Parts for Lg LMHM2237BD/01: Other Parts

The TEMPLATE is an OEM part for LG microwaves. It is the outer casing and control panel covering that defines the microwave's design and aesthetics.  

The causes of a bad template can include cracks, dents, or damage to the outer surface from impacts or normal wear over time. Heat and humidity fluctuations can also cause template materials to degrade.

Symptoms of a bad template include:

• Cracks or breaks in the template material
• Loose, misaligned, or damaged control panel or display  
• Yellowing, warping, or discoloration of plastics
• Openings or gaps that compromise the microwave structure

This genuine OEM LG replacement part restores the microwave's appearance and protects internal components. It is also compatible with some Kenmore and Sears microwaves
 

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

This replacement screw secures specified panels or components inside your appliance. Refreshing worn or missing hardware helps restore a tight fit, reduce rattling, and keep assemblies properly aligned for reliable performance.

• Provides secure fastening for brackets, panels, or internal assemblies
• Replaces stripped, rusted, or lost hardware
• Helps reduce vibration and rattling noises
• Symptoms include loose panels, shifting components, or a screw that won't tighten

• Disconnect power and allow any hot surfaces to cool before servicing
• Wear cut-resistant gloves and eye protection
• Match length and thread to the original; replace like-for-like
• Start threads by hand to avoid cross-threading; do not overtighten

This customized screw fastens specific panels, brackets, or internal components in LG appliances. Replacing a missing or stripped fastener restores a secure fit and helps reduce vibration, rattling, and premature wear. What it does:

• Secures mating parts such as panels, brackets, or mounts per the appliance design
• Restores proper fit when the original screw is lost, damaged, or stripped
• Helps reduce vibration and rattling from loose components
• Maintains alignment to support correct operation of the assembly

• Includes: One screw

• Disconnect power and, if applicable, shut off water and gas supplies before servicing
• Match length and thread to the original; start by hand to avoid cross-threading
• Use the correct driver size and tighten snugly without over-torquing
• Inspect and replace any damaged clips, inserts, or mating threads before reassembly

This customized nut is a small fastener used to secure components inside an appliance. Replacing a stripped, rusted, or missing nut restores a tight hold, reduces vibration, and helps keep panels and brackets properly aligned.

• Threads onto a matching screw or bolt to clamp parts together
• Maintains alignment of panels, brackets, and internal assemblies
• Helps prevent vibration, looseness, and rattling during operation
• Common failure signs: missing hardware, stripped threads, or components that won't stay tight

• Disconnect power; turn off water or gas before servicing
• Match the thread size/pitch to the original fastener before installation
• Hand-start threads to avoid cross-threading; tighten until snug—do not overtighten
• Replace any worn companion hardware (screw/bolt/washer) as needed

This auxiliary burner holder mounts on your gas cooktop or range and supports the smaller auxiliary/simmer burner. It properly positions the flame ports and igniter for reliable lighting and an even, stable flame.

• Supports and locates the auxiliary burner over the gas orifice
• Aligns with the igniter for quick, consistent ignition
• Helps maintain even flame distribution and low-heat control
• Common signs of failure: burner won't light or lights intermittently; uneven/yellow flames; burner cap won't sit level or wobbles

• Turn off gas supply and disconnect power; allow the appliance to cool completely.
• Remove grate, burner cap, and burner head from the affected position.
• Note the holder's orientation; detach the old holder and clean the mounting surface.
• Align the new holder with the gas orifice and igniter, secure with the original screws, reassemble, and test burner operation.

This part mounts on the cooktop and supports the small "auxiliary" burner assembly. It channels gas from the orifice to the burner head so the simmer burner lights reliably and produces a steady, even flame.

• Secures and centers the auxiliary burner head/cap on the cooktop
• Directs gas flow from the orifice to the burner head for proper combustion
• Helps position the igniter adjacent to the burner head for reliable lighting
• Common symptoms include hard-to-light or non-igniting small burner, uneven/weak flame, or a burner head that won't sit level due to a damaged base

• Shut off gas supply and disconnect power; allow the surface to cool completely
• Remove grates, burner caps, and burner heads to access the base; remove mounting hardware
• Transfer existing components (such as the orifice holder and igniter) to the new base
• Reassemble, restore gas, and check all connections for leaks before use

This door frame assembly replaces a damaged or warped outer door frame to restore proper fit and finish. It re-establishes a stable support for the door and helps the appliance close and seal correctly. What it does

• Provides the structural outer frame that supports the door and inner components.
• Restores correct door alignment and reduces gaps that can cause rattling or poor closure.
• Helps prevent debris and moisture from entering the door cavity.
• Useful when the existing frame is cracked, bent, or cosmetically damaged.

• Disconnect power (and water, if applicable) before beginning any repair.
• Handle any glass or trim pieces carefully to avoid breakage or injury.
• Replacement typically requires removing the door from its hinges and detaching exterior trim; keep fasteners organized.

The Choke Cover is an OEM part for LG microwaves. This is a protective shield that covers the microwave’s internal components, preventing interference and ensuring the safe operation of the microwave.  

Causes of a bad choke cover can include physical damage from accidental impacts, deterioration due to prolonged use, or exposure to high temperatures.

Symptoms of a bad choke cover include:

• Unusual noises during microwave operation
• Visible cracks or damage to the cover
• Microwave not heating food properly
• Sparks or arcing inside the microwave

This OEM LG part is also compatible with some Kenmore models.

The Locker is an OEM replacement part for LG microwaves. It is a metal hook located on the side of the microwave door that securely fastens the gasket and seals when closed. The door hook ensures a tight compressive fit of the door gasket all around the perimeter of the door opening. 

Symptoms of a bad door hook include:

• Gaps appearing around the door seal allowing steam or heat to escape  
• The door not sitting flush and securely closed
• Risk of accidental opening during a cooking cycle
• Reduced heating efficiency 

Causes tend to be normal wear over time, like dulling or bending of the thin metal hook. Impact or over-tightening could potentially damage or deform the hook.

This part is also compatible with Sears/Kenmore microwaves.

Replacement refrigerator door handle that restores a secure grip and easy access to the appliance. Designed to match the original fit and finish for compatible LG refrigerators, keeping doors functional and looking clean. What it does:

• Replaces cracked, broken or loose handles so the door opens and closes securely.
• Restores proper grip and reduces wobble or play that can make doors hard to operate.
• Helps prevent further cabinet or door trim damage caused by a failing handle.
• Useful when the original handle is scratched, dented or cosmetically worn.

• High-level removal/installation: remove any trim/caps, loosen mounting fasteners, swap in the replacement handle and tighten; follow the model-specific service manual for exact steps.
• Stabilize the door while working to avoid bending or damaging the hinge or gasket.
• Turn off power or ice/water features only if the model's service manual recommends it; avoid contact with electrical components.
• Reuse original screws/clips unless new fasteners are explicitly included.

This is a replacement display power control board assembly that supplies power to the front-panel display and restores visual indicators and display functions. Use it when the control/display fails to light or respond. What it does:

• Provides power and signal control for the front-panel display and indicator LEDs
• Interfaces between the main control and the display module to show status and user feedback
• Can cause a blank or flickering display, loss of display backlight, or unresponsive front-panel when faulty
• May produce intermittent display behavior or prevent error codes from appearing on the panel

• Disconnect appliance power before beginning work to avoid electrical shock
• Handle the board carefully and avoid static discharge; ground yourself before touching connectors
• Match the part number on the old board before installation and fully seat all wire harness connectors

This power control board assembly replaces the refrigerator's main power/logic PCB to restore regulated power and control to components. It helps return control functions so the appliance can run normally when the original board has failed. What it does:

• Regulates and distributes power to compressor, fans, defrost heater and user interface
• Manages control signals for cooling cycles and timed defrosts
• Supports the display and touch/selector inputs so controls respond correctly
• Can resolve symptoms such as no display or lights, compressor not running, intermittent operation or unit not cooling when caused by a failed board

• Disconnect power to the appliance before beginning work to avoid shock or damage
• Handle the board carefully and avoid electrostatic discharge; ground yourself before touching connectors
• Verify the part number on the old board matches EBR77659110, then transfer any mounting hardware or brackets as needed

This controller assembly (sub) is the sub electronic control board that manages secondary control functions, helping restore responsive controls and proper operation when the sub-board is faulty. Replace a damaged sub-controller to recover normal control signals. What it does:

• Controls secondary electronic functions and communications between main boards and components
• Restores responsive panel behavior when the sub-controller has failed
• Can resolve intermittent operation, unresponsive buttons, or communication-related error conditions
• Works as the OEM-specified replacement for the unit's sub control circuitry

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the board carefully; avoid static discharge and do not touch circuitry traces
• Verify all wire harness connectors are fully seated and routed clear of moving parts

This is the glass turntable tray for the microwave cavity. It provides a stable, heat-resistant surface that rotates food for more even heating and reheating.

• Sits on the turntable support/roller and engages the center drive
• Helps promote even cooking by rotating food through the microwave energy
• Common failure signs: cracked or missing tray, wobbling during rotation, scraping noises, or uneven heating
• Replaces a damaged tray to restore safe, stable operation

• Unplug the appliance before servicing; allow interior to cool
• Remove the old tray, clean the support/roller, and seat the new tray on the center hub
• Ensure the tray sits flat and rotates freely before use
• Handle glass carefully to avoid chips or cracks

This microwave turntable assembly supports and rotates the glass tray so food heats more evenly. Replacing a damaged turntable restores smooth, stable rotation and reliable heating performance.

• Supports dishes on the glass tray and rotates them during cooking
• Engages the drive coupler to help promote more uniform heating
• Replaces a cracked, chipped, or missing turntable assembly
• Can help address wobbling, scraping noises, or failure to turn when the tray/support are damaged

• Disconnect power to the microwave before servicing
• Remove the old tray; clean the turntable track of debris
• If your model uses a roller ring, place it on the track, then seat the tray on the center coupler; ensure it sits flat and spins freely
• Do not operate the microwave without the turntable properly installed; inspect the drive coupler and turntable motor

The Turntable Motor is an OEM replacement part for LG microwaves. Located under the microwave cavity, it rotates the special turntable platter during cooking operations.   

Symptoms of a faulty turntable motor include:

• Turntable failing to spin or rotating unevenly during cooking  
• Abnormal noises or vibrations coming from the bottom of the unit
• Uneven cooking results along microwave perimeter 

Causes related to normal wear of internal motor workings through extended use. Damage from power surges is also possible over time.

This LG replacement part is compatible with some Kenmore models as well.

This turntable coupler connects the microwave's turntable motor to the glass tray, rotating it for even, consistent heating. Replace a worn or cracked hub to restore smooth tray motion and reduce noise during cooking.

• Couples the turntable motor to the glass tray for even heating
• Replaces a worn, cracked, or stripped hub that prevents rotation
• Helps reduce tray wobble and scraping sounds from the center
• Common symptoms: tray not turning, intermittent rotation, clicking/grinding at the hub

• Disconnect power before servicing; microwaves contain high-voltage components
• Remove the glass tray and roller ring; lift the old coupler straight up from the motor shaft (some models may require access from below per instructions)
• Align the new coupler with the keyed motor shaft and press it fully into place
• Reinstall the roller ring and tray; verify smooth, centered rotation

Replacement refrigerator shelf that restores usable storage space and support for food and containers. Helps keep items organized, prevents spills, and returns a stable surface after a cracked, chipped, or missing shelf. What it does:

• Provides a flat, supportive surface for storing food, containers and small appliances
• Replaces cracked, chipped or missing shelving to restore usable interior space
• Helps reduce spills and keeps items from shifting when the door is opened or closed
• Seats into the refrigerator's existing shelf supports to re-establish stable storage

• Remove the old shelf per your owner's manual by lifting or sliding it out of the shelf supports
• Handle carefully; wear cut-resistant gloves if replacing a cracked or broken glass shelf
• Place the replacement shelf into the same supports—do not force or bend the shelf

The Grille, Vent is an OEM part for LG microwaves. The grille measures approximately 23 x 3.75 inches and is designed to cover components inside your microwave. Positioned typically at the top or front of the microwave, this grille ensures that the appliance maintains an optimal temperature, preventing overheating and ensuring efficient operation.

Symptoms of a failing Vent Grille include:

• Excessive steam or heat buildup within the microwave
• The microwave overheating during use
• Noise or vibration due to loose or damaged grille components
• Visible signs of wear, such as cracks, warping, or discoloration on the grille

Causes of a bad vent grille can include physical damage from routine cleaning or use, warping due to exposure to high temperatures, or blockages from accumulated grease and debris which can restrict airflow.

Size: 5 inches x 7 3/4 inches.

This resin cover protects internal components by shielding them from debris, moisture and accidental contact. It helps maintain safe operation and prevents damage to wiring and nearby parts when in good condition. What it does:

• Shields control components and wiring from dust, spills and physical contact
• Maintains correct component spacing and mounting alignment inside the appliance
• Reduces vibration noise caused by loose or damaged covers
• Replace if cracked, broken, warped or missing to prevent exposure and potential damage

• Disconnect power and unplug the appliance before starting any repair
• Handle part carefully to avoid cracking; use appropriate fasteners as originally installed
• Verify correct orientation and secure mounting to restore original protection

This part is the base for the small simmer burner on gas cooktops. It supports the burner cap and channels gas to the flame ports to promote consistent ignition and an even, stable flame. What it does

• Serves as the burner base for the auxiliary/simmer position
• Aligns and supports the burner cap for even flame distribution
• Routes gas from the orifice to the burner ports
• Common symptoms include weak or uneven flames, difficulty lighting with a known-good spark, or a cap that won't sit flat

• One auxiliary burner holder

• Disconnect power and shut off the gas supply before servicing
• Remove the grate and burner cap; take out mounting screws and lift off the old holder
• Transfer/reuse the orifice, igniter electrode, gasket, and hardware as applicable; seat the new holder evenly and tighten fasteners without over-torquing
• Restore gas and power; verify proper ignition and flame

The Decorative Front Panel is an OEM part for LG microwaves. It serves primarily as a cosmetic covering while also protecting internal microwave components. Maintaining an undamaged front is important for safety and aesthetics.

Causes of a bad front panel can include impacts or scratches that penetrate the protective finish. Panels are also vulnerable to general wear over years of use in busy kitchen environments.

Symptoms of a bad front panel include:

• Fading, chipped, or peeling of printed graphics 
• Dents, cracks, or holes compromising the barrier  
• Looseness, warping, or inability to securely latch
• Areas where grease, grime, or food soils are collecting

This OEM LG part is also compatible with Sears/Kenmore. Replacing only when truly damaged helps maintain your microwave's curb appeal and value.
 

This is a replacement plastic filter cover that secures and protects the appliance filter, helping maintain proper airflow and filter positioning for reliable operation. Fits into the filter housing to keep the filter sealed and supported. What it does:

• Holds the appliance filter in place to prevent shifting during operation
• Protects the filter from accidental damage and large debris
• Helps maintain proper airflow and filtration performance when installed correctly
• Commonly replaced when cracked, warped, missing, or no longer latching securely

• Disconnect power to the appliance before servicing to avoid electrical or mechanical hazards
• Remove the old cover by releasing any tabs or screws, then align new cover tabs into the housing and snap or fasten into place
• Do not force the cover; ensure proper alignment to avoid damaging mounting tabs
• If clips or screws are damaged, replace them before operating the appliance

This supporter holder is a replacement mounting bracket that secures internal components and helps maintain proper alignment for stable operation. Install the bracket to replace a cracked, broken, or missing holder and reduce movement or noise. What it does:

• Secures and supports internal assemblies or panels to keep parts aligned.
• Replaces cracked, broken, or missing holders that allow components to shift.
• Designed to match OEM mounting locations for a direct-fit replacement when used with the correct part number.

• Disconnect power (and water supply if applicable) before beginning any repair.
• Use basic hand tools; save original fasteners or replace damaged hardware with identical fasteners.
• Inspect adjacent parts and mounting points for damage and replace if necessary for a secure fit.

The Locker is an OEM part for LG microwaves. This part secures the microwave's hood in the desired position, whether it's slid out for venting or retracted for a sleek appearance.

Causes of a bad part can include mechanical wear from repeated use, physical damage or impact, or issues with the internal mechanisms that control the locking mechanism.

Symptoms of a bad Locker include:

• Difficulty in sliding the microwave hood in or out
• The hood failing to lock securely in position
• Excessive movement or rattling of the hood when locked

This OEM LG part is also compatible with some Kenmore models.

This glass turntable plate fits microwave ovens to provide a stable, rotating surface for cookware and food, helping heat items more evenly and preventing spills during operation. What it does:

• Supports dishes and containers while the microwave's turntable motor rotates them
• Promotes more even heating by allowing food to rotate during cooking
• Replaces cracked, chipped, or missing microwave glass plates
• Restores safe, stable operation when the original plate no longer seats properly

• Handle carefully; glass may be heavy or break if dropped
• Place the plate onto the microwave's roller guide/turntable support so it seats securely
• Clean with mild detergent and avoid abrasive cleaners to preserve the finish
• Do not operate the microwave without the turntable and support properly installed

This replacement holder/locker secures the door latch assembly so the door stays aligned and closes reliably, allowing the appliance's safety interlocks to engage and the unit to operate as intended. What it does:

• Supports and holds the door latch/latch assembly in the correct position
• Helps keep the door aligned and firmly closed so safety switches can engage
• Can resolve symptoms like a door that won't stay closed, door rattling, or the appliance failing to start due to an incomplete door closure
• Matches OEM service-panel location and function for straightforward swap-out

• Disconnect power (unplug or shut off breaker) before beginning any work
• Access may require removing the outer cabinet or control panel per the appliance service instructions
• Handle door and latch components carefully to avoid misalignment or damage

The Door Lock holder assembly is an OEM replacement part for LG microwaves. It is a component responsible for securely holding the microwave door in place and locking it closed. The door holder assembly works with other components like the door hinges and latch mechanism to provide a tight seal when cooking or warming food items.

Causes of a bad holder assembly can include wear and tear from frequent use, physical damage from slamming the door, or misalignment affecting its ability to lock the door.

Symptoms of a bad holder assembly include:

• The microwave door not staying closed
• The microwave not starting or operating due to door issues
• The door feeling loose or wobbly
• Audible clicks or resistance when attempting to close the door

This OEM LG part is also compatible with Sears/Kenmore models.

This door interlock micro switch is part of the microwave's latch assembly. It detects when the door is fully closed so the oven only runs when latched, helping restore safe, consistent start/stop operation.

• Senses door-latch position within the interlock assembly
• Cuts power when the door opens; permits operation when fully closed
• Helps resolve "won't start" complaints or stopping when the door is jostled
• Often fixes the need to press or lift the door to keep the unit running

• Unplug the microwave before servicing; high-voltage components can retain a dangerous charge.
• Access the interlock/latch bracket behind the control panel; note switch orientation and terminal labels (COM, NO/NC).
• Transfer wires to the new switch, secure it in the bracket, and ensure the actuator aligns with the door latch.
• Reassemble and test with a cup of water to ensure proper start/stop operation.

The Interlock Door Switch is an OEM part for LG microwaves. It is a safety component located on the door of the microwave designed to prevent the microwave from operating unless the door is securely closed. The interlock door switch works with the microwave's electronic control board to sense when the door is open or closed and allow or disallow operation accordingly.

Causes of a bad interlock door switch can include normal wear and tear from repeated opening and closing of the microwave door over time.

Symptoms of a bad interlock door switch include:

• The microwave runs or heats with the door open
• Error codes or diagnostic messages related to door sensors on the control board
• The microwave fails to operate even when the door is securely closed

This OEM LG part is also compatible with some Sears/Kenmore microwaves.

This replacement holder secures the appliance door latch assembly, restoring proper catch and alignment for reliable closing. It helps maintain safe door engagement and prevents the door from popping open during use. What it does

• Secures the door latch keeper so the latch can engage and hold the door closed
• Restores proper door alignment and reduces door rattle or incomplete latching
• Addresses symptoms such as a door that won't stay closed or that pops open during operation
• Works as the mounting/retaining piece for the latch assembly in the door frame

• One holder locker part

• Basic hand tools are typically required; follow the appliance service manual for disassembly steps
• Disconnect power (and gas if applicable) before servicing to avoid injury
• Inspect the latch and strike for wear when replacing this part; replace any damaged components

The Time Delay Fuse is an OEM part for LG microwaves. This fuse provides a safety mechanism by delaying the flow of electricity, protecting the microwave's electrical components from power surges and ensuring the appliance operates safely. It helps to prevent immediate damage in the event of a power surge or electrical fault, thus prolonging the lifespan of the microwave.

Over time, the time delay fuse can become damaged due to electrical surges, wear and tear, or faulty connections. If the fuse blows, it can disrupt the microwave’s ability to function correctly.

Symptoms of a bad time delay fuse include:

• The microwave not turning on
• No response from the microwave control panel
• The microwave stopping unexpectedly during operation
• Electrical issues or blown circuits in the microwave

This OEM LG part is also compatible with Sears/Kenmore models.

The Cooling Fan Blade is an OEM part for LG microwaves. It circulates airflow around internal components to reduce temperatures during cooking.  

As it operates continuously, the tightly wound coils of the fan motor are prone to degradation and wear over several years of use. Damage to the fan housing can also inhibit proper functioning.

Causes of a bad cooling fan blade include:

• Broken or cracked plastic that unbalances the unit
• Worn down edges that decrease efficiency 
• Accumulated dirt that impedes ventilation

Symptoms of a bad cooling fan blade include:

• Overheating trips from the thermal cut-off  
• Cook times lengthening due to inefficient cooling
• Rattling or vibration noises emanating during operation

This OEM LG replacement ensures balanced airflow and consistent cooling for years of use. It is also compatible with some Kenmore and Sears/Kenmore microwaves.

The Magnetron is an OEM part for LG microwaves. It is responsible for generating the microwaves that cook or heat the food inside the appliance. The magnetron converts electrical energy into microwave radiation, ensuring efficient and even heating.

Causes of a bad magnetron can include prolonged use, electrical surges, or overheating. Over time, these factors can lead to the magnetron wearing out or failing completely.

Symptoms of a bad Magnetron include:

• The microwave not heating food
• Strange noises during operation
• Burning smell or smoke
• The microwave shutting off unexpectedly

This OEM LG part is also compatible with Sears/Kenmore models.

A direct-replacement power cord assembly that restores a secure electrical connection to the appliance. Replaces a damaged or worn cord to help regain reliable power and reduce risk of arcing or intermittent operation. What it does:

• Provides the appliance's main AC power connection to the household outlet.
• Replaces frayed, cracked, or burned cords that can cause intermittent power or complete loss of power.
• Helps eliminate loose-terminal or plug issues that can cause sparking or a burning smell.
• Ensures proper fit and routing when the correct cord and terminals are used for the appliance.

• One power cord assembly.

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Route the cord away from moving parts and heat sources; secure strain relief or clamp per the appliance cabinet.

This humidity sensor assembly monitors moisture inside the microwave cavity during Sensor Cook and Reheat cycles, allowing the control to automatically adjust time and power. Replacing a failed sensor can restore accurate, reliable sensor-based cooking performance. What it does:

• Detects steam/humidity in the cavity for auto-sensing cook and reheat programs
• Sends feedback to the control board to adjust power levels and cook time
• Failure symptoms include sensor cook not starting, stopping early, "sensor" error messages, or inconsistent results on auto settings

• One humidity sensor assembly

• Unplug the appliance before service; microwaves contain a high-voltage capacitor that can retain a dangerous charge
• Handle the sensor face carefully and keep it clean; route and secure the wire harness as originally

This cooling fan motor spins the internal fan that moves air through the appliance to dissipate heat and protect sensitive components. Replacing a noisy, weak, or seized motor restores proper airflow and dependable operation.

• Drives the cooling fan to circulate cooling air within the cabinet
• Helps prevent overheating and thermal shutdowns of internal parts
• Restores airflow when the original motor is worn, noisy, or not turning
• Typical signs include no fan movement, unusual humming/squealing, reduced airflow, or the unit shutting off from heat

• Disconnect power (and gas, if applicable) before servicing; allow the appliance to cool completely
• Access the motor by removing the appropriate rear/top or control-panel cover for your model
• Note wire orientation; transfer the fan blade and any mounting parts from the original motor if required
• After installation, ensure the fan spins freely and verify proper airflow and quiet operation

The Light Bulb is an OEM part for LG microwaves. It provides illumination inside the microwave oven, allowing users to monitor the cooking process and check the condition of the food without opening the door.

Causes of a bad light bulb can include normal wear and tear, electrical surges, or damage due to impact or overheating. Over time, the filament inside the bulb can burn out, or the bulb itself can become loose or disconnected.

Symptoms of a bad light bulb include:

• The microwave interior light not turning on
• Flickering or dimming of the light
• Intermittent lighting during operation

This OEM LG part is also compatible with Sears/Kenmore models.

The Thermostat is an OEM part for LG microwaves. This part monitors and regulates the temperature within the appliance. The thermostat ensures that the microwave does not overheat, automatically shutting off the power if the internal temperature exceeds safe levels. This preventive measure helps to avoid damage to the microwave and potential safety hazards in the kitchen. 

Causes of a bad thermostat can range from normal wear and tear, which may cause the component to lose its calibration over time, to overheating incidents that permanently damage its sensitivity.

Symptoms of a bad Microwave Thermostat include:

• The microwave unexpectedly turning off during use
• The microwave failing to start
• Inconsistent cooking temperatures or unevenly cooked food

This OEM LG part is also compatible with some Kenmore models.

The Diode Assembly is an OEM replacement part for LG microwaves. As an electrical part, it plays a key role in regulating power distribution throughout the microwave. 

Symptoms of a bad diode assembly can include:

• Lights or displays failing to illuminate  
• Inability to power the microwave or select cooking functions
• Intermittent or unexpected shutting off during use
• Sparking, burning smells or tripped circuit breakers

Causes may arise from repetitively fluctuating power loads degrading individual diodes over time. Moisture intrusion into electrical pathways can also cause issues.

This genuine LG OEM assembly is also compatible with some Kenmore microwave models as well. 

This fan assembly replaces the oven/range cooling blower to restore proper airflow and help prevent overheating of control electronics. It's a direct-fit assembly designed to replace a failed or noisy blower unit. What it does:

• Circulates air to cool control components and maintain safe operating temperatures
• Replaces worn or failed blower motor that won't start or runs intermittently
• Restores airflow when the appliance is running hot or control board overheats
• Reduces rattling or grinding noise caused by a damaged fan or housing

• Turn off power to the appliance at the breaker before starting any repairs
• Inspect mounting points and wiring harness for damage; replace connectors if frayed
• Follow OEM service manual for removal and reinstallation torque and routing

This bottom plate is the interior panel that covers and protects the oven or microwave floor, giving a clean cooking surface and shielding internal components from spills and debris. It helps maintain safe, reliable operation. What it does:

• Covers the appliance interior floor to catch drips and crumbs and keep them away from heating and mechanical parts
• Protects underlying components from corrosion and food damage
• Helps maintain even heat distribution by providing a stable cooking surface
• Worn, bent or missing plates can cause excessive debris buildup, odors, or contact with moving parts

• Disconnect power (unplug or switch off breaker) and allow the appliance to cool before starting
• Handle carefully—edges may be sharp; wear gloves if needed
• Install with existing factory screws or clips; do not force or bend the plate
• If other parts are damaged or missing, replace them per the manufacturer's instructions

The Charcoal Filter is an OEM part for LG microwaves. It plays a crucial role in filtering and removing odors, smoke, and grease particles from the air during cooking. It is constructed with activated charcoal, which has absorbent properties and helps to eliminate cooking odors.

Over time, the charcoal filter can become saturated and less effective in odor removal. It is recommended to replace the charcoal filter periodically to maintain optimal performance and ensure clean and fresh air in your kitchen.

Symptoms of a saturated or clogged charcoal filter may include:

• Lingering cooking odors in the kitchen
• Reduced efficiency in capturing smoke or grease particles
• The presence of visible debris or discoloration on the filter

This OEM LG part can also be used on Kenmore/Sears appliances. 

This replacement lamp socket holds the light bulb and provides a stable electrical connection so your appliance light works reliably. Replace a heat-damaged or loose socket to restore consistent illumination and help prevent flicker, arcing, and premature bulb failure.

• Secures the bulb and connects it to power
• Restores proper interior or work-area lighting
• Addresses flickering, intermittent light, or bulbs failing early from poor contact
• Replaces sockets that are cracked, melted, or discolored

• Disconnect power at the breaker or unplug before servicing
• Allow the area to cool; wear gloves and safety glasses
• Note wire positions and transfer one lead at a time to the new socket
• If servicing a microwave, access only the lamp area per your model instructions; do not open the cabinet—internal components can retain high voltage

This fan assembly replaces the oven/range cooling blower to restore proper airflow and help prevent overheating of control electronics. It's a direct-fit assembly designed to replace a failed or noisy blower unit. What it does:

• Circulates air to cool control components and maintain safe operating temperatures
• Replaces worn or failed blower motor that won't start or runs intermittently
• Restores airflow when the appliance is running hot or control board overheats
• Reduces rattling or grinding noise caused by a damaged fan or housing

• Turn off power to the appliance at the breaker before starting any repairs
• Inspect mounting points and wiring harness for damage; replace connectors if frayed
• Follow OEM service manual for removal and reinstallation torque and routing

Stirrer fan cover that protects and secures the microwave's stirrer fan assembly, helping keep food debris out and the rotating stirrer operating smoothly to reduce noise and maintain consistent performance. What it does:

• Encloses and shields the stirrer fan assembly from food particles and foreign objects.
• Keeps the stirrer properly positioned so the fan and stirring mechanism can rotate without interference.
• Helps limit vibration and rattling caused by a loose or damaged cover.
• Visible cracks or breaks in the cover can lead to noisy operation, poor stirring action, or intermittent fan contact.

• Disconnect power before servicing the appliance to avoid shock or injury.
• Replacement requires removal of the microwave outer cabinet and access to the stirrer/fan area; retain all mounting screws and hardware.
• Inspect surrounding parts when replacing the cover; do not operate the appliance with a cracked or missing cover.
• Use the correct part number to ensure fit and function.

This synchronous circulation motor powers the appliance's circulation function to move air or liquids reliably, restoring proper flow and operation. Designed to match OEM fit and performance for compatible LG units. What it does:

• Drives the appliance's circulation system to maintain proper airflow or fluid movement
• Helps resolve symptoms like weak or no circulation, reduced performance, or unusual motor noise
• Operates at consistent speed for steady system performance common to synchronous motors

• For safety, disconnect power before accessing the appliance and working near electrical components
• Install using OEM mounting points and connectors; verify alignment before securing
• Handle the motor carefully to avoid damage to the shaft and wiring

This supporter motor is the mounting support assembly that holds and stabilizes the appliance motor, helping maintain proper alignment and reduce vibration for reliable operation. It restores secure motor positioning after wear or damage. What it does

• Supports and secures the motor housing to prevent movement during operation
• Reduces excessive vibration and noise caused by a loose or worn motor mount
• Helps keep the motor aligned so the drivetrain and drum/tumbler run smoothly
• Used when visual damage or cracking is present on the motor support

• Disconnect power (and gas if applicable) before beginning any repair
• Access may require removing the appliance rear or front panel and supporting the motor/drum while swapping the part
• Verify mounting orientation and fastener locations match removed part; retain any grommets or isolators if present
• If wiring is attached, note connector positions before disconnecting.

This lamp cover is the clear interior lens that protects and diffuses the appliance light, restoring even illumination and shielding the bulb from spills and debris. It's a direct-fit replacement designed to match the original lens shape. What it does:

• Protects the interior light bulb from food, grease, and impact
• Diffuses and directs light for even interior illumination
• Replaces cracked, discolored, or missing lamp lenses
• Helps prevent direct contact with the bulb for safer operation

• One lamp cover (lens) as shown

• Disconnect power before servicing to avoid electrical shock
• Handle the lens carefully—it may be glass or brittle plastic and can break if dropped
• Remove mounting screws or clips that secure the old lens, lift out, and install the replacement in the same orientation
• Test the light after reassembly; do not operate if mounting is damaged or the lens is not secured

The Magnetron Thermostat is an OEM part for LG microwaves and built-in ranges. Its primary function is to monitor the temperature and ensure that it remains within a safe operating range. If the temperature exceeds the preset limit, the thermostat will interrupt the power supply to the magnetron, preventing overheating and potential damage.

Causes of a faulty magnetron thermostat can include electrical malfunctions, component failures, or physical damage. These factors can result in issues such as erratic heating, microwave not heating properly, or the appliance shutting off unexpectedly.

Symptoms of a bad magnetron thermostat may include:

• Microwave not heating food evenly or at all
• Inconsistent or weak heating performance
• Microwave shutting off or displaying error codes related to temperature issues

This OEM LG part can also be used on Kenmore/Sears appliances. 

This is a motor start/run capacitor that helps the appliance's motor start and run smoothly by supplying a brief boost of electrical energy. Replacing a failing capacitor restores reliable motor startup and operation. What it does:

• Provides the brief electrical surge needed to start and keep the motor running
• Commonly linked to motors that hum, fail to start, or run intermittently
• Helps prevent overheating from repeated start attempts when functioning properly
• Works with the appliance's start circuitry to ensure consistent performance

• Disconnect power to the appliance before accessing electrical components
• Discharge the capacitor and use insulated tools
• Observe polarity/terminal layout and secure connections to factory specifications
• Dispose of the old capacitor according to local electronic-waste regulations

This plate assembly base supports the microwave turntable, keeping the glass tray centered and stable so cookware rotates evenly for consistent heating. It replaces a worn or damaged base to restore proper turntable support. What it does:

• Provides the rotating support surface beneath the glass turntable to keep it level and centered
• Helps the turntable rotate smoothly; can resolve wobbling, slipping, or uneven spinning
• Restores correct alignment between the glass tray and motor drive coupling
• Reduces noise caused by a cracked or warped base that no longer seats the tray properly

• One plate assembly base

• Disconnect power before servicing the appliance to avoid electrical shock
• Handle the glass turntable carefully when removing and reinstalling to prevent breakage
• Ensure the base seats fully in the cavity and the glass tray is properly centered
• If the turntable still does not rotate after installation, check the drive coupling and motor for faults

The Mounting Plate is an OEM part for LG microwaves. This part is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.

Causes of a bad Mounting Plate can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.

Symptoms of a bad Mounting Plate include:

• Loose microwave unit
• Difficulty in aligning or installing the microwave 
• Visible signs of wear, rust, or damage on the plate

This OEM LG part can also be used on Kenmore/Sears appliances.

The Microwave Mounting Hardware Kit is an OEM part for LG microwaves. This kit contains all of the necessary hardware to properly mount and install an LG microwave. It ensures that the microwave is securely fastened to the cabinet or installed above the range.

Causes of faulty mounting hardware include lack of proper installation, missing or lost pieces over time, or damage.

Symptoms of missing or damaged mounting hardware include:

• Microwave not sitting securely on the mounting plate or surface
• Movement or wobbling of the microwave during operation
• Risk of the microwave falling if not properly secured

This LG part is also compatible with some Kenmore models.

The Damper Bracket is an OEM component for LG microwaves. Located inside the microwave cavity above the wave stirrer, this bracket holds the position of the damper assembly that helps distribute heat evenly during cooking. The bracket measures approximately 12” by 5”.

Symptoms of a bad damper bracket can include:  

• Hot or cold spots developing within the microwave cavity
• Looseness in the damper assembly fit
• Reduced heat circulation leading to uneven cooking

Causes typically consist of cracking over long-term heat exposure. Repeated opening/closing of the damper may also weaken attachment points on the bracket.

This OEM LG part is also compatible with Sears/Kenmore microwaves. 

The Damper is an OEM component for LG microwaves. Located within the cooking cavity, it regulates airflow and safely vents steam escaping heated foods. 

Causes of a faulty damper can involve standard wear and exposure accepting steam and condensation release. Food or liquid particles drying within tracks also threaten eventual adhesion issues restricting travel if left unaddressed between cleanings.

Symptoms of a damaged or defective damper include:

• Inability to adequately vent excess moisture from heating  
• Potential messes spilling beyond the microwave frame  
• Grating sounds or squeaks emitting during cooking
• Flaps possibly stuck inhibiting steam circulation 

This damper is also compatible with Kenmore microwaves as well.