Parts for Lg LWC3063BD/00: Lower Cavity Parts

Binding head screw that fastens microwave panels and components. Replaces missing, stripped, or damaged screws to restore secure assembly and eliminate rattling.

Replacement mounting screw for microwave panels and components. Secures loose or rattling parts when original screws are stripped, missing, or damaged.

Flat washer for microwave fastening hardware. Distributes load and prevents surface damage. Replace if worn, missing, or cracked to maintain secure connections.

Secures the storage drawer to your range frame. Replace this nut if it's stripped, cracked, or missing and the drawer won't stay properly attached.

Replacement mounting screw for microwaves and wall ovens. Secures internal components and panels. Order a new screw if yours is stripped, missing, or lost.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Replacement washer that secures fasteners and distributes load at connection points in ranges and ovens. Needed when original is missing, worn, or damaged.

Customized screw secures panels, brackets, and small assemblies in ranges and ovens. Replace when original specialized fastener is missing or damaged.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Secures the fan blade to the motor shaft in ranges and ovens. Replace if loosened from vibration, stripped threads, or missing to restore proper mounting.

Replacement mounting nut for cooktops and ranges. Secures components during installation. Order a new nut if yours is stripped, missing, or damaged.

Fixes refrigerator not powering on or functions not working. This main control board manages all refrigerator operations. Requires rear panel removal.

Fix a range that won't heat, cycle on, or respond to buttons. This control board assembly interprets inputs and restores reliable oven operation.

Restores thermal protection when oven runs too hot or surrounding cabinets feel warm. Replaces damaged insulation panel. Basic installation, 30 minutes.

Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.

Front cover assembly for wall oven microwave combo units. Replaces cracked, damaged, or worn exterior panel. Restores appearance and structure.

Replace a damaged or missing inner cover panel that exposes internal wiring or components. This panel restores interior appearance and protection. Moderate DIY.

Inner cover panel for wall ovens. Replaces cracked, damaged, or missing interior covers. Installs inside the oven cavity to restore appearance and protect.

Structural support component that installs inside your wall oven cavity. Replace this supporter if it's bent, cracked, broken, or missing to restore stability.

Mounting bracket for wall ovens. Secures oven to cabinet cutout. Replace if bracket is bent, cracked, or missing to ensure safe oven installation.

Fix a wall oven that won't heat, won't start, or displays error codes with this main control board. Manages heating, timing, and all oven functions.

Fixes oven not heating, display issues, or erratic operation. This control board restores power distribution and core functions. Moderate DIY repair.

Wire harness for ranges and wall ovens. Connects electrical components within the appliance. Replace if wires are damaged, frayed, or connectors are broken.

Shields the waveguide from grease and food splatter to prevent arcing and maintain heating performance. Replace when damaged, stained, or burned. Verify fit by part number for your microwave model.

This flat case is the outer cover that protects and secures internal components, helping restore a clean, finished appearance and prevent debris or accidental contact. It's a direct replacement for the original flat housing piece. What it does:

• Replaces worn, cracked, or missing outer housing to restore proper enclosure
• Keeps wiring and components protected from dust and impact
• Helps reduce rattling or vibration caused by loose or damaged panels
• Restores alignment so adjacent panels and controls fit correctly

• One flat case outer cover

• Disconnect power before beginning any repair to avoid shock or injury
• Remove retaining screws or clips from the existing case and retain hardware if reusing
• Align the replacement case carefully, then secure with original fasteners
• If mounting requires additional parts or hardware, verify those separately; no extra hardware is assumed included

Replace your cracked, broken, or missing microwave glass turntable tray. Tempered glass design rotates to provide even heating during cooking.

Microwave light bulb holder assembly secures and powers your interior bulb. Replace if bulb won't light, holder is cracked, or connections are loose. Verify fit by model number before ordering.

Circular lug that connects stripped wires to threaded terminals in microwaves. Replace if cracked, corroded, or missing to restore secure connections.

Fix uneven heating or wobbling rotation. This microwave turntable assembly includes the glass tray and roller guide for stable, smooth spinning.

Turntable stopped rotating or making grinding noise? This synchronous motor restores smooth tray rotation for even heating. Simple DIY fix with a screwdriver.

Fix a microwave turntable that won't spin or wobbles during heating. This replacement shaft restores smooth glass tray rotation for even cooking.

Oven not heating or cooking unevenly? This heating element generates the heat needed to cook food. Common fix for temperature issues in electric ovens.

If your microwave has poor heating or uneven cooking, the circulating fan motor may have failed. This motor drives airflow for proper temperature distribution.

Mounting bracket secures your wall oven to the cabinet cutout. Replace if bracket is bent, cracked, or missing to ensure proper installation support.

This replacement reflector restores proper light/heat direction and helps protect the internal lamp area from damage. It installs in the appliance's interior to improve illumination and component coverage. What it does:

• Directs light or heat toward the intended area for consistent performance
• Protects the lamp/sensor area from direct contact and debris
• Replaces cracked, warped or missing reflectors that cause uneven lighting
• Helps eliminate rattling or loose-fit issues when the original reflector is damaged

• Disconnect power before starting any repair to avoid shock or injury
• Handle the reflector carefully to avoid scratches or bending that reduce effectiveness
• Use the same mounting hardware and fasteners removed during disassembly; do not overtighten

Metal drip tray installs inside your wall oven to support cookware and catch spills. Replace if cracked, warped, rusted, or missing for a clean cavity.

Halogen bulb that illuminates the cavity or cooktop below your microwave. Replace when dim, flickering, or burned out. Confirm fit with model number.

Wall oven stopped moving or cycling intermittently? This AC synchronous motor assembly restores precise rotation and timing. Moderate DIY repair.

Oven not heating properly or taking too long to reach temperature? This halogen heating element restores concentrated heat for normal baking and roasting.

This rear cover is the factory-style cabinet rear panel that protects internal components and helps maintain appliance structure. It restores the appliance's enclosure and keeps wiring and parts shielded for safe operation. What it does:

• Covers and protects internal components from dust, debris and accidental contact
• Helps reduce noise by enclosing moving parts and support structure
• Provides mounting surface for internal parts and routing for wiring
• Prevents exposure that can lead to sparks, shorting, or further component damage
• Common symptom: missing, cracked or loose rear cover, rattling or exposed components

• Disconnect power (unplug or switch off breaker) before starting any repair
• Use correct screws and fasteners; do not force or bend the panel into place
• Wear gloves to avoid cuts from sharp sheet-metal edges and check for pinched wiring after reassembly

Replace a faulty miraclon heater causing uneven heating or no heat in your microwave. This heating element ensures proper cooking performance.

Replacement oven rack that slides into side supports for level cooking space. Needed when your current rack is warped, bent, or damaged from heavy use.

This replacement part is a slide rack that has been manufactured by LG and is compatible with wall ovens. The slide rack is an internal component of the oven that provides a stable, heat-safe surface on which to balance cookware and place food inside the oven. Over time, this part could become bent, dented, warped, corroded, lost, or broken, requiring replacement. No tools are required to replace this part. Simply slide out the old rack and slide the new one into place. Ensure that oven is completely cooled down before attempting this to prevent serious burn injuries. This is a genuine OEM part that has been sourced directly from the manufacturer. This is an authentic part made of high-quality, durable, non-corrosive metal and is compatible with different wall ovens manufactured by LG and other brands. This part is only sold individually.

Fix no water dispensing or leaking inside your wall oven combo with this water reservoir tank assembly. Restores proper water flow to dispenser systems.

Fix water leaks or no water flow to your dispenser with this water housing assembly. Routes water from supply line to icemaker and dispenser. DIY repair.

Catches drips, crumbs and grease during cooking to protect your oven floor and simplify cleanup. Replace if warped, rusted or missing. Confirm fit with your model.

Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.

Microwave won't start or runs with door open? This interlock door switch is a common fix. DIY repair in under 30 minutes with a torx bit.

If your microwave door won't latch or close securely, this holder assembly locks the door mechanism in place. Moderate difficulty repair in 30-45 minutes.

Microwave won't start or runs with door open? Failed door switch prevents safe operation. Simple DIY fix with basic tools in under 30 minutes.

Microwave won't heat? A failing high-voltage capacitor disrupts the heating circuit. This part stores electrical energy for consistent operation.

Microwave not heating food? This high-voltage transformer powers the magnetron to heat properly. Fixes no-heat issues in microwave ovens. DIY repair.

If your microwave isn't heating food, the magnetron may have failed. This high-voltage tube generates microwaves for cooking. Moderate difficulty repair.

Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.

Microwave not heating or overheating? This thermostat regulates internal temperature by controlling the cooling circuit to maintain safe operating levels.

Microwave won't heat or makes loud buzzing noise? The diode regulates magnetron current flow. Simple repair—test with multimeter for continuity.

Fix F9 error code or oven not heating issues. This thermal safety thermostat monitors temperature to prevent overheating. DIY repair in 15-60 minutes.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.

Mounting bracket for microwaves. Secures the unit to cabinetry or wall. Replace if bent, cracked, or missing to ensure proper installation support.

Replace a broken or damaged motor bracket causing loose or misaligned oven fan motor. Straightforward repair that restores proper motor mounting and support.

Fix inaccurate oven temperatures with this range temperature sensor. Restores proper heating cycles when your oven runs too hot or cold.

Fix range control panel display issues or power failures with this DC power jack. Restores electrical connection to control board. Moderate DIY repair.

Microwave not heating or overheating? A faulty thermostat fails to regulate temperature properly. This part restores consistent heating performance.

Oven not cooling properly or overheating? This fan assembly restores airflow and temperature control. Includes motor and blade for complete repair.

This reflector assembly restores proper reflection inside the appliance, helping redirect light/airflow as intended for consistent performance. Replace a cracked, dented, or missing reflector to reduce glare, rattling, or uneven operation. What it does

• Directs reflected light and airflow within the appliance to maintain designed performance.
• Helps prevent hot/cold spots or uneven airflow caused by a damaged reflector.
• Stops loose or broken reflector pieces from rattling during operation.
• Restores proper fit and alignment when the original reflector is bent, cracked, or missing.

• Disconnect power (unplug or switch off circuit breaker) before starting any repair.
• Handle carefully; edges may be sharp—wear gloves and eye protection.
• Remove panels and fasteners as shown; retain original screws for reinstall.

This AC fan motor powers the appliance's cooling fan to move air across coils for proper heat exchange and temperature control. Designed as a direct replacement to restore normal airflow and cooling performance. What it does:

• Spins the cabinet/condensing/evaporator fan to circulate air for heat exchange
• Restores airflow if fan is noisy, intermittent, or not running
• Helps prevent overheating by maintaining proper condenser/evaporator ventilation
• Reduces cycling issues caused by poor air movement

• Disconnect power before servicing to avoid shock or injury
• Handle the motor and fan blades carefully to prevent damage to wiring and connectors
• Verify mounting orientation and connector fit before securing the motor

Fix loose or misaligned range components with this retaining ring. Secures parts in place to prevent excess movement and wear. Simple installation.

If your oven won't heat evenly or runs too hot, this convection fan motor restores proper airflow and temperature control. Direct-fit replacement.

Microwave not cooling properly or making unusual noise? This fan blade circulates air for heat dissipation and even cooking. DIY-friendly repair.

Fixes loud vibration or grinding noise from oven vent fan. This blower motor housing realigns the cooling fan motor and wheel to restore proper airflow.

Idle bracket for wall ovens. Mounts internally to support and secure components in place. Replace if bracket is bent, broken, or missing during repair work.

Fixes power connection issues or arcing at the terminal block. This socket connects your range power cord to internal wiring. Moderate DIY repair.

Door hinge bracket for wall ovens. Secures and supports the door hinge mechanism. Replace if bracket is cracked, bent, or broken causing door misalignment.

Oven not heating or baking unevenly? A failed bake element is the most common cause. This part provides the primary heat source for baking and roasting.

If your wall oven isn't heating properly or has exposed wiring near the element, this heating element shield protects components from direct heat damage.

Replace your worn range oven door gasket to restore proper heat sealing and improve cooking efficiency. Verify fit with your model number before ordering.

Packing gasket creates a secure seal to prevent leaks and air loss in your oven. Replace if worn, cracked, or damaged to restore proper function. Verify fit.

Replace your wall oven's vent assembly if it's cracked, damaged, or missing. This assembly installs at the top or rear to ensure proper ventilation.

Fix poor ventilation or overheating in your wall oven with this air outlet vent. Restores proper airflow and exhaust function. DIY-friendly repair.

This replacement mounting bracket secures internal components and panels on compatible LG appliances, restoring proper alignment and support. It's a direct-fit structural part designed to stop rattling and keep assemblies stable during normal use. What it does

• Provides a secure mounting point for internal panels, modules, or assemblies
• Prevents rattling, vibration noise, or misalignment caused by loose fittings
• Restores proper support for components that have come loose or shifted
• Helps maintain safe, stable operation by keeping parts properly positioned

• One mounting bracket

• Disconnect power to the appliance before beginning any repair
• Installation typically requires basic hand tools (screwdriver, wrench) and removal of access panels
• Keep track of screws and orientation; test fit before final tightening
• If sharp edges are present, wear gloves and eye protection

This plate guide is the rotating support that centers and stabilizes the microwave's glass tray for smooth, even rotation during cooking. It restores proper turntable movement and helps prevent wobbling or scraping. What it does:

• Supports and centers the glass turntable so it rotates evenly
• Keeps the tray aligned with the drive coupling to prevent slipping
• Reduces wobble and noise caused by a worn or broken guide
• Can resolve symptoms like an off-center, wobbly, noisy, or non-rotating turntable

• One plate guide

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove the glass tray and roller ring to access and replace the guide
• Handle glass parts carefully to avoid chips or cuts; reinstall components in proper order
• No special tools typically required; test rotation after reassembly