• Replaces dented, cracked, or bent panel/bracket components
• Helps eliminate flexing or wobble when using the controls

• One stainless steel control panel and mounting bracket assembly

• Disconnect power at the breaker before servicing
• Wear cut-resistant gloves; sheet metal edges can be sharp
• Transfer existing control components and hardware from the old assembly to the new one
• Photograph fastener locations and wiring before removal; align panel before final tightening

This control panel overlay replaces the printed graphic that identifies the keys on your appliance's control panel. Swap a worn or peeling overlay to restore clear, readable settings and a clean, factory look.

• Provides the printed labels and icons for the control panel buttons
• Maintains a clean, finished appearance on the front of the appliance
• Typical replacement when the original overlay is worn, cracked, bubbling, discolored, or unreadable
• Helps ensure correct button identification after cleaning chemicals or heat have damaged markings

• Disconnect power before servicing and removing the control panel
• Remove the control panel face, then carefully peel off the old overlay; clean the surface of any residue
• Align the new overlay using the window cutouts/markings and apply smoothly to avoid wrinkles or trapped air
• Reassemble the control panel and restore power; button labels align correctly

This control panel assembly replaces the front user-interface panel, restoring a secure, clearly labeled surface for operating your appliance. Install a new panel when the original is cracked, loose, or the control markings have become worn or unreadable. What it does:

• Provides the user-facing interface area for selecting functions and settings
• Houses and aligns buttons/switches and other control components
• Shields the control area from heat, spills, and impact
• Common symptoms: cracked or warped panel, worn/peeling graphics, loose or broken mounting points, sticky or misaligned buttons

• 1 control panel assembly

• Disconnect power at the breaker before servicing.
• Remove knobs/trim and the screws securing the existing panel; carefully lift it away.
• Transfer any reusable parts from the old panel to the new panel.
• Reinstall fasteners and trim, restore power, and test all controls.

This part is a replacement control panel assembly. This part can be used to replace a broken or defective control panel in a variety of oven models. The control panel ensures the user can properly and safely adjust and maintain the oven temperature and settings. The appliance may not work properly, if at all, if this part is broken in any way. Thus, it will need to be immediately replaced. Always disconnect power from the appliance before starting any work or repairs. It is recommended that work gloves are worn to protect the hands.This is a genuine OEM part made by GE and has been sourced directly from the manufacturer. As an authentic replacement part, this control panel assembly is suitable for use on ovens that have been manufactured by General Electric, Hotpoint, and some other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This control panel assembly restores the microwave's user interface—the area you press to select cook options and view the display. Replace a cracked, loose, or unresponsive panel to bring normal controls and appearance back.

• Forms the front user-interface area for selecting functions and viewing time/status
• Provides the fascia and mounting structure for the control components behind the panel
• Helps resolve non-responsive keys, stuck buttons, or damaged/broken panel trim
• Restores proper alignment and a finished look of the control area

• Disconnect power at the breaker before servicing; microwaves contain high-voltage components
• Remove mounting screws, lift off the panel, and label/disconnect wiring harnesses
• Transfer any reusable components (control board, display, brackets/clips) from the old panel as required by your model
• Reinstall, secure fasteners, restore power, and test all keypad functions.

This drive PWB supplies and regulates power to a driven component in your appliance, ensuring the motor receives the correct signals for smooth, reliable operation and restoring function when the original board fails.

• Provides regulated power and control signals to a motor or actuator
• Interfaces with the main control to manage operation
• On-board components help protect the circuit from faults
• Common symptoms of a failing board: motor won't run or is intermittent, only one speed works, erratic surging, or visible burn marks/clicking from the board area

• Disconnect power before servicing; verify no voltage is present
• Handle the board by the edges and avoid static discharge
• Photograph/document all connectors; transfer them one at a time
• Reinstall using original hardware; keep wiring clear of moving parts

This control panel assembly replaces the front user interface on compatible ranges, providing a stainless-steel surface and mounting for the keypad and display so oven controls function and look complete again. What it does:

• Replaces the appliance's front control surface and secures the keypad and display.
• Restores usable buttons and clear markings when the original panel is cracked, dented, or worn.
• Helps address unresponsive or intermittent button operation caused by a damaged or loose panel.
• Provides a finished stainless-steel appearance and proper mounting for internal control components.

• Disconnect power at the breaker before beginning work; verify the appliance is de-energized.
• Handle the panel and finish carefully to avoid scratches; use proper fasteners and gaskets as shown in the service diagram.
• Removal may require accessing internal panels or removing the oven door—follow the OEM service instructions.

A black collar kit that replaces worn or damaged trim around the appliance opening, restoring fit and finish while helping maintain a secure seal between connected components. What it does:

• Replaces cracked, chipped, or faded collar/trim to improve appearance and restore proper alignment.
• Helps reduce gaps or drafts at the appliance opening caused by broken or warped trim.
• Prevents rubbing or interference between adjacent parts where the collar provides a finished edge.
• Useful when original collar is bent, loose, or no longer holds in mounting clips.

• Always disconnect power (and water, if applicable) before servicing the appliance.
• Basic hand tools such as a screwdriver or nut driver are typically required; follow the OEM diagram for correct orientation.
• Inspect mounting clips and surrounding seals; replace any damaged hardware or gaskets as needed.

Color: White

This keypad is the user control pad that lets you select cycles and settings on the appliance, restoring responsive button control and reliable input to the front console. It's a direct-fit replacement when buttons are unresponsive or intermittent. What it does:

• Replaces the front control pad so button presses register correctly
• Restores normal cycle selection and option entry on the console
• Commonly used when buttons are sticky, unresponsive, or work intermittently
• Helps eliminate erratic or missed inputs from a worn or damaged pad

• Disconnect power to the appliance before servicing to avoid shock risk
• Access may require removing the console or control panel
• Handle the keypad and flat flex cable carefully to avoid damage

This replacement backsplash assembly restores the finished rear panel on compatible ranges, protecting the wall behind the cooktop and returning the appliance's original appearance. Use it when the original panel is bent, rusted or cosmetically damaged. What it does

• Covers and protects the rear area of the cooktop from heat, grease and splatter
• Restores the appliance's finished look after dents, scratches or corrosion
• Provides the mounting surface for rear-mounted controls and components
• Prevents drafts and gaps behind the range that can collect debris

• Disconnect power to the range before beginning any service to avoid shock
• Typical installation requires removing a few screws and lifting the old panel out; basic hand tools are usually sufficient
• Take care with sharp edges and painted surfaces to avoid cuts or damage

This control panel assembly replaces the front user console on compatible GE ranges and ovens, restoring reliable button and display control for oven functions and temperature settings. It helps bring back normal operation when the console is unresponsive or buttons fail. What it does:

• Houses the user interface for oven controls, including key switches and display area
• Allows selection of bake, broil, timer and other cooking functions
• Restores responsive keypad/buttons and proper command signals to the range control
• Commonly used when buttons are unresponsive, display is dim/blank, or controls act intermittently

• One control panel assembly (console) as shown

• Disconnect power at the breaker before starting; risk of electrical shock if power remains connected
• Basic disassembly of the oven/range front bezel is usually required; handle the display and ribbon cables with care

This control panel assembly replaces the oven console user interface so you can restore the range's buttons, display and touch controls for normal cooking operation. It fits into the front console and provides the main input/display surface for oven functions. What it does:

• Houses the push buttons/touch controls and display used to set bake, broil, timers and clock
• Restores responsive control if buttons are cracked, stuck, or the display is obscured
• Provides mounting and electrical connection for the console electronics
• Helps clear user-interface related errors when the physical panel or buttons are damaged

• One control panel assembly

• Disconnect power at the breaker or unplug the appliance before starting.
• Handle the panel and display area carefully to avoid cracking glass or scratching surfaces.
• Keep all mounting hardware; electrical connectors are fully seated during reassembly.
• Test functions after reconnecting power before completing reassembly.

This keypad assembly is the user-facing control panel that lets you select cycles and options on your washer. Replaces a worn or unresponsive keypad to restore reliable button response and control readability. What it does:

• Provides tactile button input for cycle selection, start/pause, and option functions
• Restores control responsiveness when buttons are sticky, cracked, or unresponsive
• Maintains the front console finish and label legends for clear visibility
• Interfaces with the washer's control board to send user commands

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access typically requires removing the top or front console cover; keep track of screws and clips
• Handle the ribbon cable and connector carefully to avoid damage; align and seat fully on reinstallation

This backsplash assembly replaces a damaged or worn rear backguard on ranges and cooktops, restoring a clean appearance and covering the appliance's rear controls and wiring for safe, reliable operation. What it does:

• Covers and protects the range's rear control area and internal wiring from spills, heat, and debris
• Restores a finished look when the original backguard is dented, scratched, bent, or missing
• Provides mounting surface for controls and trim components when applicable
• Helps maintain proper airflow and safety clearances around rear components

• Disconnect power to the appliance before starting any repair
• Removal of control panel or trim may be required; follow OEM instructions
• Handle carefully to avoid scratching finished surfaces; two people may be helpful for alignment