Need Help?
Call or text
Show parts
Air duct to front panel seal for washer dryer combos. Replaces worn, cracked, or missing seals that compromise airflow between the duct and panel.
Usually ships within 4 - 14 days
8-18 x 0.500 mounting screw for appliances. Secures panels, brackets, and components. Replace if stripped, missing, or damaged during repairs.
Secures wiring harness to prevent chafing and maintain safe wire routing in washers, dryers, and laundry appliances. Replace if loose or broken. Check your model for compatibility.
Replacement air duct for laundry center dryer section. Directs heated air from element to drum. Order if your duct is cracked, damaged, or missing.
Seals the blower housing to prevent air leaks and maintain efficient airflow. Replace if torn, damaged, or causing reduced drying performance.
PPH ab st/z/ch `6 - 18x.60
This part is discontinued by the manufacturer and is no longer available for purchase.
Encloses the blower wheel and channels air through your washer dryer combo's coils. Replace if cracked, warped, or melted to restore airflow and stop noise.
Fix a dryer making grinding, rumbling, or knocking noises after stopping. Blower wheel wears from heat causing cracks and loose clamps. Front access repair.
Replacement fastening screw that secures panels, trim, or internal components in your washer. Needed when original is stripped, missing, or damaged.
Fix a washer dryer combo that won't heat or overheats with this control thermostat. Regulates temperature during drying cycles. Basic DIY repair.
Metal sheet-metal screw secures panels, brackets, and internal components. Replace when missing, stripped, or damaged to restore proper fit.
Secures the drum baffle (lifter vane) to your washer drum. Replace missing, stripped, or loose screws to keep baffles firmly attached and prevent rattling.
Replaces missing, stripped, or rusted 8-18 thread screws that secure dryer panels, brackets, and components for tight, rattle-free assembly.
Maintains tension on the dryer idler arm and drive belt. Replace if spring is stretched, broken, or missing to restore proper belt tension and drum rotation.
Dryer drum won't turn or making loud banging noises? A broken drum belt is the likely cause. This belt connects the motor to the drum for rotation.
Secure dryer hose clamp prevents air leaks and improves venting efficiency. Replace if loose, damaged, or during hose maintenance. Confirm fit with model.
Hex washer head screw for washers and laundry centers. Replaces missing, stripped, or damaged screws during repairs or component replacement.
Pan head mounting screw for dryers. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.
External mounting bracket for laundry center units. Secures and supports the appliance frame. Replace if bent, cracked, or missing for proper installation.
Secures the blower wheel to the motor shaft in your dryer. Replace if worn, loose, or causing rattling noises to restore proper airflow. Verify fit by model.
Door sagging or panels loose? This #8-32 x 3/8 pan head locking screw secures top brackets and hinges. Quick 5-minute fix with basic screwdriver.
Smell gas when your dryer is off? This gas shut-off valve stops leaks from the burner assembly. Common fix for gas odor issues in dryers.
Brass male connector union for dryer installations. Replaces cracked, corroded, or missing connector fittings. Ensures secure connections.
Secures water line tubing to valve or fitting connections on dryers. Replace if nut is stripped, cross-threaded, corroded, or missing for proper seal.
Gas smell during or after cycles? Dryer won't heat? Replace the gas valve assembly to restore proper gas flow and safe operation. Advanced repair.
Dryer won't heat or stops heating after 10-15 minutes? Gas valve coils control burner ignition. Simple 5-10 minute repair with video guide included.
Gas conversion orifice for dryers. Converts natural gas units to LP/propane fuel type. Replace if orifice is lost, damaged, or switching fuel sources.
Burner orifice that meters gas flow to your dryer's burner. Replace if clogged, damaged, or wrong size for fuel type during LP/natural gas conversion.
Fix a dryer that won't heat or spins without igniting. This igniter assembly lights the gas burner to start drying cycles. Common DIY repair, 30-45 minutes.
Replacement mounting screw for washers. Secures internal components and panels. Order if original hardware is stripped, missing, or damaged.
Dryer not heating or flame goes out after igniting? This flame sensor monitors burner temperature to regulate gas flow. Easy 15-minute DIY repair.
Converts compatible gas dryers from natural gas to propane. Includes orifices and components for safe LP operation. Order if switching fuel types.