Parts for Lg LMV1762SW/00: Other Parts

The TEMPLATE is an OEM part for LG microwaves. It is the outer casing and control panel covering that defines the microwave's design and aesthetics.  

The causes of a bad template can include cracks, dents, or damage to the outer surface from impacts or normal wear over time. Heat and humidity fluctuations can also cause template materials to degrade.

Symptoms of a bad template include:

• Cracks or breaks in the template material
• Loose, misaligned, or damaged control panel or display  
• Yellowing, warping, or discoloration of plastics
• Openings or gaps that compromise the microwave structure

This genuine OEM LG replacement part restores the microwave's appearance and protects internal components. It is also compatible with some Kenmore and Sears microwaves
 

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

This door frame assembly replaces the appliance's outer door trim and support to restore proper door fit and protect the inner door components. Ideal when the door frame is cracked, bent, or no longer secures the door evenly. What it does:

• Restores the outer door trim and structural support so the door closes and latches properly.
• Protects the door glass and inner components from impact and moisture intrusion.
• Helps eliminate gaps or misalignment that can cause rattling, air leaks, or difficulty closing the door.
• Matches the OEM form for a direct replacement when the original frame is damaged.

• Disconnect power and unplug the appliance before starting any repair.
• Remove the existing door trim/frame by loosening the retaining screws or clips; handle any glass carefully.
• Check door alignment and seal after installation; adjust hinge or strike as needed for proper fit.
• If the assembly has bonded or sealed components, consider replacing any associated gasket or fasteners if damaged.

Inner plastic door film covers the holes in the inner door frame.

The Choke Cover is an OEM part for LG microwaves. This is a protective shield that covers the microwave’s internal components, preventing interference and ensuring the safe operation of the microwave.  

Causes of a bad choke cover can include physical damage from accidental impacts, deterioration due to prolonged use, or exposure to high temperatures.

Symptoms of a bad choke cover include:

• Unusual noises during microwave operation
• Visible cracks or damage to the cover
• Microwave not heating food properly
• Sparks or arcing inside the microwave

This OEM LG part is also compatible with some Kenmore models.

The Locker is an OEM replacement part for LG microwaves. It is a metal hook located on the side of the microwave door that securely fastens the gasket and seals when closed. The door hook ensures a tight compressive fit of the door gasket all around the perimeter of the door opening. 

Symptoms of a bad door hook include:

• Gaps appearing around the door seal allowing steam or heat to escape  
• The door not sitting flush and securely closed
• Risk of accidental opening during a cooking cycle
• Reduced heating efficiency 

Causes tend to be normal wear over time, like dulling or bending of the thin metal hook. Impact or over-tightening could potentially damage or deform the hook.

This part is also compatible with Sears/Kenmore microwaves.

This power control board assembly replaces the appliance's main power/control PCB to restore reliable power distribution and control logic. It helps the unit run cycles and respond correctly to user inputs when the original board fails. What it does:

• Regulates and distributes power to motors, valves, and user-interface components
• Processes control signals and runs programmed cycles for normal operation
• Can stop error-code-driven lockouts caused by a failed control board

• Disconnect all power (unplug or switch off breaker) before starting any work
• Take static-discharge precautions and handle the PCB by its edges
• Note connector locations and take photos before disconnecting wiring harnesses

This metal mounting bracket secures the appliance control panel to the console, restoring a stable user interface and preventing loose or misaligned controls. It's a direct-fit replacement designed to revive panel alignment and tactile feedback. What it does

• Secures the control panel assembly to the appliance frame so buttons and display stay properly aligned
• Prevents the control panel from sagging, shifting, or vibrating during use
• Helps restore reliable button actuation and consistent control contact
• Addresses symptoms like a loose, wobbly, or misaligned control console

• One control panel mounting bracket

• Disconnect power before starting any repair to avoid shock or damage
• Access typically requires removing the console or top panel—keep fasteners organized
• Reuse OEM screws if service instructions advise; replace any stripped hardware

The LG microwave glass tray is an OEM replacement part for LG countertop microwaves. Located inside the microwave cavity, the glass tray provides a flat, durable surface for cooking and heating food items. The tray measures about 13 inches in diameter.

Causes of a bad glass tray can include cracks or chips from impact damage, prolonged exposure to high heat levels, or chemical etching from acidic food spills.

Symptoms of a bad glass tray microwave include:

• Cracks, chips, or breaks in the glass compromising structural integrity
• Difficulty removing or placing the tray due to a poor sliding fit  
• Food particles or liquids seeping below the tray and needing cleaning
• Visibility issues looking inside the microwave cavity  

This OEM LG part is also compatible with Sears/Kenmore countertop microwave models.

This microwave turntable assembly supports and rotates the glass tray so food heats more evenly. Replacing a damaged turntable restores smooth, stable rotation and reliable heating performance.

• Supports dishes on the glass tray and rotates them during cooking
• Engages the drive coupler to help promote more uniform heating
• Replaces a cracked, chipped, or missing turntable assembly
• Can help address wobbling, scraping noises, or failure to turn when the tray/support are damaged

• Disconnect power to the microwave before servicing
• Remove the old tray; clean the turntable track of debris
• If your model uses a roller ring, place it on the track, then seat the tray on the center coupler; ensure it sits flat and spins freely
• Do not operate the microwave without the turntable properly installed; inspect the drive coupler and turntable motor

The Turntable Motor is an OEM replacement part for LG microwaves. Located under the microwave cavity, it rotates the special turntable platter during cooking operations.   

Symptoms of a faulty turntable motor include:

• Turntable failing to spin or rotating unevenly during cooking  
• Abnormal noises or vibrations coming from the bottom of the unit
• Uneven cooking results along microwave perimeter 

Causes related to normal wear of internal motor workings through extended use. Damage from power surges is also possible over time.

This LG replacement part is compatible with some Kenmore models as well.

This replacement door glass restores a clear viewing window and the protective barrier on your microwave door. Replace it when the original panel is cracked, shattered, or heavily scratched to keep the door secure and safe to use.

• Provides the see-through window and protective barrier within the microwave door
• Helps maintain proper door rigidity and alignment when intact
• Replace if the glass is cracked, chipped, shattered, loose, or badly scratched
• Reduced visibility, rattling, or visible damage are common symptoms of failure

• Unplug the microwave before servicing; microwaves can retain high voltage—use caution and do not open the cabinet
• Support the door; removal from the hinges may be required per your model's diagram
• Handle glass with cut-resistant gloves; edges can be sharp
• Transfer any reusable trim/clips as directed and verify the door latches and closes properly after installation

This turntable coupler connects the microwave's turntable motor to the glass tray, rotating it for even, consistent heating. Replace a worn or cracked hub to restore smooth tray motion and reduce noise during cooking.

• Couples the turntable motor to the glass tray for even heating
• Replaces a worn, cracked, or stripped hub that prevents rotation
• Helps reduce tray wobble and scraping sounds from the center
• Common symptoms: tray not turning, intermittent rotation, clicking/grinding at the hub

• Disconnect power before servicing; microwaves contain high-voltage components
• Remove the glass tray and roller ring; lift the old coupler straight up from the motor shaft (some models may require access from below per instructions)
• Align the new coupler with the keyed motor shaft and press it fully into place
• Reinstall the roller ring and tray; verify smooth, centered rotation

Replacement refrigerator shelf that restores usable storage space and support for food and containers. Helps keep items organized, prevents spills, and returns a stable surface after a cracked, chipped, or missing shelf. What it does:

• Provides a flat, supportive surface for storing food, containers and small appliances
• Replaces cracked, chipped or missing shelving to restore usable interior space
• Helps reduce spills and keeps items from shifting when the door is opened or closed
• Seats into the refrigerator's existing shelf supports to re-establish stable storage

• Remove the old shelf per your owner's manual by lifting or sliding it out of the shelf supports
• Handle carefully; wear cut-resistant gloves if replacing a cracked or broken glass shelf
• Place the replacement shelf into the same supports—do not force or bend the shelf

Size: 5 inches x 7 3/4 inches.

The Light Bulb is an OEM part for LG microwaves. It provides illumination inside the microwave oven, allowing users to monitor the cooking process and check the condition of the food without opening the door.

Causes of a bad light bulb can include normal wear and tear, electrical surges, or damage due to impact or overheating. Over time, the filament inside the bulb can burn out, or the bulb itself can become loose or disconnected.

Symptoms of a bad light bulb include:

• The microwave interior light not turning on
• Flickering or dimming of the light
• Intermittent lighting during operation

This OEM LG part is also compatible with Sears/Kenmore models.

This part is the base for the small simmer burner on gas cooktops. It supports the burner cap and channels gas to the flame ports to promote consistent ignition and an even, stable flame. What it does

• Serves as the burner base for the auxiliary/simmer position
• Aligns and supports the burner cap for even flame distribution
• Routes gas from the orifice to the burner ports
• Common symptoms include weak or uneven flames, difficulty lighting with a known-good spark, or a cap that won't sit flat

• One auxiliary burner holder

• Disconnect power and shut off the gas supply before servicing
• Remove the grate and burner cap; take out mounting screws and lift off the old holder
• Transfer/reuse the orifice, igniter electrode, gasket, and hardware as applicable; seat the new holder evenly and tighten fasteners without over-torquing
• Restore gas and power; verify proper ignition and flame

This supporter assembly is a direct-fit replacement support bracket that helps stabilize the washer's rotating tub assembly and restore proper alignment for quieter, more reliable operation. What it does:

• Holds and supports the tub/drum assembly to reduce excessive movement during spin cycles
• Helps minimize vibration and rattling caused by worn or damaged support components
• Restores alignment to prevent rubbing or irregular drum motion
• Contributes to smoother, quieter operation when installed correctly

• Disconnect power and water before beginning any repairs
• Basic disassembly of the cabinet or front panel may be required; follow the service manual
• Use proper hand tools and take care around sharp edges and suspension components

The Door Lock holder assembly is an OEM replacement part for LG microwaves. It is a component responsible for securely holding the microwave door in place and locking it closed. The door holder assembly works with other components like the door hinges and latch mechanism to provide a tight seal when cooking or warming food items.

Causes of a bad holder assembly can include wear and tear from frequent use, physical damage from slamming the door, or misalignment affecting its ability to lock the door.

Symptoms of a bad holder assembly include:

• The microwave door not staying closed
• The microwave not starting or operating due to door issues
• The door feeling loose or wobbly
• Audible clicks or resistance when attempting to close the door

This OEM LG part is also compatible with Sears/Kenmore models.

This door interlock micro switch is part of the microwave's latch assembly. It detects when the door is fully closed so the oven only runs when latched, helping restore safe, consistent start/stop operation.

• Senses door-latch position within the interlock assembly
• Cuts power when the door opens; permits operation when fully closed
• Helps resolve "won't start" complaints or stopping when the door is jostled
• Often fixes the need to press or lift the door to keep the unit running

• Unplug the microwave before servicing; high-voltage components can retain a dangerous charge.
• Access the interlock/latch bracket behind the control panel; note switch orientation and terminal labels (COM, NO/NC).
• Transfer wires to the new switch, secure it in the bracket, and ensure the actuator aligns with the door latch.
• Reassemble and test with a cup of water to ensure proper start/stop operation.

The Interlock Door Switch is an OEM part for LG microwaves. It is a safety component located on the door of the microwave designed to prevent the microwave from operating unless the door is securely closed. The interlock door switch works with the microwave's electronic control board to sense when the door is open or closed and allow or disallow operation accordingly.

Causes of a bad interlock door switch can include normal wear and tear from repeated opening and closing of the microwave door over time.

Symptoms of a bad interlock door switch include:

• The microwave runs or heats with the door open
• Error codes or diagnostic messages related to door sensors on the control board
• The microwave fails to operate even when the door is securely closed

This OEM LG part is also compatible with some Sears/Kenmore microwaves.

The Time Delay Fuse is an OEM part for LG microwaves. This fuse provides a safety mechanism by delaying the flow of electricity, protecting the microwave's electrical components from power surges and ensuring the appliance operates safely. It helps to prevent immediate damage in the event of a power surge or electrical fault, thus prolonging the lifespan of the microwave.

Over time, the time delay fuse can become damaged due to electrical surges, wear and tear, or faulty connections. If the fuse blows, it can disrupt the microwave’s ability to function correctly.

Symptoms of a bad time delay fuse include:

• The microwave not turning on
• No response from the microwave control panel
• The microwave stopping unexpectedly during operation
• Electrical issues or blown circuits in the microwave

This OEM LG part is also compatible with Sears/Kenmore models.

The Transformer is an OEM part for LG microwaves. It is responsible for stepping down high voltage current from the wall outlet to safe low voltage used by the microwave's electronic control system. Located inside the microwave cabinet beneath the turntable mechanism, the transformer supplies precise power to crucial components including the magnetron, control console, and touch controls.

Causes of a transformer failing include stresses from constant heating and electromagnetic flux over many years, damage from water damage, or manufacturing defects.  

Symptoms of a bad transformer include:

• Microwave failing to heat or function 
• Faulty or unresponsive control panel and display
• Buzzing or humming noises emanating from inside

This genuine LG replacement ensures all electronic systems receive stabilized power safely. Compatible with Sears/Kenmore branded microwaves using LG components.

The Magnetron is an OEM part for LG microwaves. As the primary cooking mechanism, it generates microwave energy to heat and cook foods quickly.

Causes can be from normal wear and tear over years of use. Damage may also occur if the microwave interior is exposed to moisture, spills or debris.

Symptoms of a faulty magnetron include:

• Slow or ineffective cooking
• Hot or cold spots in cooked foods
• Buzzing or humming noises emanating from inside the microwave

This OEM LG part is also compatible with some Kenmore models.

A direct-replacement power cord assembly that restores a secure electrical connection to the appliance. Replaces a damaged or worn cord to help regain reliable power and reduce risk of arcing or intermittent operation. What it does:

• Provides the appliance's main AC power connection to the household outlet.
• Replaces frayed, cracked, or burned cords that can cause intermittent power or complete loss of power.
• Helps eliminate loose-terminal or plug issues that can cause sparking or a burning smell.
• Ensures proper fit and routing when the correct cord and terminals are used for the appliance.

• One power cord assembly.

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Route the cord away from moving parts and heat sources; secure strain relief or clamp per the appliance cabinet.

This single wire harness routes power and signals between an appliance's internal components to restore reliable electrical connections. It replaces a damaged or worn harness to help re-establish proper circuit continuity and component control. What it does:

• Carries power and control signals between control board and components
• Restores continuity when wiring is damaged, frayed, or has broken connectors
• Can resolve symptoms such as no power to a component, intermittent operation, or related error codes
• Helps prevent shorting or arcing from exposed or compromised wiring

• Disconnect power to the appliance before beginning any repair
• Take photos of original routing and connector positions to ensure correct reinstallation
• Replace only the harness shown; match connector shapes and pin counts before connecting
• Route and secure the harness away from sharp edges, moving parts, and heat sources

The Thermostat is an OEM part for LG microwaves. This part monitors and regulates the temperature within the appliance. The thermostat ensures that the microwave does not overheat, automatically shutting off the power if the internal temperature exceeds safe levels. This preventive measure helps to avoid damage to the microwave and potential safety hazards in the kitchen. 

Causes of a bad thermostat can range from normal wear and tear, which may cause the component to lose its calibration over time, to overheating incidents that permanently damage its sensitivity.

Symptoms of a bad Microwave Thermostat include:

• The microwave unexpectedly turning off during use
• The microwave failing to start
• Inconsistent cooking temperatures or unevenly cooked food

This OEM LG part is also compatible with some Kenmore models.

This fuse assembly replaces a blown thermal fuse to restore overheat protection and help a dryer heat safely. It's the direct-fit component used in the appliance's safety circuit to shut off power if temperatures get too high. What it does:

• Interrupts power when excessive heat is detected to prevent overheating or fire risk
• Stops heating when the thermal element fails or air flow is restricted
• Commonly used when the dryer won't heat or trips the house circuit
• Works as part of the appliance's safety/temperature control system

• Disconnect power before inspecting or replacing the fuse to avoid shock or injury
• Replace only with the exact part number to retain OEM safety ratings
• Handle with care; do not attempt repairs on wiring or connectors
• After replacement, test the appliance on a short cycle and monitor for normal operation

This fan assembly moves air through the unit to cool internal components and maintain proper ventilation. Replacing a worn or seized fan restores correct airflow, helps prevent overheating, and reduces excessive noise from a failing motor or wheel.

• Circulates cooling air across internal components to prevent overheating
• Exhausts air through the vent/duct path for proper ventilation
• Common symptoms: fan not running, weak airflow, or loud rattling/squealing
• Unit may overheat or shut off during use when the fan fails

• Disconnect power before service; microwaves contain a high-voltage capacitor that can retain a dangerous charge—follow proper safety procedures.
• Remove access panels to reach the fan housing; note airflow direction and wire orientation.
• Transfer any brackets, grommets, or screws from the original assembly if required.
• After installation, verify the wheel spins freely and airflow direction is correct before reassembly.

This mechanical charcoal refrigerator filter helps reduce food and fridge odors for fresher-smelling compartments. It's a direct-fit replacement that restores odor-absorbing capability so your fridge interior smells cleaner. What it does

• Adsorbs and traps common food and household odors to reduce smells in the fridge
• Helps prevent odor transfer between compartments and stored foods
• Restores the intended odor-control function when the original filter is spent or clogged
• Works as a simple replaceable cartridge in compatible LG refrigerator filter housings

• One mechanical charcoal refrigerator filter cartridge

• High-level replacement: remove the old filter cartridge and snap or twist the new cartridge into the filter housing per the refrigerator manual
• Follow the refrigerator manufacturer's instructions for alignment and secure seating to avoid leaks or loss of function
• Disconnect power or follow any appliance-specific safety steps recommended by the manufacturer before servicing
• Dispose of the used filter per local regulations for household waste

This replacement lamp socket holds the light bulb and provides a stable electrical connection so your appliance light works reliably. Replace a heat-damaged or loose socket to restore consistent illumination and help prevent flicker, arcing, and premature bulb failure.

• Secures the bulb and connects it to power
• Restores proper interior or work-area lighting
• Addresses flickering, intermittent light, or bulbs failing early from poor contact
• Replaces sockets that are cracked, melted, or discolored

• Disconnect power at the breaker or unplug before servicing
• Allow the area to cool; wear gloves and safety glasses
• Note wire positions and transfer one lead at a time to the new socket
• If servicing a microwave, access only the lamp area per your model instructions; do not open the cabinet—internal components can retain high voltage

This fan assembly moves air through the unit to cool internal components and maintain proper ventilation. Replacing a worn or seized fan restores correct airflow, helps prevent overheating, and reduces excessive noise from a failing motor or wheel.

• Circulates cooling air across internal components to prevent overheating
• Exhausts air through the vent/duct path for proper ventilation
• Common symptoms: fan not running, weak airflow, or loud rattling/squealing
• Unit may overheat or shut off during use when the fan fails

• Disconnect power before service; microwaves contain a high-voltage capacitor that can retain a dangerous charge—follow proper safety procedures.
• Remove access panels to reach the fan housing; note airflow direction and wire orientation.
• Transfer any brackets, grommets, or screws from the original assembly if required.
• After installation, verify the wheel spins freely and airflow direction is correct before reassembly.

This stirrer fan cover shields the stirrer assembly at the top of the microwave cavity, helping distribute cooking energy evenly and protecting the fan from grease and splatter. Replace a cracked or burnt cover to help prevent arcing.

• Protects the stirrer fan and opening from grease, moisture, and debris
• Helps promote more even microwave energy distribution for consistent heating
• Replace if the cover is cracked, warped, burnt, missing, or won't stay secured
• Can address symptoms such as interior arcing/sparking, rattling from the top, and uneven heating

• Disconnect power: unplug the unit or switch off the circuit breaker before servicing
• Work only inside the cooking cavity; do not access internal high-voltage components
• Remove the existing cover (screw or snap tabs), note orientation, and retain any hardware for reuse
• Seat the new cover fully and secure before restoring power; test for proper operation

The Magnetron Thermostat is an OEM part for LG microwaves and built-in ranges. Its primary function is to monitor the temperature and ensure that it remains within a safe operating range. If the temperature exceeds the preset limit, the thermostat will interrupt the power supply to the magnetron, preventing overheating and potential damage.

Causes of a faulty magnetron thermostat can include electrical malfunctions, component failures, or physical damage. These factors can result in issues such as erratic heating, microwave not heating properly, or the appliance shutting off unexpectedly.

Symptoms of a bad magnetron thermostat may include:

• Microwave not heating food evenly or at all
• Inconsistent or weak heating performance
• Microwave shutting off or displaying error codes related to temperature issues

This OEM LG part can also be used on Kenmore/Sears appliances. 

This microwave lamp holder secures the light bulb and provides the electrical connection, helping restore dependable lighting for cooking and checking food. Replace a cracked, heat-darkened, or loose socket to address a light that won't turn on or flickers.

• Holds and insulates the bulb while connecting it to the microwave's wiring
• Common symptoms include no light, flickering, intermittent operation, or visible burning/cracking of the socket
• Restores solid electrical contact so the light works with the door or light switch
• Direct replacement for a damaged or worn lamp holder on select units

• Disconnect power at the breaker or unplug the appliance before servicing; microwaves contain high-voltage components
• Access location varies by model; note wire positions, transfer wires to the new holder, and secure with the original mounting hardware
• Restore power and test the light before fully reassembling

The Mounting Plate is an OEM part for LG microwaves. This part is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.

Causes of a bad Mounting Plate can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.

Symptoms of a bad Mounting Plate include:

• Loose microwave unit
• Difficulty in aligning or installing the microwave 
• Visible signs of wear, rust, or damage on the plate

This OEM LG part can also be used on Kenmore/Sears appliances.

The Microwave Mounting Hardware Kit is an OEM part for LG microwaves. This kit contains all of the necessary hardware to properly mount and install an LG microwave. It ensures that the microwave is securely fastened to the cabinet or installed above the range.

Causes of faulty mounting hardware include lack of proper installation, missing or lost pieces over time, or damage.

Symptoms of missing or damaged mounting hardware include:

• Microwave not sitting securely on the mounting plate or surface
• Movement or wobbling of the microwave during operation
• Risk of the microwave falling if not properly secured

This LG part is also compatible with some Kenmore models.

The Damper Bracket is an OEM component for LG microwaves. Located inside the microwave cavity above the wave stirrer, this bracket holds the position of the damper assembly that helps distribute heat evenly during cooking. The bracket measures approximately 12” by 5”.

Symptoms of a bad damper bracket can include:  

• Hot or cold spots developing within the microwave cavity
• Looseness in the damper assembly fit
• Reduced heat circulation leading to uneven cooking

Causes typically consist of cracking over long-term heat exposure. Repeated opening/closing of the damper may also weaken attachment points on the bracket.

This OEM LG part is also compatible with Sears/Kenmore microwaves. 

The Damper is an OEM component for LG microwaves. Located within the cooking cavity, it regulates airflow and safely vents steam escaping heated foods. 

Causes of a faulty damper can involve standard wear and exposure accepting steam and condensation release. Food or liquid particles drying within tracks also threaten eventual adhesion issues restricting travel if left unaddressed between cleanings.

Symptoms of a damaged or defective damper include:

• Inability to adequately vent excess moisture from heating  
• Potential messes spilling beyond the microwave frame  
• Grating sounds or squeaks emitting during cooking
• Flaps possibly stuck inhibiting steam circulation 

This damper is also compatible with Kenmore microwaves as well.