Sherry A December 05, 2022 for Model Number J 501R3BR 3.8 YR165784 Hello! I can't find my model number on your website, so I gave you all the information on the oven id plate. This is a ca 1958 wall oven. The lower element went out this weekend and I want to replace it. The width of the element is 19.25", depth 15" and it connects with two flat bladed terminals out the back at 2.5" length. Can you recommend a replacement?
Enola B October 09, 2022 for Model Number JB960W3WW Wanted to make sure this was the correct part number for the broiler element? Ours went out. Thank you! Broil Element WB44X173 / AP2031021
1 Answer Enola B, Based on the model number provided the broil element should be WB44X10015 Read More...
B Kinsella August 24, 2022 for Model Number JBP26W0B1WW I need a new broiler unit for this oven. Model JBP26W0B1WW
Scott August 14, 2022 for Model Number JKP07GJ5BG The broil unit has gone out in this unit. Is WB44X173 the correct replacement part for this oven? The oven is roughly 32-33 years old, Thank you,
Don Bliss March 13, 2022 for Model Number Kenmore Model # 850.42-27824 Do you have a bake element for this 50+ year old Kenmore wall mount oven? The old element is stamped "Chromalox 874367, 240V, 1800W" The termination ends going into the oven are spaced 1-3/4" center to center, and extend 3" past the mounting plate, with another inch for the termination lug. From mounting plate to front end of the element is 16-1/2", and side to side is 15-3/8". There is about a one inch drop down at the oven side of the mounting plate. Thanks much for any help.
1 Answer Don, The part number for the element will be CH5834 Unforutnately, it has been discontinued by the manufacturer with no suitable replacement available. Read More...
Linda December 13, 2021 for Model Number JBP80W0K3WW What part number would be compatableto my model number.
1 Answer Hello Linda, since you did not state what part you were looking for for your model, most times it is for the oven, as such the bake element WB44T10011 and the broil element is WB44T10009. Read More...
Steve November 29, 2021 for Model Number JRP03G007BG / LR647518G Model #: J RP03G007BG (I cant tell if the 0's are numeric zero or letter O) Serial #: LR647518G A GE electric wall oven, 24 inch width: very old, from either 1994 or 1982 according to the serial number prefix LR. Both bake and broil elements stopped working. If the correct parts can be identified I would like to try to replace both elements because it is difficult to find replacement ovens in stock now, presumably due to supply chain issues. Can you tell me the right bake & broil elements for this oven? Also, do you know if the door on this oven be removed to make working on the elements easier? It may not be possible to do otherwise. I can attach a photo if that would be helpful. Thanks for your time and assistance, and best regards
1 Answer Steve, The part number for the bake element will be WB44X200 and the broil element will be WB44X173. Read More...
Maureen November 13, 2021 for Model Number Jk2201av We are replacing the broil element, which was easy to purchase, but the original heat-resistant gasket broke during re-installation. Where can I find another?
1 Answer Hello Maureen, If you are referring to the door gasket, the replacement part number is WB2X2058. If this is not what you are referring to we will need to ask you to please post a new question specifying the gasket that has broken. Thank you for your patience and understanding in this matter. Read More...
Steve October 04, 2021 for Model Number JKP360D2AD Wondering what top/broiler element I need for my wall mounted GE oven?
1 Answer Steve, the broil element WB44X173 would be used for the upper oven of the model number provided. Read More...
Donna September 24, 2021 for Model Number J MP22 002 WH If I replace the broiler element which appears to have broken and I believe that to be the only visible problem and the breaker switched off...however the entire unit is not currently working is there something else that might be the problem like a fuse? The stove is hard wired and a drop in unit
1 Answer Hello Donna, when the broil element failed it caused a short circuit that tripped the circuit breaker. However the entire stove should not have been affected once the breaker was reset, there may have been some damage to electrical components, such as the oven thermostat and all other parts, unfortunately, we do not have a wiring schematic for this model to assist you. Suggest you contact a service tech or someone with a multimeter and technical knowledge who can check further. Read More...