Kenmore Washer 110.92291100 (11092291100, 110 92291100) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10838408
This motor shield protects and secures the appliance motor assembly, helping block debris and contact with nearby components so the motor can run reliably. It's a direct-fit replacement for a damaged or missing motor shield. What it does
- Shields the motor from debris and foreign objects that can cause rubbing or obstruction.
- Helps secure and position the motor within the cabinet to maintain proper alignment.
- Reduces risk of contact between the motor and other parts that can cause noise or wear.
- Replacing a cracked or missing shield can prevent recurring motor issues and reduce abnormal sounds.
What's included One motor shield. Install notes
- Disconnect power to the appliance before beginning any repair.
- Use basic hand tools; avoid forcing fasteners or damaging adjacent components.
- Wear gloves to protect against sharp edges on the shield or mounting area.
Do-It-Yourself Stories from Customers like You
Rusted motor shield that had rotted away James N. • Gastonia , NC • February 16, 2015
The repair was simple. Having used Appliance Parts Pro in the past for much needed repair parts, I simply unplugged the machine, turned off the water and removed the drain hose and slid unit forward. I then removed the top control panel like last time, tilted the body forward and set it aside. I unfastened the upper hose to the water pump and slid what was left of the old shield out and slid the new replacement shield back into place then reattached the flex hose. The shield slipped right...
Read more
More
$23.95
- Compare At:
-
$28.26
- You Save:
-
$4.31
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62747
Rear panel pad cushions and insulates the appliance's rear cabinet to reduce vibration, noise and rubbing against the back panel. Replacing a damaged pad helps stop rattles and protects internal components from wear. What it does:
- Provides rear-cabinet cushioning and thermal/abrasion protection for the back panel.
- Dampens vibration and reduces operational noise.
- Prevents direct metal-to-metal contact that can cause rubbing or wear.
- Common symptom fix: reduces rattling or vibrating noises from the appliance rear.
What's included: One rear panel pad. Install notes:
- Always disconnect power (and gas, if applicable) before starting any repair.
- Remove the rear access panel to access the pad; replace using the original mounting points, adhesive or clips.
- Inspect surrounding insulation and mounting hardware; replace any damaged fasteners.
More
$15.95
- Compare At:
-
$19.14
- You Save:
-
$3.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 357030
Use with motor 357282.
Do-It-Yourself Stories from Customers like You
Whirlpool washer making a whining noise while going to spin cycle Micheal S. • Clermont , GA • August 05, 2015
Replaced the clutch and water pump
Read more
More
$14.56
- Compare At:
-
$17.18
- You Save:
-
$2.62
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 285654
This miscellaneous parts kit provides a selection of small hardware and replacement pieces used in appliance repairs, so you have the fasteners and clips commonly needed to secure panels and components during service. What it does:
- Supplies assorted fasteners, clips, and small hardware used across multiple repair steps
- Replaces missing or damaged mounting hardware that can cause loose panels or rattling
- Helps complete repairs without waiting for individual screw or clip orders
- Useful for routine maintenance and reassembly after component replacement
What's included:
- One miscellaneous parts kit (assorted small hardware)
Install notes:
- Use only the pieces that match the original hardware and fit securely; do not force fasteners
- Power off and disconnect the appliance before beginning any repair
- Keep small parts away from children and pets; handle sharp edges carefully
- If a specific OEM fastener or clip is required, verify fit with the appliance's parts diagram
More
$14.45
- Compare At:
-
$17.34
- You Save:
-
$2.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 285771
Used for direct drive washing machines. Complete assembly includes 2 level mechanism links, 1 level mechanism spring, 1 knurled pin, 2 rear feet, 1 pad plate, 1 suspension plate, 1 base pad, and 1 suspension spring retainer.
Do-It-Yourself Stories from Customers like You
Base supports and legs were rusted and broken Matthew D. • West Middlesex , PA • January 14, 2019
I ordered a Base frame assembly and front leveling feet along with locking nuts. I removed the broken parts by putting the washer on its' side and I removed the bolts on the bottom of the back panel and removed the motor and the transmission. I installed the new feet onto the new base frame and i slid the new frame into place and then I reattached everything.
Read more
More
$268.27
- Compare At:
-
$319.24
- You Save:
-
$50.97
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 353424
$15.60
- Compare At:
-
$18.56
- You Save:
-
$2.96
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 64170
Do-It-Yourself Stories from Customers like You
Vacuum break inlet hose hose leaking David F. • Vallejo , CA • March 10, 2021
Replaced Hoses. Works Great.
Read more
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 799344
Color: White. Size: 1 qt. can. Acrylic appliance paint.
More
$102.95
- Compare At:
-
$121.48
- You Save:
-
$18.53
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP389379
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8528351
$46.95
- Compare At:
-
$56.34
- You Save:
-
$9.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3948608
$38.24
- Compare At:
-
$42.10
- You Save:
-
$3.86
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 285321
$25.79
- Compare At:
-
$30.94
- You Save:
-
$5.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP64065
Do-It-Yourself Stories from Customers like You
The tub in my washer was unbalanced all of the time Linda J. • Beaverton , MI • October 26, 2014
Replaced 4 of the suspension springs with new brackets. I looked up my washer, looked at the diagrams, watched your video which made things a lot easier! Took the washer apart, found the problem, ordered the parts from you and the washer was put back together and working within 3 days! Love your website! This is also the second time we have used your website and were extremely happy both times! Saved us a lot of money!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8529896
Installation instructions included.
Do-It-Yourself Stories from Customers like You
You could here the motor try to start but nthen just hum John H. • Brockton , MA • September 10, 2015
Found the motor switch was fried. So replaced that and the capacitor. Starts fine now.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP387402
Used for control panel.
Do-It-Yourself Stories from Customers like You
Kenmore washer would not spin and made a grinding noise Gregory B. • Wappingers Falls , NY • January 17, 2015
Replaced direct drive washer motor coupling. Instructional video was right on and easy to follow. Was able to save a 15 year old machine for a few bucks. The shipping was super fast (within 2 days) and the customer service is fabulous. I would definitely recommend to everyone.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 280184
Do-It-Yourself Stories from Customers like You
A bunch of things. Leaking, clutch was slipping and not spinning very well, and the brake was not engaging.. Alan V. • Melrose Park , IL • November 11, 2022
I installed all the necessary parts that I received from you and it works great, now. I received the parts in good time without overnighting them. I had the whole washing machine apart and went through it all before ordering parts. Tear down and assembly was easy. I just took my time. The washer is 17 years old and was well built. It was worth it compared to what is on the market today, and cheaper.
Read more
More