Kenmore Washer 110.46472501 (11046472501, 110 46472501) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135699
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.
This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
Do-It-Yourself Stories from Customers like You
Broken spider assembly; aka washer drum shaft assembly Jeff J. • Los Angeles , CA • November 01, 2015
I followed Matt's awesome video from AppliancePartsPros.com to build up my "I can do this" reserves. But here's the story leading up to that point...
We purchased our Samsung WF419 on a “Black Friday” special November 2009 expecting to get some good years out of the washer/dryer pair. We don’t run more than 2 or 3 loads a week in the washer, so ours has had relatively little use over the beginning of its anticipated and expected long life-cycle. When the “thumping” started on the spin cycle a...
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10730972
The Water Pump is an OEM replacement part for Whirlpool washing machines. It plays a key pump function by introducing water into the wash tub. Proper water circulation is necessary for effective cleaning.
Symptoms of a faulty pump include:
- Slow or no water filling during wash cycles
- Water leaks or drips due to cracked pump housing
- Loud grinding or knocking noises during operation
- Error codes for water fill related issues
Causes of pump failure can be due to regular usage over time, mineral buildup inhibiting flow inside the pump, or cracks developing in the plastic housing exposing internal components to corrosion.
This OEM Whirlpool replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Will not drain
-
Noisy
-
Burning smell
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
Loud noise when washer was in a drain cycle Robert G. • Clayton , NC • January 03, 2016
There was a loud noise from my washer during the drain cycle. (The washer seemed to drain just fine.) It was pretty easy to determine that the noise was coming from the drain pump. (Which for my washer is behind the front lower inspection panel on the right side front.) I inspected the outside of the pump for any physical damage and verified no issues with the pump or the mounts. Everything seemed ok. I then checked the drain pump filter(You will need something to catch water if you do...
Read more
More
$108.65
- Compare At:
-
$155.00
- You Save:
-
$46.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10111435
The Door Bellow Seal is an OEM part for Whirlpool front-load washing machines. It forms a flexible seal between the door and the washing machine drum, preventing water from leaking out during operation.
Symptoms of a bad Door Bellow Seal include:
- Water leaking from the front of the machine during or after a wash cycle.
- The presence of mold or mildew on the bellow, which can cause odors.
- Visible tears, punctures, or deformities in the bellow material.
Causes of a bad door bellow seal can include regular wear and tear from washing cycles, exposure to harsh laundry detergents or chemicals that degrade the rubber, and physical damage from clothing zippers or sharp objects left in clothes.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The door boot seal was old and mildued Igno F. • Scotts Valley , CA • July 27, 2014
I followed the very well made repair video for this particular part. The total time it took for the repair was under 20 minutes. But I have a suggestion for the repair video and that is to emphasize that when reinstalling boot. Have the tachnician point out that there are drain holes in the boot that need to be situated and reattached toward the bottom of the washer chassis. Unfortunately I had to redue and double the repair time because the wash water would not drain properly during wash...
Read more
More
$103.95
- Compare At:
-
$126.94
- You Save:
-
$22.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10253483
The Door Latch Assembly is an OEM part for Whirlpool washing machines. It is designed to secure the washer door during operation, ensuring it remains closed and locked. This assembly is crucial for the safe and effective operation of the washing machine, preventing the door from opening mid-cycle, which could result in water leaks and interruptions.
You should replace the door latch assembly if it becomes faulty. Causes of a bad door latch assembly can include regular wear and tear, damage from forceful closing or opening, or electrical issues within the latch mechanism. A malfunctioning door latch can prevent the washer from operating correctly.
Symptoms of a bad door latch assembly include:
- The washer door not latching or locking properly
- The washing machine not starting or stopping mid-cycle
- Error codes related to door lock issues
- Difficulty in opening or closing the door
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Lid or door will not open
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Whirlpool duet washer kept stopping at random times with no error codes Joseph L. • Hawthorne , CA • April 17, 2015
Did lots of internet research. Narrowed problem down to three things - door lock latch, control unit, and motor control unit. Figured out how to run the diagnostic test program, which showed a F22 (door lock) error. Removed and ohm tested the door lock (pins 1 & 3). Found door lock latch to be defective. ordered new one and installed it. YouTube video helped a lot. https://www.youtube.com/watch?v=_SjU6k5bpSs So far, so good. Have only done a few loads. New door lock latch tested fine.
Read more
More
$133.28
- Compare At:
-
$157.27
- You Save:
-
$23.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540221
The Washer Door Strike is an OEM part for Whirlpool washing machines. It serves as a component in the locking mechanism of the washer door, engaging with the door latch to secure the door during operation. This ensures that the machine can safely perform its cycles without risk of opening mid-wash, which could result in water spills and interrupted washing processes.
Symptoms of a failing Washer Door Strike include:
- The washer door not closing or latching properly
- Water leaking from the front of the machine
- The washing machine refusing to start due to the door not being recognized as closed
Causes of damage to the door strike typically involve physical impacts, such as slamming the door too hard, or general wear and tear that degrades the integrity of the strike over time.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Lid or door won't close
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Door latch broke while closing door Julie L. • Modesto , CA • March 13, 2016
I removed the two screws and all the pieces that were broken. Went online to Appliance parts.com, searched for the part using the model number from the machine and ordered the part . part arrived in 2 days and with a Phillips screwdriver was installed in less than 5 minutes.
Read more
More
$11.49
- Compare At:
-
$13.56
- You Save:
-
$2.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540751
The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer during the fill cycles, ensuring that the correct amount of water enters the tub for washing and rinsing. This valve is crucial for the proper functioning of the washing machine, as it regulates the water temperature and flow.
Causes of a bad water inlet valve can include mineral deposits from hard water, wear and tear over time, or electrical malfunctions. These issues can cause the valve to either not open or close properly, leading to water flow problems.
Symptoms of a bad Water Inlet Valve include:
- The washer not filling with water
- Slow fill cycles
- Water leaking from the valve
- Incorrect water temperature during cycles
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not fill with water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Whirlpool duet showing an f20 code Cheryl T. • Chino Hills , CA • January 28, 2017
The F20 code was low/no water pressure code. I watched a YouTube video and purchased a Water Inlet Valve from Appliance Pros. After my son installed the new part my washer still didn't work. I looked on Google for trouble shooting and the 1st thing it said was turn on both hot/cold water as the washer needs the pressure of the hot/cold water. I had turned off the hot valve because it was leaking. I assumed I could still do cold water loads.
Read more
More
$50.31
- Compare At:
-
$67.68
- You Save:
-
$17.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540108
The Inner Bellow Clamp is an OEM part for Whirlpool washing machines. It secures the inner bellow, or door boot seal, in place, ensuring a tight fit and preventing leaks from the washer drum during operation. The clamp has a diameter of approximately 18 inches.
Over time, the inner bellow clamp can wear out or become damaged due to repeated exposure to water, detergent, and the constant movement of the washing machine drum. If the clamp loses its tension or breaks, it may result in leaks and improper sealing of the door boot.
Symptoms of a bad inner bellow clamp include:
- Water leaks from the door area
- The door boot seal appears loose or out of place
- Visible damage or rust on the clamp
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leak on floor Dawn P. • Byron , NY • April 18, 2017
Watched a youtube video and it was easy to do.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W11032829
The Washer Clamp is an OEM component specifically designed for Whirlpool washing machines. It secures important internal components, such as hoses, to the washer tub during operation. Precise alignment and sufficient tightness are essential for leak-free function.
Causes of a bad clamp can include cracks, breaks or missing segments from extended use under pressure. Mineral buildup or corrosion over time may also weaken the clamp material.
Symptoms of a bad clamp include:
- Vibrations or noises from loose or incorrectly positioned components
- Water leaks inside the washer from disconnected or poorly sealed hoses
- Reduced efficiency and improper filling or draining issues
This genuine OEM replacement, part is also compatible with other major brands like Maytag, KitchenAid and the brands of Sears Kenmore.
Do-It-Yourself Stories from Customers like You
Front load washer leaking from door Robert S. • Agoura , CA • December 30, 2014
Followed your video instructions. It was invaluable. The toughest part was getting the seal on the back of the drum. Your technician made it look very easy. Once that was on, the rest was pretty easy. The control panel on my Whirlpool Duet washer had a holding screw at the bottom center of it. It wasn't shown in the video, but it was easy to figure out. If you are changing the boot, change the clamp as well.
Read more
More
$19.95
- Compare At:
-
$23.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.
Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.
Symptoms indicating the need for Appliance Touchup Paint include:
- Visible scratches or chips on the appliance surface
- Areas of exposed metal prone to rust
- Blemishes that affect the overall aesthetic of the appliance
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$12.55
- Compare At:
-
$15.06
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10001130
The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.
Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.
Symptoms of a bad Front Leveling Foot include:
- The washing machine rocking or wobbling during operation
- Increased vibration and noise
- The washer being unlevel, affecting wash performance
- Difficulty in adjusting the foot
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle Carl W. • Glendale , AZ • June 27, 2015
REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS...
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.
Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Leaks at the hose connection points
- Hoses slipping off the connections
- Visible rust or damage on the clamp
- Reduced appliance efficiency due to leaks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540101
The Drive Belt is an OEM part for Whirlpool washing machines. It transmits power from the washer motor to the tub, causing it to rotate during wash and spin cycles
Causes of a worn drive belt can include repetitive cycles over years of use. The belt undergoes stress each time the tub is set in motion. Damage from slipping off pulleys during operation can also affect the belt.
Symptoms of a bad drive belt include:
- The tub failing to turn or rotate during cycles
- Abnormal noises coming from the drive system
- Looseness, cracks, or visible wear to the drive belt itself
- Reduced tub movement even when the cycle is running
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken belt Victor A. • Davenport , IA • July 07, 2014
Using a nut driver I removed the sheet metal screws, removed the old belt and replaced it with the one. An easy repair. Shipping was EXCELLENT!
Read more
More
$40.95
- Compare At:
-
$49.14
- You Save:
-
$8.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10467289
The Water Temperature Sensor is an OEM part for Whirlpool washing machines. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle. Note: The sensor does not include the seal WP8540766. Order separately if needed.
Causes of a bad temperature sensor can be failures over time due to mechanical wear, thermal stress on electronic components, or damage from leaks/flooding inside the unit.
Symptoms of a bad water temperature sensor include:
- Inability to switch between wash steps or advance through the cycle
- Erratic or inconsistent temperature readings
- Failure alarms or error codes displayed
- Improper or incomplete washing even on high heat settings
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
F2 e3 error code on front load duet washer Mark M. • Saratoga Springs , NY • September 16, 2016
Replace the water temperature sensor and still had the error code. While I had the back of the machine open I ran the washer. I traced the black wires from the temperature sensor and wiggled them as the washer was running. At one zip tie every time i moved the wires the washer would stop running and the error code would flash. Sure enough, like many others posted, the vibration from the machine had split the wire. I spiced the wire back together and have not had a problem since.
Read more
More
$33.46
- Compare At:
-
$39.48
- You Save:
-
$6.02
Genuine Whirlpool part
By: Whirlpool
Part Number: W11366227
The Dispenser Hose is an OEM replacement part for Whirlpool washing machines. This hose is integral in the detergent dispensing system, channeling liquid detergent and other washing agents from the dispenser to the wash drum. It ensures that cleaning agents are efficiently delivered to the laundry load at the appropriate time during the wash cycle.
Symptoms of a bad Dispenser Hose include:
- Leakage of detergent or water from the dispenser
- Detergent not being dispensed into the wash drum
- Residual detergent left in the dispenser after the wash cycle
- Unusual sounds, like gurgling or splashing, during detergent dispensing
Causes for a malfunctioning Dispenser Hose can include blockages from accumulated detergent residue, cracks or holes in the hose, or issues with the connectors that attach it to the dispenser and drum.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Washing machine leaking from water inlet and temperature sensor seal Richard H. • Park Ridge , NJ • March 21, 2015
Removed the leaking hoses and seal. Installed the new ones. They all fit perfectly. The disassembly/reassembly of the washer took the most time.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59